QCompleter Class

A QCompleter is used typically with a QLineEdit or QComboBox. For example, here's how to provide auto completions from a simple word list in a QLineEdit:

QStringList wordList;
wordList << "alpha" << "omega" << "omicron" << "zeta";

QLineEdit *lineEdit = new QLineEdit(this);

QCompleter *completer = new QCompleter(wordList, this);
completer->setCaseSensitivity(Qt::CaseInsensitive);
lineEdit->setCompleter(completer);

A QFileSystemModel can be used to provide auto completion of file names. For example:

QCompleter *completer = new QCompleter(this);
completer->setModel(new QFileSystemModel(completer));
lineEdit->setCompleter(completer);

To set the model on which QCompleter should operate, call setModel(). By default, QCompleter will attempt to match the completion prefix (i.e., the word that the user has started typing) against the Qt::EditRole data stored in column 0 in the model case sensitively. This can be changed using setCompletionRole(), setCompletionColumn(), and setCaseSensitivity().

If the model is sorted on the column and role that are used for completion, you can call setModelSorting() with either QCompleter::CaseSensitivelySortedModel or QCompleter::CaseInsensitivelySortedModel as the argument. On large models, this can lead to significant performance improvements, because QCompleter can then use binary search instead of linear search. The binary search only works when the filterMode is Qt::MatchStartsWith.

The model can be a list model, a table model, or a tree model. Completion on tree models is slightly more involved and is covered in the Handling Tree Models section below.

The completionMode() determines the mode used to provide completions to the user.

To retrieve a single candidate string, call setCompletionPrefix() with the text that needs to be completed and call currentCompletion(). You can iterate through the list of completions as below:

for (int i = 0; completer->setCurrentRow(i); i++)
    qDebug() << completer->currentCompletion() << " is match number " << i;

completionCount() returns the total number of completions for the current prefix. completionCount() should be avoided when possible, since it requires a scan of the entire model.

completionModel() return a list model that contains all possible completions for the current completion prefix, in the order in which they appear in the model. This model can be used to display the current completions in a custom view. Calling setCompletionPrefix() automatically refreshes the completion model.

QCompleter can look for completions in tree models, assuming that any item (or sub-item or sub-sub-item) can be unambiguously represented as a string by specifying the path to the item. The completion is then performed one level at a time.

Let's take the example of a user typing in a file system path. The model is a (hierarchical) QFileSystemModel. The completion occurs for every element in the path. For example, if the current text is C:\Wind, QCompleter might suggest Windows to complete the current path element. Similarly, if the current text is C:\Windows\Sy, QCompleter might suggest System.

For this kind of completion to work, QCompleter needs to be able to split the path into a list of strings that are matched at each level. For C:\Windows\Sy, it needs to be split as "C:", "Windows" and "Sy". The default implementation of splitPath(), splits the completionPrefix using QDir::separator() if the model is a QFileSystemModel.

To provide completions, QCompleter needs to know the path from an index. This is provided by pathFromIndex(). The default implementation of pathFromIndex(), returns the data for the edit role for list models and the absolute file path if the mode is a QFileSystemModel.

See also QAbstractItemModel, QLineEdit, QComboBox, Completer Example

This enum specifies how completions are provided to the user.

See Also▲

This enum specifies how the items in the model are sorted.

See Also▲

This property holds the case sensitivity of the matching

The default value is Qt::CaseSensitive.

Access functions:

• caseSensitivity() const

• void setCaseSensitivity( caseSensitivity)

See Also▲

This property holds the column in the model in which completions are searched for.

If the popup() is a QListView, it is automatically setup to display this column.

By default, the match column is 0.

Access functions:

• int completionColumn() const

• void setCompletionColumn(int column)

See Also▲

how the completions are provided to the user

The default value is QCompleter::PopupCompletion.

Access functions:

• completionMode() const

• void setCompletionMode( mode)

This property holds the completion prefix used to provide completions.

The completionModel() is updated to reflect the list of possible matches for prefix.

Access functions:

• completionPrefix() const

• void setCompletionPrefix(const &prefix)

This property holds the item role to be used to query the contents of items for matching.

The default role is Qt::EditRole.

Access functions:

• int completionRole() const

• void setCompletionRole(int role)

See Also▲

This property controls how filtering is performed.

If filterMode is set to Qt::MatchStartsWith, only those entries that start with the typed characters will be displayed. Qt::MatchContains will display the entries that contain the typed characters, and Qt::MatchEndsWith the ones that end with the typed characters.

Setting filterMode to any other Qt::MatchFlag will issue a warning, and no action will be performed. Because of this, the Qt::MatchCaseSensitive flag has no effect. Use the caseSensitivity property to control case sensitivity.

The default mode is Qt::MatchStartsWith.

This property was introduced in Qt 5.2.

Access functions:

• filterMode() const

• void setFilterMode( filterMode)

See Also▲

This property holds the maximum allowed size on screen of the completer, measured in items

By default, this property has a value of 7.

Access functions:

• int maxVisibleItems() const

• void setMaxVisibleItems(int maxItems)

This property holds the way the model is sorted

By default, no assumptions are made about the order of the items in the model that provides the completions.

If the model's data for the completionColumn() and completionRole() is sorted in ascending order, you can set this property to CaseSensitivelySortedModel or CaseInsensitivelySortedModel. On large models, this can lead to significant performance improvements because the completer object can then use a binary search algorithm instead of linear search algorithm.

The sort order (i.e ascending or descending order) of the model is determined dynamically by inspecting the contents of the model.

Note: The performance improvements described above cannot take place when the completer's caseSensitivity is different to the case sensitivity used by the model's when sorting.

Access functions:

• modelSorting() const

• void setModelSorting( sorting)

See Also▲

This property holds the completions wrap around when navigating through items

The default is true.

Access functions:

• bool wrapAround() const

• void setWrapAround(bool wrap)

Constructs a completer object with the given parent.

Constructs a completer object with the given parent that provides completions from the specified model.

Constructs a QCompleter object with the given parent that uses the specified list as a source of possible completions.

Destroys the completer object.

This signal is sent when an item in the popup() is activated by the user (by clicking or pressing return). The item's text is given.

This signal is sent when an item in the popup() is activated by the user. (by clicking or pressing return). The item's index in the completionModel() is given.

For QCompleter::PopupCompletion and QCompletion::UnfilteredPopupCompletion modes, calling this function displays the popup displaying the current completions. By default, if rect is not specified, the popup is displayed on the bottom of the widget(). If rect is specified the popup is displayed on the left edge of the rectangle.

For QCompleter::InlineCompletion mode, the highlighted() signal is fired with the current completion.

Returns the number of completions for the current prefix. For an unsorted model with a large number of items this can be expensive. Use setCurrentRow() and currentCompletion() to iterate through all the completions.

Returns the completion model. The completion model is a read-only list model that contains all the possible matches for the current completion prefix. The completion model is auto-updated to reflect the current completions.

See Also▲

Returns the current completion string. This includes the completionPrefix. When used alongside setCurrentRow(), it can be used to iterate through all the matches.

See Also▲

Returns the model index of the current completion in the completionModel().

See Also▲

Returns the current row.

See Also▲

Reimplements: QObject::event(QEvent *e).

Reimplements: QObject::eventFilter(QObject *watched, QEvent *event).

This signal is sent when an item in the popup() is highlighted by the user. It is also sent if complete() is called with the completionMode() set to QCompleter::InlineCompletion. The item's text is given.

This signal is sent when an item in the popup() is highlighted by the user. It is also sent if complete() is called with the completionMode() set to QCompleter::InlineCompletion. The item's index in the completionModel() is given.

Returns the model that provides completion strings.

See Also▲

Returns the path for the given index. The completer object uses this to obtain the completion text from the underlying model.

The default implementation returns the edit role of the item for list models. It returns the absolute file path if the model is a QFileSystemModel.

See Also▲

Returns the popup used to display completions.

See Also▲

Sets the current row to the row specified. Returns true if successful; otherwise returns false.

This function may be used along with currentCompletion() to iterate through all the possible completions.

See Also▲

Sets the model which provides completions to model. The model can be list model or a tree model. If a model has been already previously set and it has the QCompleter as its parent, it is deleted.

For convenience, if model is a QFileSystemModel, QCompleter switches its caseSensitivity to Qt::CaseInsensitive on Windows and Qt::CaseSensitive on other platforms.

See Also▲

Sets the popup used to display completions to popup. QCompleter takes ownership of the view.

A QListView is automatically created when the completionMode() is set to QCompleter::PopupCompletion or QCompleter::UnfilteredPopupCompletion. The default popup displays the completionColumn().

Ensure that this function is called before the view settings are modified. This is required since view's properties may require that a model has been set on the view (for example, hiding columns in the view requires a model to be set on the view).

See Also▲

Sets the widget for which completion are provided for to widget. This function is automatically called when a QCompleter is set on a QLineEdit using QLineEdit::setCompleter() or on a QComboBox using QComboBox::setCompleter(). The widget needs to be set explicitly when providing completions for custom widgets.

See Also▲

Splits the given path into strings that are used to match at each level in the model().

The default implementation of splitPath() splits a file system path based on QDir::separator() when the sourceModel() is a QFileSystemModel.

When used with list models, the first item in the returned list is used for matching.

See Also▲

Returns the widget for which the completer object is providing completions.

See Also▲