QGeoPositionInfoSource Class▲
-
Header: QGeoPositionInfoSource
-
Since: Qt 5.2
-
CMake:
find_package(Qt6 REQUIRED COMPONENTS Positioning)
target_link_libraries(mytarget PRIVATE Qt6::Positioning)
-
qmake: QT += positioning
-
Inherits: QObject
-
Inherited By: QNmeaPositionInfoSource
-
Group: QGeoPositionInfoSource is part of QtPositioning-positioning
Detailed Description▲
The static function QGeoPositionInfoSource::createDefaultSource() creates a default position source that is appropriate for the platform, if one is available. Otherwise, QGeoPositionInfoSource will check for available plugins that implement the QGeoPositionInfoSourceFactory interface.
Users of a QGeoPositionInfoSource subclass can request the current position using requestUpdate(), or start and stop regular position updates using startUpdates() and stopUpdates(). When an update is available, positionUpdated() is emitted. The last known position can be accessed with lastKnownPosition().
If regular position updates are required, setUpdateInterval() can be used to specify how often these updates should be emitted. If no interval is specified, updates are simply provided whenever they are available. For example:
// Emit updates every 10 seconds if available
QGeoPositionInfoSource *source = QGeoPositionInfoSource::createDefaultSource(0);
if (source)
source->setUpdateInterval(10000);To remove an update interval that was previously set, call setUpdateInterval() with a value of 0.
The position source may have a minimum value requirement for update intervals, as returned by minimumUpdateInterval().
To use this class from Android service, see Qt Positioning on Android.
Member Type Documentation▲
enum QGeoPositionInfoSource::Error▲
The Error enumeration represents the errors which can occur.
|
Constant |
Value |
Description |
|---|---|---|
|
QGeoPositionInfoSource::AccessError |
0 |
The connection setup to the remote positioning backend failed because the application lacked the required privileges. |
|
QGeoPositionInfoSource::ClosedError |
1 |
The remote positioning backend closed the connection, which happens for example in case the user is switching location services to off. As soon as the location service is re-enabled regular updates will resume. |
|
QGeoPositionInfoSource::NoError |
3 |
No error has occurred. |
|
QGeoPositionInfoSource::UnknownSourceError |
2 |
An unidentified error occurred. |
|
QGeoPositionInfoSource::UpdateTimeoutError (since Qt 6.2) |
4 |
If requestUpdate() was called, this error indicates that the current position could not be retrieved within the specified timeout. If startUpdates() was called, this error indicates that this QGeoPositionInfoSource subclass determined that it will not be able to provide further regular updates. In the latter case the error would not be emitted again until after the regular updates resume. |
enum QGeoPositionInfoSource::PositioningMethod▲
flags QGeoPositionInfoSource::PositioningMethods
Defines the types of positioning methods.
|
Constant |
Value |
Description |
|---|---|---|
|
QGeoPositionInfoSource::NoPositioningMethods |
0x00000000 |
None of the positioning methods. |
|
QGeoPositionInfoSource::SatellitePositioningMethods |
0x000000ff |
Satellite-based positioning methods such as GPS or GLONASS. |
|
QGeoPositionInfoSource::NonSatellitePositioningMethods |
0xffffff00 |
Other positioning methods such as 3GPP cell identifier or WiFi based positioning. |
|
QGeoPositionInfoSource::AllPositioningMethods |
0xffffffff |
Satellite-based positioning methods as soon as available. Otherwise non-satellite based methods. |
The PositioningMethods type is a typedef for QFlags<PositioningMethod>. It stores an OR combination of PositioningMethod values.
Property Documentation▲
[read-only] minimumUpdateInterval : const int▲
This property holds the minimum time (in milliseconds) required to retrieve a position update.
This is the minimum value accepted by setUpdateInterval() and requestUpdate().
Access functions:
-
virtual int minimumUpdateInterval() const = 0
[bindable] preferredPositioningMethods : PositioningMethods▲
This property supports QProperty bindings.
Sets the preferred positioning methods for this source.
If new methods include a method that is not supported by the source, the unsupported method will be ignored.
If new methods do not include a single method available/supported by the source, the preferred methods will be set to the set of methods which the source has available. If the source has no method availabe (e.g. because its Location service is turned off or it does not offer a Location service), the passed methods are accepted as they are.
The default value for this property is NoPositioningMethods.
Subclass implementations must call the base implementation of setPreferredPositioningMethods() to ensure preferredPositioningMethods() returns the correct value.
See Also▲
See also supportedPositioningMethods()
[read-only] sourceName : const QString▲
This property holds the unique name of the position source implementation in use.
This is the same name that can be passed to createSource() in order to create a new instance of a particular position source implementation.
Access functions:
-
sourceName() const
[bindable] updateInterval : int▲
This property supports QProperty bindings.
This property holds the requested interval in milliseconds between each update.
If the update interval is not set (or is set to 0) the source will provide updates as often as necessary.
If the update interval is set, the source will provide updates at an interval as close to the requested interval as possible. If the requested interval is less than the minimumUpdateInterval(), the minimum interval is used instead.
Changes to the update interval will happen as soon as is practical, however the time the change takes may vary between implementations. Whether or not the elapsed time from the previous interval is counted as part of the new interval is also implementation dependent.
The default value for this property is 0.
Subclass implementations must call the base implementation of setUpdateInterval() so that updateInterval() returns the correct value.
This property can't be used to tune update frequency on iOS and macOS, because their APIs do not provide such possibility. On these systems this parameter is only used to set UpdateTimeoutError and trigger an errorOccurred signal if the update is not received within the desired interval.
Member Function Documentation▲
[explicit] QGeoPositionInfoSource::QGeoPositionInfoSource(QObject *parent)▲
Creates a position source with the specified parent.
[virtual] QGeoPositionInfoSource::~QGeoPositionInfoSource()▲
Destroys the position source.
[static] QStringList QGeoPositionInfoSource::availableSources()▲
Returns a list of available source plugins. This includes any default backend plugin for the current platform.
[virtual, since Qt 5.14] QVariant QGeoPositionInfoSource::backendProperty(const QString &name) const▲
Returns the value of the backend-specific property named name, if present. Otherwise, the returned value will be invalid. Supported backend-specific properties are listed and described in Qt Positioning plugins#Default plugins.
This function was introduced in Qt 5.14.
See Also▲
See also setBackendProperty
[static] QGeoPositionInfoSource *QGeoPositionInfoSource::createDefaultSource(QObject *parent)▲
Creates and returns a position source with the given parent that reads from the system's default sources of location data, or the plugin with the highest available priority.
Returns nullptr if the system has no default position source, no valid plugins could be found or the user does not have the permission to access the current position.
[static, since Qt 5.14] QGeoPositionInfoSource *QGeoPositionInfoSource::createDefaultSource(const QVariantMap ¶meters, QObject *parent)▲
Creates and returns a position source with the given parent that reads from the system's default sources of location data, or the plugin with the highest available priority.
Returns nullptr if the system has no default position source, no valid plugins could be found or the user does not have the permission to access the current position.
This method passes parameters to the factory to configure the source.
This function was introduced in Qt 5.14.
[static] QGeoPositionInfoSource *QGeoPositionInfoSource::createSource(const QString &sourceName, QObject *parent)▲
Creates and returns a position source with the given parent, by loading the plugin named sourceName.
Returns nullptr if the plugin cannot be found.
[static, since Qt 5.14] QGeoPositionInfoSource *QGeoPositionInfoSource::createSource(const QString &sourceName, const QVariantMap ¶meters, QObject *parent)▲
Creates and returns a position source with the given parent, by loading the plugin named sourceName.
Returns nullptr if the plugin cannot be found.
This method passes parameters to the factory to configure the source.
This function was introduced in Qt 5.14.
[pure virtual] QGeoPositionInfoSource::Error QGeoPositionInfoSource::error() const▲
Returns the type of error that last occurred.
Since Qt6 the last error is always reset when calling startUpdates() or requestUpdate().
void QGeoPositionInfoSource::errorOccurred(QGeoPositionInfoSource::Error positioningError)▲
This signal is emitted after an error occurred. The positioningError parameter describes the type of error that occurred.
[pure virtual] QGeoPositionInfo QGeoPositionInfoSource::lastKnownPosition(bool fromSatellitePositioningMethodsOnly = false) const▲
Returns an update containing the last known position, or a null update if none is available.
If fromSatellitePositioningMethodsOnly is true, this returns the last known position received from a satellite positioning method; if none is available, a null update is returned.
void QGeoPositionInfoSource::positionUpdated(const QGeoPositionInfo &update)▲
If startUpdates() or requestUpdate() is called, this signal is emitted when an update becomes available.
The update value holds the value of the new update.
[pure virtual] void QGeoPositionInfoSource::requestUpdate(int timeout = 0)▲
Attempts to get the current position and emit positionUpdated() with this information. If the current position cannot be found within the given timeout (in milliseconds) or if timeout is less than the value returned by minimumUpdateInterval(), an errorOccurred() signal with the UpdateTimeoutError is emitted.
If the timeout is zero, the timeout defaults to a reasonable timeout period as appropriate for the source.
This does nothing if another update request is in progress. However it can be called even if startUpdates() has already been called and regular updates are in progress.
If the source uses multiple positioning methods, it tries to get the current position from the most accurate positioning method within the given timeout.
Since Qt6 this method always resets the last error to NoError before requesting the position.
To understand how to use this method from an Android service, see Qt Positioning on Android.
[virtual, since Qt 5.14] bool QGeoPositionInfoSource::setBackendProperty(const QString &name, const QVariant &value)▲
Sets the backend-specific property named name to value. Returns true on success, false otherwise. Backend-specific properties can be used to configure the positioning subsystem behavior at runtime. Supported backend-specific properties are listed and described in Qt Positioning plugins#Default plugins.
This function was introduced in Qt 5.14.
See Also▲
See also backendProperty
[pure virtual] void QGeoPositionInfoSource::startUpdates()▲
Starts emitting updates at regular intervals as specified by setUpdateInterval().
If setUpdateInterval() has not been called, the source will emit updates as soon as they become available.
An errorOccurred() signal with the UpdateTimeoutError will be emitted if this QGeoPositionInfoSource subclass determines that it will not be able to provide regular updates. This could happen if a satellite fix is lost or if a hardware error is detected. Position updates will recommence if the data becomes available later on. The UpdateTimeoutError error will not be emitted again until after the periodic updates resume.
Since Qt6 this method always resets the last error to NoError before starting the updates.
To understand how to use this method from an Android service, see Qt Positioning on Android.
On iOS, starting from version 8, Core Location framework requires additional entries in the application's Info.plist with keys NSLocationAlwaysUsageDescription or NSLocationWhenInUseUsageDescription and a string to be displayed in the authorization prompt. The key NSLocationWhenInUseUsageDescription is used when requesting permission to use location services while the app is in the foreground. The key NSLocationAlwaysUsageDescription is used when requesting permission to use location services whenever the app is running (both the foreground and the background). If both entries are defined, NSLocationWhenInUseUsageDescription has a priority in the foreground mode.
[pure virtual] void QGeoPositionInfoSource::stopUpdates()▲
Stops emitting updates at regular intervals.
[pure virtual] QGeoPositionInfoSource::PositioningMethods QGeoPositionInfoSource::supportedPositioningMethods() const▲
Returns the positioning methods available to this source. Availability is defined as being usable at the time of calling this function. Therefore user settings like turned off location service or limitations to Satellite-based position providers are reflected by this function. Runtime notifications when the status changes can be obtained via supportedPositioningMethodsChanged().
Not all platforms distinguish the different positioning methods or communicate the current user configuration of the device. The following table provides an overview of the current platform situation:
|
Platform |
Brief Description |
|---|---|
|
Android |
Individual provider status and general Location service state are known and communicated when location service is active. |
|
GeoClue |
Hardcoced to always return AllPositioningMethods. |
|
GeoClue2 |
Individual providers are not distinguishable but disabled Location services reflected. |
|
iOS/tvOS |
Hardcoced to always return AllPositioningMethods. |
|
macOS |
Hardcoced to always return AllPositioningMethods. |
|
Windows (UWP) |
Individual providers are not distinguishable but disabled Location services reflected. |
See Also▲
[since Qt 5.12] void QGeoPositionInfoSource::supportedPositioningMethodsChanged()▲
This signal is emitted when the supported positioning methods changed. The cause for a change could be a user turning Location services on/off or restricting Location services to certain types (e.g. GPS only). Note that changes to the supported positioning methods cannot be detected on all platforms. supportedPositioningMethods() provides an overview of the current platform support.
This function was introduced in Qt 5.12.