QMessageBox Class▲
-
Header: QMessageBox
-
CMake:
find_package(Qt6 REQUIRED COMPONENTS Widgets)
target_link_libraries(mytarget PRIVATE Qt6::Widgets)
-
qmake: QT += widgets
-
Inherits: QDialog
-
Group: QMessageBox is part of Standard Dialogs
Detailed Description▲
A message box displays a primary text to alert the user to a situation, an informative text to further explain the alert or to ask the user a question, and an optional detailed text to provide even more data if the user requests it. A message box can also display an icon and standard buttons for accepting a user response.
Two APIs for using QMessageBox are provided, the property-based API, and the static functions. Calling one of the static functions is the simpler approach, but it is less flexible than using the property-based API, and the result is less informative. Using the property-based API is recommended.
The Property-based API▲
To use the property-based API, construct an instance of QMessageBox, set the desired properties, and call exec() to show the message. The simplest configuration is to set only the message text property.
QMessageBox msgBox;
msgBox.setText("The document has been modified."
);
msgBox.exec();
The user must click the OK button to dismiss the message box. The rest of the GUI is blocked until the message box is dismissed.
A better approach than just alerting the user to an event is to also ask the user what to do about it. Store the question in the informative text property, and set the standard buttons property to the set of buttons you want as the set of user responses. The buttons are specified by combining values from StandardButtons using the bitwise OR operator. The display order for the buttons is platform-dependent. For example, on Windows, Save is displayed to the left of Cancel, whereas on Mac OS, the order is reversed.
Mark one of your standard buttons to be your default button.
QMessageBox msgBox;
msgBox.setText("The document has been modified."
);
msgBox.setInformativeText("Do you want to save your changes?"
);
msgBox.setStandardButtons(QMessageBox::
Save |
QMessageBox::
Discard |
QMessageBox::
Cancel);
msgBox.setDefaultButton(QMessageBox::
Save);
int
ret =
msgBox.exec();
This is the approach recommended in the macOS Guidelines. Similar guidelines apply for the other platforms, but note the different ways the informative text is handled for different platforms.
The exec() slot returns the StandardButtons value of the button that was clicked.
switch
(ret) {
case
QMessageBox::
Save:
// Save was clicked
break
;
case
QMessageBox::
Discard:
// Don't Save was clicked
break
;
case
QMessageBox::
Cancel:
// Cancel was clicked
break
;
default
:
// should never be reached
break
;
}
To give the user more information to help him answer the question, set the detailed text property. If the detailed text property is set, the Show Details... button will be shown.
Clicking the Show Details... button displays the detailed text.
Rich Text and the Text Format Property▲
The detailed text property is always interpreted as plain text. The main text and informative text properties can be either plain text or rich text. These strings are interpreted according to the setting of the text format property. The default setting is auto-text.
Note that for some plain text strings containing XML meta-characters, the auto-text rich text detection test may fail causing your plain text string to be interpreted incorrectly as rich text. In these rare cases, use Qt::convertFromPlainText() to convert your plain text string to a visually equivalent rich text string, or set the text format property explicitly with setTextFormat().
Severity Levels and the Icon and Pixmap Properties▲
QMessageBox supports four predefined message severity levels, or message types, which really only differ in the predefined icon they each show. Specify one of the four predefined message types by setting the icon property to one of the predefined icons. The following rules are guidelines:
For asking a question during normal operations. |
||
For reporting information about normal operations. |
||
For reporting non-critical errors. |
||
For reporting critical errors. |
Predefined icons are not defined by QMessageBox, but provided by the style. The default value is No Icon. The message boxes are otherwise the same for all cases. When using a standard icon, use the one recommended in the table, or use the one recommended by the style guidelines for your platform. If none of the standard icons is right for your message box, you can use a custom icon by setting the icon pixmap property instead of setting the icon property.
In summary, to set an icon, use either setIcon() for one of the standard icons, or setIconPixmap() for a custom icon.
The Static Functions API▲
Building message boxes with the static functions API, although convenient, is less flexible than using the property-based API, because the static function signatures lack parameters for setting the informative text and detailed text properties. One work-around for this has been to use the title parameter as the message box main text and the text parameter as the message box informative text. Because this has the obvious drawback of making a less readable message box, platform guidelines do not recommend it. The Microsoft Windows User Interface Guidelines recommend using the application name as the window's title, which means that if you have an informative text in addition to your main text, you must concatenate it to the text parameter.
Note that the static function signatures have changed with respect to their button parameters, which are now used to set the standard buttons and the default button.
Static functions are available for creating information(), question(), warning(), and critical() message boxes.
int
ret =
QMessageBox::
warning(this
, tr("My Application"
),
tr("The document has been modified.
\n
"
"Do you want to save your changes?"
),
QMessageBox::
Save |
QMessageBox::
Discard
|
QMessageBox::
Cancel,
QMessageBox::
Save);
The Standard Dialogs example shows how to use QMessageBox and the other built-in Qt dialogs.
Advanced Usage▲
If the standard buttons are not flexible enough for your message box, you can use the addButton() overload that takes a text and a ButtonRole to add custom buttons. The ButtonRole is used by QMessageBox to determine the ordering of the buttons on screen (which varies according to the platform). You can test the value of clickedButton() after calling exec(). For example,
QMessageBox msgBox;
QPushButton *
connectButton =
msgBox.addButton(tr("Connect"
), QMessageBox::
ActionRole);
QPushButton *
abortButton =
msgBox.addButton(QMessageBox::
Abort);
msgBox.exec();
if
(msgBox.clickedButton() ==
connectButton) {
// connect
}
else
if
(msgBox.clickedButton() ==
abortButton) {
// abort
}
Default and Escape Keys▲
The default button (i.e., the button activated when Enter is pressed) can be specified using setDefaultButton(). If a default button is not specified, QMessageBox tries to find one based on the button roles of the buttons used in the message box.
The escape button (the button activated when Esc is pressed) can be specified using setEscapeButton(). If an escape button is not specified, QMessageBox tries to find one using these rules:
-
If there is only one button, it is the button activated when Esc is pressed.
-
If there is a Cancel button, it is the button activated when Esc is pressed.
-
If there is exactly one button having either the Reject role or the the No role, it is the button activated when Esc is pressed.
When an escape button can't be determined using these rules, pressing Esc has no effect.
See Also▲
Member Type Documentation▲
enum QMessageBox::ButtonRole▲
This enum describes the roles that can be used to describe buttons in the button box. Combinations of these roles are as flags used to describe different aspects of their behavior.
Constant |
Value |
Description |
---|---|---|
QMessageBox::InvalidRole |
-1 |
The button is invalid. |
QMessageBox::AcceptRole |
0 |
Clicking the button causes the dialog to be accepted (e.g. OK). |
QMessageBox::RejectRole |
1 |
Clicking the button causes the dialog to be rejected (e.g. Cancel). |
QMessageBox::DestructiveRole |
2 |
Clicking the button causes a destructive change (e.g. for Discarding Changes) and closes the dialog. |
QMessageBox::ActionRole |
3 |
Clicking the button causes changes to the elements within the dialog. |
QMessageBox::HelpRole |
4 |
The button can be clicked to request help. |
QMessageBox::YesRole |
5 |
The button is a "Yes"-like button. |
QMessageBox::NoRole |
6 |
The button is a "No"-like button. |
QMessageBox::ApplyRole |
8 |
The button applies current changes. |
QMessageBox::ResetRole |
7 |
The button resets the dialog's fields to default values. |
See Also▲
See also StandardButton
enum QMessageBox::Icon▲
This enum has the following values:
Constant |
Value |
Description |
---|---|---|
QMessageBox::NoIcon |
0 |
the message box does not have any icon. |
QMessageBox::Question |
4 |
an icon indicating that the message is asking a question. |
QMessageBox::Information |
1 |
an icon indicating that the message is nothing out of the ordinary. |
QMessageBox::Warning |
2 |
an icon indicating that the message is a warning, but can be dealt with. |
QMessageBox::Critical |
3 |
an icon indicating that the message represents a critical problem. |
enum QMessageBox::StandardButton▲
flags QMessageBox::StandardButtons
These enums describe flags for standard buttons. Each button has a defined ButtonRole.
Constant |
Value |
Description |
---|---|---|
QMessageBox::Ok |
0x00000400 |
An "OK" button defined with the AcceptRole. |
QMessageBox::Open |
0x00002000 |
An "Open" button defined with the AcceptRole. |
QMessageBox::Save |
0x00000800 |
A "Save" button defined with the AcceptRole. |
QMessageBox::Cancel |
0x00400000 |
A "Cancel" button defined with the RejectRole. |
QMessageBox::Close |
0x00200000 |
A "Close" button defined with the RejectRole. |
QMessageBox::Discard |
0x00800000 |
A "Discard" or "Don't Save" button, depending on the platform, defined with the DestructiveRole. |
QMessageBox::Apply |
0x02000000 |
An "Apply" button defined with the ApplyRole. |
QMessageBox::Reset |
0x04000000 |
A "Reset" button defined with the ResetRole. |
QMessageBox::RestoreDefaults |
0x08000000 |
A "Restore Defaults" button defined with the ResetRole. |
QMessageBox::Help |
0x01000000 |
A "Help" button defined with the HelpRole. |
QMessageBox::SaveAll |
0x00001000 |
A "Save All" button defined with the AcceptRole. |
QMessageBox::Yes |
0x00004000 |
A "Yes" button defined with the YesRole. |
QMessageBox::YesToAll |
0x00008000 |
A "Yes to All" button defined with the YesRole. |
QMessageBox::No |
0x00010000 |
A "No" button defined with the NoRole. |
QMessageBox::NoToAll |
0x00020000 |
A "No to All" button defined with the NoRole. |
QMessageBox::Abort |
0x00040000 |
An "Abort" button defined with the RejectRole. |
QMessageBox::Retry |
0x00080000 |
A "Retry" button defined with the AcceptRole. |
QMessageBox::Ignore |
0x00100000 |
An "Ignore" button defined with the AcceptRole. |
QMessageBox::NoButton |
0x00000000 |
An invalid button. |
The following values are obsolete:
Constant |
Value |
Description |
---|---|---|
QMessageBox::YesAll |
YesToAll |
Use YesToAll instead. |
QMessageBox::NoAll |
NoToAll |
Use NoToAll instead. |
QMessageBox::Default |
0x00000100 |
Use the defaultButton argument of information(), warning(), etc. instead, or call setDefaultButton(). |
QMessageBox::Escape |
0x00000200 |
Call setEscapeButton() instead. |
QMessageBox::FlagMask |
0x00000300 |
|
QMessageBox::ButtonMask |
~FlagMask |
The StandardButtons type is a typedef for QFlags<StandardButton>. It stores an OR combination of StandardButton values.
See Also▲
See also ButtonRole, standardButtons
Property Documentation▲
detailedText : QString▲
This property holds the text to be displayed in the details area.
The text will be interpreted as a plain text.
By default, this property contains an empty string.
Access functions:
-
detailedText() const
-
void setDetailedText(const &text)
See Also▲
icon : Icon▲
This property holds the message box's icon
The icon of the message box can be specified with one of the values:
The default is QMessageBox::NoIcon.
The pixmap used to display the actual icon depends on the current GUI style. You can also set a custom pixmap for the icon by setting the icon pixmap property.
Access functions:
-
icon() const
-
void setIcon(QMessageBox::Icon)
See Also▲
See also iconPixmap
iconPixmap : QPixmap▲
This property holds the current icon
The icon currently used by the message box. Note that it's often hard to draw one pixmap that looks appropriate in all GUI styles; you may want to supply a different pixmap for each platform.
By default, this property is undefined.
Access functions:
-
iconPixmap() const
-
void setIconPixmap(const &pixmap)
See Also▲
See also icon
informativeText : QString▲
This property holds the informative text that provides a fuller description for the message
Infromative text can be used to expand upon the text() to give more information to the user. On the Mac, this text appears in small system font below the text(). On other platforms, it is simply appended to the existing text.
By default, this property contains an empty string.
Access functions:
-
informativeText() const
-
void setInformativeText(const &text)
See Also▲
See also QMessageBox::text, QMessageBox::detailedText
standardButtons : StandardButtons▲
collection of standard buttons in the message box
This property controls which standard buttons are used by the message box.
By default, this property contains no standard buttons.
Access functions:
-
standardButtons() const
-
void setStandardButtons( buttons)
See Also▲
See also addButton()
text : QString▲
This property holds the message box text to be displayed.
The text will be interpreted either as a plain text or as rich text, depending on the text format setting (QMessageBox::textFormat). The default setting is Qt::AutoText, i.e., the message box will try to auto-detect the format of the text.
The default value of this property is an empty string.
Access functions:
-
text() const
-
void setText(const &text)
See Also▲
textFormat : Qt::TextFormat▲
This property holds the format of the text displayed by the message box
The current text format used by the message box. See the Qt::TextFormat enum for an explanation of the possible options.
The default format is Qt::AutoText.
Access functions:
-
textFormat() const
-
void setTextFormat( format)
See Also▲
See also setText()
[since 5.1] textInteractionFlags : Qt::TextInteractionFlags▲
Specifies how the label of the message box should interact with user input.
The default value depends on the style.
This property was introduced in Qt 5.1.
Access functions:
-
textInteractionFlags() const
-
void setTextInteractionFlags( flags)
See Also▲
Member Function Documentation▲
[explicit] QMessageBox::QMessageBox(QWidget *parent = nullptr)▲
Constructs a message box with no text and no buttons. parent is passed to the QDialog constructor.
On macOS, if you want your message box to appear as a Qt::Sheet of its parent, set the message box's window modality to Qt::WindowModal or use open(). Otherwise, the message box will be a standard dialog.
QMessageBox::QMessageBox(QMessageBox::Icon icon, const QString &title, const QString &text, QMessageBox::StandardButtons buttons = NoButton, QWidget *parent = nullptr, Qt::WindowFlags f = Qt::Dialog | Qt::MSWindowsFixedSizeDialogHint)▲
Constructs a message box with the given icon, title, text, and standard buttons. Standard or custom buttons can be added at any time using addButton(). The parent and f arguments are passed to the QDialog constructor.
The message box is an application modal dialog box.
On macOS, if parent is not nullptr and you want your message box to appear as a Qt::Sheet of that parent, set the message box's window modality to Qt::WindowModal (default). Otherwise, the message box will be a standard dialog.
See Also▲
See also setWindowTitle(), setText(), setIcon(), setStandardButtons()
[virtual] QMessageBox::~QMessageBox()▲
Destroys the message box.
[static] void QMessageBox::about(QWidget *parent, const QString &title, const QString &text)▲
Displays a simple about box with title title and text text. The about box's parent is parent.
about() looks for a suitable icon in four locations:
-
It prefers parent->icon() if that exists.
-
If not, it tries the top-level widget containing parent.
-
If that fails, it tries the active window.
-
As a last resort it uses the Information icon.
The about box has a single button labelled "OK". On macOS, the about box is popped up as a modeless window; on other platforms, it is currently application modal.
See Also▲
See also QWidget::windowIcon(), QApplication::activeWindow()
[static] void QMessageBox::aboutQt(QWidget *parent, const QString &title = QString())▲
Displays a simple message box about Qt, with the given title and centered over parent (if parent is not nullptr). The message includes the version number of Qt being used by the application.
This is useful for inclusion in the Help menu of an application, as shown in the Menus example.
QApplication provides this functionality as a slot.
On macOS, the about box is popped up as a modeless window; on other platforms, it is currently application modal.
See Also▲
See also QApplication::aboutQt()
void QMessageBox::addButton(QAbstractButton *button, QMessageBox::ButtonRole role)▲
Adds the given button to the message box with the specified role.
See Also▲
See also removeButton(), button(), setStandardButtons()
QPushButton *QMessageBox::addButton(const QString &text, QMessageBox::ButtonRole role)▲
This is an overloaded function.
Creates a button with the given text, adds it to the message box for the specified role, and returns it.
QPushButton *QMessageBox::addButton(QMessageBox::StandardButton button)▲
This is an overloaded function.
Adds a standard button to the message box if it is valid to do so, and returns the push button.
See Also▲
See also setStandardButtons()
QAbstractButton *QMessageBox::button(QMessageBox::StandardButton which) const▲
See Also▲
See also standardButtons, standardButton()
void QMessageBox::buttonClicked(QAbstractButton *button)▲
QMessageBox::ButtonRole QMessageBox::buttonRole(QAbstractButton *button) const▲
QList<QAbstractButton *> QMessageBox::buttons() const▲
See Also▲
See also buttonRole(), addButton(), removeButton()
[override virtual protected] void QMessageBox::changeEvent(QEvent *ev)▲
Reimplements: QWidget::changeEvent(QEvent *event).
[since 5.2] QCheckBox *QMessageBox::checkBox() const▲
Returns the checkbox shown on the dialog. This is nullptr if no checkbox is set.
This function was introduced in Qt 5.2.
See Also▲
See also setCheckBox()
QAbstractButton *QMessageBox::clickedButton() const▲
Returns the button that was clicked by the user, or nullptr if the user hit the Esc key and no escape button was set.
If exec() hasn't been called yet, returns nullptr.
Example:
QMessageBox messageBox(this
);
QAbstractButton *
disconnectButton =
messageBox.addButton(tr("Disconnect"
), QMessageBox::
ActionRole);
...
messageBox.exec();
if
(messageBox.clickedButton() ==
disconnectButton) {
...
}
See Also▲
See also standardButton(), button()
[override virtual protected] void QMessageBox::closeEvent(QCloseEvent *e)▲
Reimplements: QDialog::closeEvent(QCloseEvent *e).
[static] QMessageBox::StandardButton QMessageBox::critical(QWidget *parent, const QString &title, const QString &text, QMessageBox::StandardButtons buttons = Ok, QMessageBox::StandardButton defaultButton = NoButton)▲
Opens a critical message box with the given title and text in front of the specified parent widget.
The standard buttons are added to the message box. defaultButton specifies the button used when Enter is pressed. defaultButton must refer to a button that was given in buttons. If defaultButton is QMessageBox::NoButton, QMessageBox chooses a suitable default automatically.
Returns the identity of the standard button that was clicked. If Esc was pressed instead, the escape button is returned.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
See also question(), warning(), information()
QPushButton *QMessageBox::defaultButton() const▲
Returns the button that should be the message box's default button. Returns nullptr if no default button was set.
See Also▲
See also setDefaultButton(), addButton(), QPushButton::setDefault()
QAbstractButton *QMessageBox::escapeButton() const▲
Returns the button that is activated when escape is pressed.
By default, QMessageBox attempts to automatically detect an escape button as follows:
-
If there is only one button, it is made the escape button.
-
If there is a Cancel button, it is made the escape button.
-
On macOS only, if there is exactly one button with the role QMessageBox::RejectRole, it is made the escape button.
When an escape button could not be automatically detected, pressing Esc has no effect.
See Also▲
See also setEscapeButton(), addButton()
[override virtual protected] bool QMessageBox::event(QEvent *e)▲
Reimplements: QWidget::event(QEvent *event).
[override virtual] int QMessageBox::exec()▲
Reimplements: QDialog::exec().
Shows the message box as a modal dialog, blocking until the user closes it.
When using a QMessageBox with standard buttons, this function returns a StandardButton value indicating the standard button that was clicked. When using QMessageBox with custom buttons, this function returns an opaque value; use clickedButton() to determine which button was clicked.
The result() function returns also StandardButton value instead of QDialog::DialogCode.
Users cannot interact with any other window in the same application until they close the dialog, either by clicking a button or by using a mechanism provided by the window system.
See Also▲
[static] QMessageBox::StandardButton QMessageBox::information(QWidget *parent, const QString &title, const QString &text, QMessageBox::StandardButtons buttons = Ok, QMessageBox::StandardButton defaultButton = NoButton)▲
Opens an information message box with the given title and text in front of the specified parent widget.
The standard buttons are added to the message box. defaultButton specifies the button used when Enter is pressed. defaultButton must refer to a button that was given in buttons. If defaultButton is QMessageBox::NoButton, QMessageBox chooses a suitable default automatically.
Returns the identity of the standard button that was clicked. If Esc was pressed instead, the escape button is returned.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
[override virtual protected] void QMessageBox::keyPressEvent(QKeyEvent *e)▲
Reimplements: QDialog::keyPressEvent(QKeyEvent *e).
void QMessageBox::open(QObject *receiver, const char *member)▲
Opens the dialog and connects its finished() or buttonClicked() signal to the slot specified by receiver and member. If the slot in member has a pointer for its first parameter the connection is to buttonClicked(), otherwise the connection is to finished().
The signal will be disconnected from the slot when the dialog is closed.
[static] QMessageBox::StandardButton QMessageBox::question(QWidget *parent, const QString &title, const QString &text, QMessageBox::StandardButtons buttons = StandardButtons(Yes | No), QMessageBox::StandardButton defaultButton = NoButton)▲
Opens a question message box with the given title and text in front of the specified parent widget.
The standard buttons are added to the message box. defaultButton specifies the button used when Enter is pressed. defaultButton must refer to a button that was given in buttons. If defaultButton is QMessageBox::NoButton, QMessageBox chooses a suitable default automatically.
Returns the identity of the standard button that was clicked. If Esc was pressed instead, the escape button is returned.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
See also information(), warning(), critical()
void QMessageBox::removeButton(QAbstractButton *button)▲
Removes button from the button box without deleting it.
See Also▲
See also addButton(), setStandardButtons()
[override virtual protected] void QMessageBox::resizeEvent(QResizeEvent *event)▲
Reimplements: QDialog::resizeEvent(QResizeEvent *).
[since 5.2] void QMessageBox::setCheckBox(QCheckBox *cb)▲
Sets the checkbox cb on the message dialog. The message box takes ownership of the checkbox. The argument cb can be nullptr to remove an existing checkbox from the message box.
This function was introduced in Qt 5.2.
See Also▲
See also checkBox()
void QMessageBox::setDefaultButton(QPushButton *button)▲
Sets the message box's default button to button.
See Also▲
See also defaultButton(), addButton(), QPushButton::setDefault()
void QMessageBox::setDefaultButton(QMessageBox::StandardButton button)▲
Sets the message box's default button to button.
See Also▲
See also addButton(), QPushButton::setDefault()
void QMessageBox::setEscapeButton(QAbstractButton *button)▲
Sets the button that gets activated when the Escape key is pressed to button.
See Also▲
See also escapeButton(), addButton(), clickedButton()
void QMessageBox::setEscapeButton(QMessageBox::StandardButton button)▲
Sets the buttons that gets activated when the Escape key is pressed to button.
See Also▲
See also addButton(), clickedButton()
void QMessageBox::setWindowModality(Qt::WindowModality windowModality)▲
This function shadows QWidget::setWindowModality().
Sets the modality of the message box to windowModality.
On macOS, if the modality is set to Qt::WindowModal and the message box has a parent, then the message box will be a Qt::Sheet, otherwise the message box will be a standard dialog.
void QMessageBox::setWindowTitle(const QString &title)▲
This function shadows QWidget::setWindowTitle().
Sets the title of the message box to title. On macOS, the window title is ignored (as required by the macOS Guidelines).
[override virtual protected] void QMessageBox::showEvent(QShowEvent *e)▲
Reimplements: QDialog::showEvent(QShowEvent *event).
QMessageBox::StandardButton QMessageBox::standardButton(QAbstractButton *button) const▲
Returns the standard button enum value corresponding to the given button, or NoButton if the given button isn't a standard button.
See Also▲
See also button(), standardButtons()
[static] QMessageBox::StandardButton QMessageBox::warning(QWidget *parent, const QString &title, const QString &text, QMessageBox::StandardButtons buttons = Ok, QMessageBox::StandardButton defaultButton = NoButton)▲
Opens a warning message box with the given title and text in front of the specified parent widget.
The standard buttons are added to the message box. defaultButton specifies the button used when Enter is pressed. defaultButton must refer to a button that was given in buttons. If defaultButton is QMessageBox::NoButton, QMessageBox chooses a suitable default automatically.
Returns the identity of the standard button that was clicked. If Esc was pressed instead, the escape button is returned.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
See also question(), information(), critical()
Obsolete Members for QMessageBox▲
The following members of class QMessageBox are deprecated. We strongly advise against using them in new code.
Obsolete Member Type Documentation▲
QMessageBox::Button▲
This typedef is deprecated. We strongly advise against using it in new code.
Use QMessageBox::StandardButton instead.
Obsolete Member Function Documentation▲
QMessageBox::QMessageBox(const QString &title, const QString &text, QMessageBox::Icon icon, int button0, int button1, int button2, QWidget *parent = nullptr, Qt::WindowFlags f = Qt::Dialog | Qt::MSWindowsFixedSizeDialogHint)▲
This function is deprecated. We strongly advise against using it in new code.
Constructs a message box with a title, a text, an icon, and up to three buttons.
The icon must be one of the following:
Each button, button0, button1 and button2, can have one of the following values:
Use QMessageBox::NoButton for the later parameters to have fewer than three buttons in your message box. If you don't specify any buttons at all, QMessageBox will provide an Ok button.
One of the buttons can be OR-ed with the QMessageBox::Default flag to make it the default button (clicked when Enter is pressed).
One of the buttons can be OR-ed with the QMessageBox::Escape flag to make it the cancel or close button (clicked when Esc is pressed).
QMessageBox mb("Application Name"
,
"Hardware failure.
\n\n
Disk error detected
\n
Do you want to stop?"
,
QMessageBox::
Question,
QMessageBox::
Yes |
QMessageBox::
Default,
QMessageBox::
No |
QMessageBox::
Escape,
QMessageBox::
NoButton);
if
(mb.exec() ==
QMessageBox::
No) {
// try again
The message box is an application modal dialog box.
The parent and f arguments are passed to the QDialog constructor.
See Also▲
See also setWindowTitle(), setText(), setIcon()
QString QMessageBox::buttonText(int button) const▲
Returns the text of the message box button button, or an empty string if the message box does not contain the button.
Use button() and QPushButton::text() instead.
See Also▲
See also setButtonText()
[static] int QMessageBox::critical(QWidget *parent, const QString &title, const QString &text, int button0, int button1, int button2 = 0)▲
This function is deprecated since 6.2. We strongly advise against using it in new code.
Use the overload taking StandardButtons instead.
Opens a critical message box with the given title and text. The dialog may have up to three buttons. Each of the button parameters, button0, button1 and button2 may be set to one of the following values:
If you don't want all three buttons, set the last button, or last two buttons to QMessageBox::NoButton.
One button can be OR-ed with QMessageBox::Default, and one button can be OR-ed with QMessageBox::Escape.
Returns the identity (QMessageBox::Ok, or QMessageBox::No, etc.) of the button that was clicked.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
See also information(), question(), warning()
[static] int QMessageBox::critical(QWidget *parent, const QString &title, const QString &text, const QString &button0Text, const QString &button1Text = QString(), const QString &button2Text = QString(), int defaultButtonNumber = 0, int escapeButtonNumber = -1)▲
This function is deprecated since 6.2. We strongly advise against using it in new code.
Use the overload taking StandardButtons instead.
This is an overloaded function.
Displays a critical error message box with the given title and text, as well as one, two, or three buttons. Returns the number of the button that was clicked (0, 1 or 2).
button0Text is the text of the first button, and is optional. If button0Text is not supplied, "OK" (translated) will be used. button1Text is the text of the second button, and is optional, and button2Text is the text of the third button, and is optional. defaultButtonNumber (0, 1 or 2) is the index of the default button; pressing Return or Enter is the same as clicking the default button. It defaults to 0 (the first button). escapeButtonNumber is the index of the Escape button; pressing Escape is the same as clicking this button. It defaults to -1; supply 0, 1, or 2 to make pressing Escape equivalent to clicking the relevant button.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
See also information(), question(), warning()
[static] int QMessageBox::information(QWidget *parent, const QString &title, const QString &text, int button0, int button1 = 0, int button2 = 0)▲
This function is deprecated since 6.2. We strongly advise against using it in new code.
Use the overload taking StandardButtons instead.
Opens an information message box with the given title and the text. The dialog may have up to three buttons. Each of the buttons, button0, button1 and button2 may be set to one of the following values:
If you don't want all three buttons, set the last button, or last two buttons to QMessageBox::NoButton.
One button can be OR-ed with QMessageBox::Default, and one button can be OR-ed with QMessageBox::Escape.
Returns the identity (QMessageBox::Ok, or QMessageBox::No, etc.) of the button that was clicked.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
[static] int QMessageBox::information(QWidget *parent, const QString &title, const QString &text, const QString &button0Text, const QString &button1Text = QString(), const QString &button2Text = QString(), int defaultButtonNumber = 0, int escapeButtonNumber = -1)▲
This function is deprecated. We strongly advise against using it in new code.
since 6.2. Use the overload taking StandardButtons instead.
This is an overloaded function.
Displays an information message box with the given title and text, as well as one, two or three buttons. Returns the index of the button that was clicked (0, 1 or 2).
button0Text is the text of the first button, and is optional. If button0Text is not supplied, "OK" (translated) will be used. button1Text is the text of the second button, and is optional. button2Text is the text of the third button, and is optional. defaultButtonNumber (0, 1 or 2) is the index of the default button; pressing Return or Enter is the same as clicking the default button. It defaults to 0 (the first button). escapeButtonNumber is the index of the escape button; pressing Esc is the same as clicking this button. It defaults to -1; supply 0, 1 or 2 to make pressing Esc equivalent to clicking the relevant button.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
[static] int QMessageBox::question(QWidget *parent, const QString &title, const QString &text, int button0, int button1 = 0, int button2 = 0)▲
This function is deprecated since 6.2. We strongly advise against using it in new code.
Use the overload taking StandardButtons instead.
Opens a question message box with the given title and text. The dialog may have up to three buttons. Each of the buttons, button0, button1 and button2 may be set to one of the following values:
If you don't want all three buttons, set the last button, or last two buttons to QMessageBox::NoButton.
One button can be OR-ed with QMessageBox::Default, and one button can be OR-ed with QMessageBox::Escape.
Returns the identity (QMessageBox::Yes, or QMessageBox::No, etc.) of the button that was clicked.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
See also information(), warning(), critical()
[static] int QMessageBox::question(QWidget *parent, const QString &title, const QString &text, const QString &button0Text, const QString &button1Text = QString(), const QString &button2Text = QString(), int defaultButtonNumber = 0, int escapeButtonNumber = -1)▲
This function is deprecated since 6.2. We strongly advise against using it in new code.
Use the overload taking StandardButtons instead.
This is an overloaded function.
Displays a question message box with the given title and text, as well as one, two or three buttons. Returns the index of the button that was clicked (0, 1 or 2).
button0Text is the text of the first button, and is optional. If button0Text is not supplied, "OK" (translated) will be used. button1Text is the text of the second button, and is optional. button2Text is the text of the third button, and is optional. defaultButtonNumber (0, 1 or 2) is the index of the default button; pressing Return or Enter is the same as clicking the default button. It defaults to 0 (the first button). escapeButtonNumber is the index of the Escape button; pressing Escape is the same as clicking this button. It defaults to -1; supply 0, 1 or 2 to make pressing Escape equivalent to clicking the relevant button.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
See also information(), warning(), critical()
void QMessageBox::setButtonText(int button, const QString &text)▲
This function is deprecated. We strongly advise against using it in new code.
Sets the text of the message box button button to text. Setting the text of a button that is not in the message box is silently ignored.
Use addButton() instead.
See Also▲
See also buttonText()
[static] QPixmap QMessageBox::standardIcon(QMessageBox::Icon icon)▲
This function is deprecated. We strongly advise against using it in new code.
Returns the pixmap used for a standard icon. This allows the pixmaps to be used in more complex message boxes. icon specifies the required icon, e.g. QMessageBox::Question, QMessageBox::Information, QMessageBox::Warning or QMessageBox::Critical.
Call QStyle::standardIcon() with QStyle::SP_MessageBoxInformation etc. instead.
[static] int QMessageBox::warning(QWidget *parent, const QString &title, const QString &text, int button0, int button1, int button2 = 0)▲
This function is deprecated since 6.2. We strongly advise against using it in new code.
Use the overload taking StandardButtons instead.
Opens a warning message box with the given title and text. The dialog may have up to three buttons. Each of the button parameters, button0, button1 and button2 may be set to one of the following values:
If you don't want all three buttons, set the last button, or last two buttons to QMessageBox::NoButton.
One button can be OR-ed with QMessageBox::Default, and one button can be OR-ed with QMessageBox::Escape.
Returns the identity (QMessageBox::Ok or QMessageBox::No or ...) of the button that was clicked.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
See also information(), question(), critical()
[static] int QMessageBox::warning(QWidget *parent, const QString &title, const QString &text, const QString &button0Text, const QString &button1Text = QString(), const QString &button2Text = QString(), int defaultButtonNumber = 0, int escapeButtonNumber = -1)▲
This function is deprecated since 6.2. We strongly advise against using it in new code.
Use the overload taking StandardButtons instead.
This is an overloaded function.
Displays a warning message box with the given title and text, as well as one, two, or three buttons. Returns the number of the button that was clicked (0, 1, or 2).
button0Text is the text of the first button, and is optional. If button0Text is not supplied, "OK" (translated) will be used. button1Text is the text of the second button, and is optional, and button2Text is the text of the third button, and is optional. defaultButtonNumber (0, 1 or 2) is the index of the default button; pressing Return or Enter is the same as clicking the default button. It defaults to 0 (the first button). escapeButtonNumber is the index of the Escape button; pressing Escape is the same as clicking this button. It defaults to -1; supply 0, 1, or 2 to make pressing Escape equivalent to clicking the relevant button.
The message box is an application modal dialog box.
Do not delete parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QMessageBox constructors.
See Also▲
See also information(), question(), critical()