QPageLayout Class▲
-
Header: QPageLayout
-
Since: Qt 5.3
-
CMake:
find_package(Qt6 REQUIRED COMPONENTS Gui)
target_link_libraries(mytarget PRIVATE Qt6::Gui)
-
qmake: QT += gui
Detailed Description▲
The QPageLayout class defines the layout of a page in a paged document, with the page size, orientation and margins able to be set and the full page and paintable page rectangles defined by those attributes able to be queried in a variety of units.
The page size is defined by the QPageSize class which can be queried for page size attributes. Note that the QPageSize itself is always defined in a Portrait orientation.
The minimum margins can be defined for the layout but normally default to 0. When used in conjunction with Qt's printing support the minimum margins will reflect the minimum printable area defined by the printer.
In the default StandardMode the current margins and minimum margins are always taken into account. The paintable rectangle is the full page rectangle less the current margins, and the current margins can only be set to values between the minimum margins and the maximum margins allowed by the full page size.
In FullPageMode the current margins and minimum margins are not taken into account. The paintable rectangle is the full page rectangle, and the current margins can be set to any values regardless of the minimum margins and page size.
See Also▲
See also QPageSize
Member Type Documentation▲
enum QPageLayout::Mode▲
Defines the page layout mode
|
Constant |
Value |
Description |
|---|---|---|
|
QPageLayout::StandardMode |
0 |
Paint Rect includes margins, margins must fall between the minimum and maximum. |
|
QPageLayout::FullPageMode |
1 |
Paint Rect excludes margins, margins can be any value and must be managed manually. |
enum QPageLayout::Orientation▲
This enum type defines the page orientation
|
Constant |
Value |
Description |
|---|---|---|
|
QPageLayout::Portrait |
0 |
The page size is used in its default orientation |
|
QPageLayout::Landscape |
1 |
The page size is rotated through 90 degrees |
Note that some standard page sizes are defined with a width larger than their height, hence the orientation is defined relative to the standard page size and not using the relative page dimensions.
enum QPageLayout::Unit▲
This enum type is used to specify the measurement unit for page layout and margins.
|
Constant |
Value |
|
|---|---|---|
|
QPageLayout::Millimeter |
0 |
|
|
QPageLayout::Point |
1 |
1/72th of an inch |
|
QPageLayout::Inch |
2 |
|
|
QPageLayout::Pica |
3 |
1/72th of a foot, 1/6th of an inch, 12 Points |
|
QPageLayout::Didot |
4 |
1/72th of a French inch, 0.375 mm |
|
QPageLayout::Cicero |
5 |
1/6th of a French inch, 12 Didot, 4.5mm |
Member Function Documentation▲
QPageLayout::QPageLayout()▲
Creates an invalid QPageLayout.
QPageLayout::QPageLayout(const QPageSize &pageSize, QPageLayout::Orientation orientation, const QMarginsF &margins, QPageLayout::Unit units = Point, const QMarginsF &minMargins = QMarginsF(0, 0, 0, 0))▲
Creates a QPageLayout with the given pageSize, orientation and margins in the given units.
Optionally define the minimum allowed margins minMargins, e.g. the minimum margins able to be printed by a physical print device.
The constructed QPageLayout will be in StandardMode.
The margins given will be clamped to the minimum margins and the maximum margins allowed by the page size.
QPageLayout::QPageLayout(const QPageLayout &other)▲
Copy constructor, copies other to this.
QPageLayout::~QPageLayout()▲
Destroys the page layout.
QRectF QPageLayout::fullRect() const▲
Returns the full page rectangle in the current layout units.
The page rectangle takes into account the page size and page orientation, but not the page margins.
See Also▲
QRectF QPageLayout::fullRect(QPageLayout::Unit units) const▲
Returns the full page rectangle in the required units.
The page rectangle takes into account the page size and page orientation, but not the page margins.
See Also▲
See also paintRect()
QRect QPageLayout::fullRectPixels(int resolution) const▲
Returns the full page rectangle in device pixels for the given resolution.
The page rectangle takes into account the page size and page orientation, but not the page margins.
See Also▲
See also paintRect()
QRect QPageLayout::fullRectPoints() const▲
Returns the full page rectangle in Postscript Points (1/72 of an inch).
The page rectangle takes into account the page size and page orientation, but not the page margins.
See Also▲
See also paintRect()
bool QPageLayout::isEquivalentTo(const QPageLayout &other) const▲
Returns true if this page layout is equivalent to the other page layout, i.e. if the page has the same size, margins and orientation.
bool QPageLayout::isValid() const▲
Returns true if this page layout is valid.
QMarginsF QPageLayout::margins() const▲
Returns the margins of the page layout using the currently set units.
See Also▲
See also setMargins(), units()
QMarginsF QPageLayout::margins(QPageLayout::Unit units) const▲
Returns the margins of the page layout using the requested units.
See Also▲
See also setMargins(), margins()
QMargins QPageLayout::marginsPixels(int resolution) const▲
Returns the margins of the page layout in device pixels for the given resolution.
See Also▲
See also setMargins()
QMargins QPageLayout::marginsPoints() const▲
Returns the margins of the page layout in Postscript Points (1/72 of an inch).
See Also▲
See also setMargins(), margins()
QMarginsF QPageLayout::maximumMargins() const▲
Returns the maximum margins that would be applied if the page layout was in StandardMode.
The maximum margins allowed are calculated as the full size of the page minus the minimum margins set. For example, if the page width is 100 points and the minimum right margin is 10 points, then the maximum left margin will be 90 points.
See Also▲
See also setMinimumMargins(), minimumMargins()
QMarginsF QPageLayout::minimumMargins() const▲
Returns the minimum margins of the page layout.
See Also▲
See also setMinimumMargins(), maximumMargins()
QPageLayout::Mode QPageLayout::mode() const▲
QPageLayout::Orientation QPageLayout::orientation() const▲
QPageSize QPageLayout::pageSize() const▲
Returns the page size of the page layout.
Note that the QPageSize is always defined in a Portrait orientation. To obtain a size that takes the set orientation into account you must use fullRect().
See Also▲
See also setPageSize()
QRectF QPageLayout::paintRect() const▲
Returns the page rectangle in the current layout units.
The paintable rectangle takes into account the page size, orientation and margins.
If the FullPageMode mode is set then the fullRect() is returned and the margins must be manually managed.
QRectF QPageLayout::paintRect(QPageLayout::Unit units) const▲
Returns the page rectangle in the required units.
The paintable rectangle takes into account the page size, orientation and margins.
If the FullPageMode mode is set then the fullRect() is returned and the margins must be manually managed.
QRect QPageLayout::paintRectPixels(int resolution) const▲
Returns the paintable rectangle in rounded device pixels for the given resolution.
The paintable rectangle takes into account the page size, orientation and margins.
If the FullPageMode mode is set then the fullRect() is returned and the margins must be manually managed.
QRect QPageLayout::paintRectPoints() const▲
Returns the paintable rectangle in rounded Postscript Points (1/72 of an inch).
The paintable rectangle takes into account the page size, orientation and margins.
If the FullPageMode mode is set then the fullRect() is returned and the margins must be manually managed.
bool QPageLayout::setBottomMargin(qreal bottomMargin)▲
Sets the bottom page margin of the page layout to bottomMargin. Returns true if the margin was successfully set.
The units used are those currently defined for the layout. To use different units call setUnits() first.
If in the default StandardMode then the new margin must fall between the minimum margin set and the maximum margin allowed by the page size, otherwise the margin will not be set.
If in FullPageMode then any margin values will be accepted.
See Also▲
See also setMargins(), margins()
bool QPageLayout::setLeftMargin(qreal leftMargin)▲
Sets the left page margin of the page layout to leftMargin. Returns true if the margin was successfully set.
The units used are those currently defined for the layout. To use different units call setUnits() first.
If in the default StandardMode then the new margin must fall between the minimum margin set and the maximum margin allowed by the page size, otherwise the margin will not be set.
If in FullPageMode then any margin values will be accepted.
See Also▲
See also setMargins(), margins()
bool QPageLayout::setMargins(const QMarginsF &margins)▲
Sets the page margins of the page layout to margins Returns true if the margins were successfully set.
The units used are those currently defined for the layout. To use different units then call setUnits() first.
If in the default StandardMode then all the new margins must fall between the minimum margins set and the maximum margins allowed by the page size, otherwise the margins will not be set.
If in FullPageMode then any margin values will be accepted.
See Also▲
void QPageLayout::setMinimumMargins(const QMarginsF &minMargins)▲
Sets the minimum page margins of the page layout to minMargins.
It is not recommended to override the default values set for a page size as this may be the minimum printable area for a physical print device.
If the StandardMode mode is set then the existing margins will be clamped to the new minMargins and the maximum allowed by the page size. If the FullPageMode is set then the existing margins will be unchanged.
See Also▲
See also minimumMargins(), setMargins()
void QPageLayout::setMode(QPageLayout::Mode mode)▲
void QPageLayout::setOrientation(QPageLayout::Orientation orientation)▲
Sets the page orientation of the page layout to orientation.
Changing the orientation does not affect the current margins or the minimum margins.
See Also▲
See also orientation()
void QPageLayout::setPageSize(const QPageSize &pageSize, const QMarginsF &minMargins = QMarginsF(0, 0, 0, 0))▲
Sets the page size of the page layout to pageSize.
Optionally define the minimum allowed margins minMargins, e.g. the minimum margins able to be printed by a physical print device, otherwise the minimum margins will default to 0.
If StandardMode is set then the existing margins will be clamped to the new minimum margins and the maximum margins allowed by the page size. If FullPageMode is set then the existing margins will be unchanged.
See Also▲
See also pageSize()
bool QPageLayout::setRightMargin(qreal rightMargin)▲
Sets the right page margin of the page layout to rightMargin. Returns true if the margin was successfully set.
The units used are those currently defined for the layout. To use different units call setUnits() first.
If in the default StandardMode then the new margin must fall between the minimum margin set and the maximum margin allowed by the page size, otherwise the margin will not be set.
If in FullPageMode then any margin values will be accepted.
See Also▲
See also setMargins(), margins()
bool QPageLayout::setTopMargin(qreal topMargin)▲
Sets the top page margin of the page layout to topMargin. Returns true if the margin was successfully set.
The units used are those currently defined for the layout. To use different units call setUnits() first.
If in the default StandardMode then the new margin must fall between the minimum margin set and the maximum margin allowed by the page size, otherwise the margin will not be set.
If in FullPageMode then any margin values will be accepted.
See Also▲
See also setMargins(), margins()
void QPageLayout::setUnits(QPageLayout::Unit units)▲
void QPageLayout::swap(QPageLayout &other)▲
Swaps this page layout with other. This function is very fast and never fails.
QPageLayout::Unit QPageLayout::units() const▲
QPageLayout &QPageLayout::operator=(QPageLayout &&other)▲
Move-assigns other to this QPageLayout instance, transferring the ownership of the managed pointer to this instance.
QPageLayout &QPageLayout::operator=(const QPageLayout &other)▲
Assignment operator, assigns other to this.
Related Non-Members▲
bool operator!=(const QPageLayout &lhs, const QPageLayout &rhs)▲
Returns true if page layout lhs is not equal to page layout rhs, i.e. if any of the attributes differ.
Note that this is a strict equality, especially for page size where the QPageSize ID, name and size must exactly match, and the margins where the units must match.
See Also▲
See also QPageLayout::isEquivalentTo()
bool operator==(const QPageLayout &lhs, const QPageLayout &rhs)▲
Returns true if page layout lhs is equal to page layout rhs, i.e. if all the attributes are exactly equal.
Note that this is a strict equality, especially for page size where the QPageSize ID, name and size must exactly match, and the margins where the units must match.
See Also▲
See also QPageLayout::isEquivalentTo()