QRect Class▲
-
Header: QRect
-
CMake:
find_package(Qt6 REQUIRED COMPONENTS Core)
target_link_libraries(mytarget PRIVATE Qt6::Core)
-
qmake: QT += core
-
Group: QRect is part of painting
Detailed Description▲
A rectangle is normally expressed as a top-left corner and a size. The size (width and height) of a QRect is always equivalent to the mathematical rectangle that forms the basis for its rendering.
A QRect can be constructed with a set of left, top, width and height integers, or from a QPoint and a QSize. The following code creates two identical rectangles.
QRect r1(100, 200, 11, 16);
QRect r2(QPoint(100, 200), QSize(11, 16));There is a third constructor that creates a QRect using the top-left and bottom-right coordinates, but we recommend that you avoid using it. The rationale is that for historical reasons the values returned by the bottom() and right() functions deviate from the true bottom-right corner of the rectangle.
The QRect class provides a collection of functions that return the various rectangle coordinates, and enable manipulation of these. QRect also provides functions to move the rectangle relative to the various coordinates. In addition there is a moveTo() function that moves the rectangle, leaving its top left corner at the given coordinates. Alternatively, the translate() function moves the rectangle the given offset relative to the current position, and the translated() function returns a translated copy of this rectangle.
The size() function returns the rectangle's dimensions as a QSize. The dimensions can also be retrieved separately using the width() and height() functions. To manipulate the dimensions use the setSize(), setWidth() or setHeight() functions. Alternatively, the size can be changed by applying either of the functions setting the rectangle coordinates, for example, setBottom() or setRight().
The contains() function tells whether a given point is inside the rectangle or not, and the intersects() function returns true if this rectangle intersects with a given rectangle. The QRect class also provides the intersected() function which returns the intersection rectangle, and the united() function which returns the rectangle that encloses the given rectangle and this:
|
|
|
|
united() |
The isEmpty() function returns true if left() > right() or top() > bottom(). Note that an empty rectangle is not valid: The isValid() function returns true if left() <= right() and top() <= bottom(). A null rectangle (isNull() == true) on the other hand, has both width and height set to 0.
Note that due to the way QRect and QRectF are defined, an empty QRect is defined in essentially the same way as QRectF.
Finally, QRect objects can be streamed as well as compared.
Rendering▲
When using an anti-aliased painter, the boundary line of a QRect will be rendered symmetrically on both sides of the mathematical rectangle's boundary line. But when using an aliased painter (the default) other rules apply.
Then, when rendering with a one pixel wide pen the QRect's boundary line will be rendered to the right and below the mathematical rectangle's boundary line.
When rendering with a two pixels wide pen the boundary line will be split in the middle by the mathematical rectangle. This will be the case whenever the pen is set to an even number of pixels, while rendering with a pen with an odd number of pixels, the spare pixel will be rendered to the right and below the mathematical rectangle as in the one pixel case.
|
|
|
|
Logical representation |
One pixel wide pen |
|
|
|
|
Two pixel wide pen |
Three pixel wide pen |
Coordinates▲
The QRect class provides a collection of functions that return the various rectangle coordinates, and enable manipulation of these. QRect also provides functions to move the rectangle relative to the various coordinates.
For example the left(), setLeft() and moveLeft() functions as an example: left() returns the x-coordinate of the rectangle's left edge, setLeft() sets the left edge of the rectangle to the given x coordinate (it may change the width, but will never change the rectangle's right edge) and moveLeft() moves the entire rectangle horizontally, leaving the rectangle's left edge at the given x coordinate and its size unchanged.
Note that for historical reasons the values returned by the bottom() and right() functions deviate from the true bottom-right corner of the rectangle: The right() function returns left() + width() - 1 and the bottom() function returns top() + height() - 1. The same is the case for the point returned by the bottomRight() convenience function. In addition, the x and y coordinate of the topRight() and bottomLeft() functions, respectively, contain the same deviation from the true right and bottom edges.
We recommend that you use x() + width() and y() + height() to find the true bottom-right corner, and avoid right() and bottom(). Another solution is to use QRectF: The QRectF class defines a rectangle in the plane using floating point accuracy for coordinates, and the QRectF::right() and QRectF::bottom() functions do return the right and bottom coordinates.
It is also possible to add offsets to this rectangle's coordinates using the adjust() function, as well as retrieve a new rectangle based on adjustments of the original one using the adjusted() function. If either of the width and height is negative, use the normalized() function to retrieve a rectangle where the corners are swapped.
In addition, QRect provides the getCoords() function which extracts the position of the rectangle's top-left and bottom-right corner, and the getRect() function which extracts the rectangle's top-left corner, width and height. Use the setCoords() and setRect() function to manipulate the rectangle's coordinates and dimensions in one go.
Constraints▲
QRect is limited to the minimum and maximum values for the int type. Operations on a QRect that could potentially result in values outside this range will result in undefined behavior.
See Also▲
Member Function Documentation▲
[constexpr] QRect::QRect()▲
[constexpr] QRect::QRect(const QPoint &topLeft, const QPoint &bottomRight)▲
Constructs a rectangle with the given topLeft and bottomRight corners, both included.
If bottomRight is to higher and to the left of topLeft, the rectangle defined is instead non-inclusive of the corners.
To ensure both points are included regardless of relative order, use span().
See Also▲
See also setTopLeft(), setBottomRight(), span()
[constexpr] QRect::QRect(const QPoint &topLeft, const QSize &size)▲
Constructs a rectangle with the given topLeft corner and the given size.
See Also▲
See also setTopLeft(), setSize()
[constexpr] QRect::QRect(int x, int y, int width, int height)▲
Constructs a rectangle with (x, y) as its top-left corner and the given width and height.
See Also▲
See also setRect()
[constexpr] void QRect::adjust(int dx1, int dy1, int dx2, int dy2)▲
Adds dx1, dy1, dx2 and dy2 respectively to the existing coordinates of the rectangle.
See Also▲
[constexpr] QRect QRect::adjusted(int dx1, int dy1, int dx2, int dy2) const▲
Returns a new rectangle with dx1, dy1, dx2 and dy2 added respectively to the existing coordinates of this rectangle.
See Also▲
See also adjust()
[constexpr] int QRect::bottom() const▲
Returns the y-coordinate of the rectangle's bottom edge.
Note that for historical reasons this function returns top() + height() - 1; use y() + height() to retrieve the true y-coordinate.
See Also▲
See also setBottom(), bottomLeft(), bottomRight()
[constexpr] QPoint QRect::bottomLeft() const▲
Returns the position of the rectangle's bottom-left corner. Note that for historical reasons this function returns QPoint(left(), top() + height() - 1).
See Also▲
See also setBottomLeft(), bottom(), left()
[constexpr] QPoint QRect::bottomRight() const▲
Returns the position of the rectangle's bottom-right corner.
Note that for historical reasons this function returns QPoint(left() + width() -1, top() + height() - 1).
See Also▲
See also setBottomRight(), bottom(), right()
[constexpr] QPoint QRect::center() const▲
bool QRect::contains(const QPoint &point, bool proper = false) const▲
Returns true if the given point is inside or on the edge of the rectangle, otherwise returns false. If proper is true, this function only returns true if the given point is inside the rectangle (i.e., not on the edge).
See Also▲
See also intersects()
bool QRect::contains(const QRect &rectangle, bool proper = false) const▲
This is an overloaded function.
Returns true if the given rectangle is inside this rectangle. otherwise returns false. If proper is true, this function only returns true if the rectangle is entirely inside this rectangle (not on the edge).
bool QRect::contains(int x, int y) const▲
This is an overloaded function.
Returns true if the point (x, y) is inside this rectangle, otherwise returns false.
bool QRect::contains(int x, int y, bool proper) const▲
This is an overloaded function.
Returns true if the point (x, y) is inside or on the edge of the rectangle, otherwise returns false. If proper is true, this function only returns true if the point is entirely inside the rectangle(not on the edge).
[constexpr] void QRect::getCoords(int *x1, int *y1, int *x2, int *y2) const▲
Extracts the position of the rectangle's top-left corner to *x1 and *y1, and the position of the bottom-right corner to *x2 and *y2.
See Also▲
[constexpr] void QRect::getRect(int *x, int *y, int *width, int *height) const▲
Extracts the position of the rectangle's top-left corner to *x and *y, and its dimensions to *width and *height.
See Also▲
[constexpr] int QRect::height() const▲
QRect QRect::intersected(const QRect &rectangle) const▲
Returns the intersection of this rectangle and the given rectangle. Note that r.intersected(s) is equivalent to r & s.
See Also▲
See also intersects(), united(), operator&=()
bool QRect::intersects(const QRect &rectangle) const▲
Returns true if this rectangle intersects with the given rectangle (i.e., there is at least one pixel that is within both rectangles), otherwise returns false.
The intersection rectangle can be retrieved using the intersected() function.
See Also▲
See also contains()
[constexpr] bool QRect::isEmpty() const▲
Returns true if the rectangle is empty, otherwise returns false.
An empty rectangle has a left() > right() or top() > bottom(). An empty rectangle is not valid (i.e., isEmpty() == !isValid()).
Use the normalized() function to retrieve a rectangle where the corners are swapped.
See Also▲
See also isNull(), isValid(), normalized()
[constexpr] bool QRect::isNull() const▲
Returns true if the rectangle is a null rectangle, otherwise returns false.
A null rectangle has both the width and the height set to 0 (i.e., right() == left() - 1 and bottom() == top() - 1). A null rectangle is also empty, and hence is not valid.
See Also▲
[constexpr] bool QRect::isValid() const▲
Returns true if the rectangle is valid, otherwise returns false.
A valid rectangle has a left() <= right() and top() <= bottom(). Note that non-trivial operations like intersections are not defined for invalid rectangles. A valid rectangle is not empty (i.e., isValid() == !isEmpty()).
See Also▲
See also isNull(), isEmpty(), normalized()
[constexpr] int QRect::left() const▲
Returns the x-coordinate of the rectangle's left edge. Equivalent to x().
See Also▲
See also setLeft(), topLeft(), bottomLeft()
[constexpr, since 5.1] QRect QRect::marginsAdded(const QMargins &margins) const▲
Returns a rectangle grown by the margins.
This function was introduced in Qt 5.1.
See Also▲
See also operator+=(), marginsRemoved(), operator-=()
[constexpr, since 5.1] QRect QRect::marginsRemoved(const QMargins &margins) const▲
Removes the margins from the rectangle, shrinking it.
This function was introduced in Qt 5.1.
See Also▲
See also marginsAdded(), operator+=(), operator-=()
[constexpr] void QRect::moveBottom(int y)▲
Moves the rectangle vertically, leaving the rectangle's bottom edge at the given y coordinate. The rectangle's size is unchanged.
See Also▲
[constexpr] void QRect::moveBottomLeft(const QPoint &position)▲
Moves the rectangle, leaving the bottom-left corner at the given position. The rectangle's size is unchanged.
See Also▲
See also setBottomLeft(), moveBottom(), moveLeft()
[constexpr] void QRect::moveBottomRight(const QPoint &position)▲
Moves the rectangle, leaving the bottom-right corner at the given position. The rectangle's size is unchanged.
See Also▲
See also setBottomRight(), moveRight(), moveBottom()
[constexpr] void QRect::moveCenter(const QPoint &position)▲
Moves the rectangle, leaving the center point at the given position. The rectangle's size is unchanged.
See Also▲
See also center()
[constexpr] void QRect::moveLeft(int x)▲
Moves the rectangle horizontally, leaving the rectangle's left edge at the given x coordinate. The rectangle's size is unchanged.
See Also▲
[constexpr] void QRect::moveRight(int x)▲
Moves the rectangle horizontally, leaving the rectangle's right edge at the given x coordinate. The rectangle's size is unchanged.
See Also▲
[constexpr] void QRect::moveTo(int x, int y)▲
Moves the rectangle, leaving the top-left corner at the given position (x, y). The rectangle's size is unchanged.
See Also▲
See also translate(), moveTopLeft()
[constexpr] void QRect::moveTo(const QPoint &position)▲
Moves the rectangle, leaving the top-left corner at the given position.
[constexpr] void QRect::moveTop(int y)▲
Moves the rectangle vertically, leaving the rectangle's top edge at the given y coordinate. The rectangle's size is unchanged.
See Also▲
See also top(), setTop(), moveBottom()
[constexpr] void QRect::moveTopLeft(const QPoint &position)▲
Moves the rectangle, leaving the top-left corner at the given position. The rectangle's size is unchanged.
See Also▲
See also setTopLeft(), moveTop(), moveLeft()
[constexpr] void QRect::moveTopRight(const QPoint &position)▲
Moves the rectangle, leaving the top-right corner at the given position. The rectangle's size is unchanged.
See Also▲
See also setTopRight(), moveTop(), moveRight()
QRect QRect::normalized() const▲
Returns a normalized rectangle; i.e., a rectangle that has a non-negative width and height.
If width() < 0 the function swaps the left and right corners, and it swaps the top and bottom corners if height() < 0. The corners are at the same time changed from being non-inclusive to inclusive.
See Also▲
[constexpr] int QRect::right() const▲
Returns the x-coordinate of the rectangle's right edge.
Note that for historical reasons this function returns left() + width() - 1; use x() + width() to retrieve the true x-coordinate.
See Also▲
See also setRight(), topRight(), bottomRight()
[constexpr] void QRect::setBottom(int y)▲
Sets the bottom edge of the rectangle to the given y coordinate. May change the height, but will never change the top edge of the rectangle.
See Also▲
See also bottom(), moveBottom()
[constexpr] void QRect::setBottomLeft(const QPoint &position)▲
Set the bottom-left corner of the rectangle to the given position. May change the size, but will never change the top-right corner of the rectangle.
See Also▲
See also bottomLeft(), moveBottomLeft()
[constexpr] void QRect::setBottomRight(const QPoint &position)▲
Set the bottom-right corner of the rectangle to the given position. May change the size, but will never change the top-left corner of the rectangle.
See Also▲
See also bottomRight(), moveBottomRight()
[constexpr] void QRect::setCoords(int x1, int y1, int x2, int y2)▲
Sets the coordinates of the rectangle's top-left corner to (x1, y1), and the coordinates of its bottom-right corner to (x2, y2).
See Also▲
[constexpr] void QRect::setHeight(int height)▲
Sets the height of the rectangle to the given height. The bottom edge is changed, but not the top one.
See Also▲
[constexpr] void QRect::setLeft(int x)▲
Sets the left edge of the rectangle to the given x coordinate. May change the width, but will never change the right edge of the rectangle.
Equivalent to setX().
See Also▲
[constexpr] void QRect::setRect(int x, int y, int width, int height)▲
Sets the coordinates of the rectangle's top-left corner to (x, y), and its size to the given width and height.
See Also▲
[constexpr] void QRect::setRight(int x)▲
Sets the right edge of the rectangle to the given x coordinate. May change the width, but will never change the left edge of the rectangle.
See Also▲
[constexpr] void QRect::setSize(const QSize &size)▲
Sets the size of the rectangle to the given size. The top-left corner is not moved.
See Also▲
[constexpr] void QRect::setTop(int y)▲
Sets the top edge of the rectangle to the given y coordinate. May change the height, but will never change the bottom edge of the rectangle.
Equivalent to setY().
See Also▲
[constexpr] void QRect::setTopLeft(const QPoint &position)▲
Set the top-left corner of the rectangle to the given position. May change the size, but will never change the bottom-right corner of the rectangle.
See Also▲
See also topLeft(), moveTopLeft()
[constexpr] void QRect::setTopRight(const QPoint &position)▲
Set the top-right corner of the rectangle to the given position. May change the size, but will never change the bottom-left corner of the rectangle.
See Also▲
See also topRight(), moveTopRight()
[constexpr] void QRect::setWidth(int width)▲
Sets the width of the rectangle to the given width. The right edge is changed, but not the left one.
See Also▲
[constexpr] void QRect::setX(int x)▲
Sets the left edge of the rectangle to the given x coordinate. May change the width, but will never change the right edge of the rectangle.
Equivalent to setLeft().
See Also▲
See also x(), setY(), setTopLeft()
[constexpr] void QRect::setY(int y)▲
Sets the top edge of the rectangle to the given y coordinate. May change the height, but will never change the bottom edge of the rectangle.
Equivalent to setTop().
See Also▲
See also y(), setX(), setTopLeft()
[constexpr] QSize QRect::size() const▲
[static constexpr, since 6.0] QRect QRect::span(const QPoint &p1, const QPoint &p2)▲
Returns a rectangle spanning the two points p1 and p2, including both and everything in between.
This function was introduced in Qt 6.0.
[since 5.8] CGRect QRect::toCGRect() const▲
Creates a CGRect from a QRect.
This function was introduced in Qt 5.8.
See Also▲
See also QRectF::fromCGRect()
[constexpr, since 6.4] QRectF QRect::toRectF() const▲
Returns this rectangle as a rectangle with floating point accuracy.
This function, like the QRectF(QRect) constructor, preserves the size() of the rectangle, not its bottomRight() corner.
This function was introduced in Qt 6.4.
See Also▲
See also QRectF::toRect()
[constexpr] int QRect::top() const▲
[constexpr] QPoint QRect::topLeft() const▲
Returns the position of the rectangle's top-left corner.
See Also▲
See also setTopLeft(), top(), left()
[constexpr] QPoint QRect::topRight() const▲
Returns the position of the rectangle's top-right corner.
Note that for historical reasons this function returns QPoint(left() + width() -1, top()).
See Also▲
See also setTopRight(), top(), right()
[constexpr] void QRect::translate(int dx, int dy)▲
Moves the rectangle dx along the x axis and dy along the y axis, relative to the current position. Positive values move the rectangle to the right and down.
See Also▲
See also moveTopLeft(), moveTo(), translated()
[constexpr] void QRect::translate(const QPoint &offset)▲
This is an overloaded function.
Moves the rectangle offset.x() along the x axis and offset.y() along the y axis, relative to the current position.
[constexpr] QRect QRect::translated(int dx, int dy) const▲
Returns a copy of the rectangle that is translated dx along the x axis and dy along the y axis, relative to the current position. Positive values move the rectangle to the right and down.
See Also▲
See also translate()
[constexpr] QRect QRect::translated(const QPoint &offset) const▲
This is an overloaded function.
Returns a copy of the rectangle that is translated offset.x() along the x axis and offset.y() along the y axis, relative to the current position.
[constexpr, since 5.7] QRect QRect::transposed() const▲
Returns a copy of the rectangle that has its width and height exchanged:
QRect r = {15, 51, 42, 24};
r = r.transposed(); // r == {15, 51, 24, 42}This function was introduced in Qt 5.7.
See Also▲
See also QSize::transposed()
QRect QRect::united(const QRect &rectangle) const▲
Returns the bounding rectangle of this rectangle and the given rectangle.
See Also▲
See also intersected()
[constexpr] int QRect::width() const▲
[constexpr] int QRect::x() const▲
[constexpr] int QRect::y() const▲
QRect QRect::operator&(const QRect &rectangle) const▲
Returns the intersection of this rectangle and the given rectangle. Returns an empty rectangle if there is no intersection.
See Also▲
See also operator&=(), intersected()
QRect &QRect::operator&=(const QRect &rectangle)▲
[constexpr, since 5.1] QRect &QRect::operator+=(const QMargins &margins)▲
Adds the margins to the rectangle, growing it.
This function was introduced in Qt 5.1.
See Also▲
See also marginsAdded(), marginsRemoved(), operator-=()
[constexpr, since 5.1] QRect &QRect::operator-=(const QMargins &margins)▲
Returns a rectangle shrunk by the margins.
This function was introduced in Qt 5.1.
See Also▲
See also marginsRemoved(), operator+=(), marginsAdded()
QRect QRect::operator|(const QRect &rectangle) const▲
Returns the bounding rectangle of this rectangle and the given rectangle.
See Also▲
See also operator|=(), united()
QRect &QRect::operator|=(const QRect &rectangle)▲
Related Non-Members▲
[constexpr] bool operator!=(const QRect &r1, const QRect &r2)▲
Returns true if the rectangles r1 and r2 are different, otherwise returns false.
[constexpr, since 5.1] QRect operator+(const QRect &rectangle, const QMargins &margins)▲
Returns the rectangle grown by the margins.
This function was introduced in Qt 5.1.
[constexpr, since 5.1] QRect operator+(const QMargins &margins, const QRect &rectangle)▲
This is an overloaded function.
Returns the rectangle grown by the margins.
This function was introduced in Qt 5.1.
[constexpr, since 5.3] QRect operator-(const QRect &lhs, const QMargins &rhs)▲
Returns the lhs rectangle shrunk by the rhs margins.
This function was introduced in Qt 5.3.
QDataStream &operator<<(QDataStream &stream, const QRect &rectangle)▲
Writes the given rectangle to the given stream, and returns a reference to the stream.
See Also▲
See also Serializing Qt Data Types
[constexpr] bool operator==(const QRect &r1, const QRect &r2)▲
Returns true if the rectangles r1 and r2 are equal, otherwise returns false.
QDataStream &operator>>(QDataStream &stream, QRect &rectangle)▲
Reads a rectangle from the given stream into the given rectangle, and returns a reference to the stream.
See Also▲
See also Serializing Qt Data Types