QTextToSpeech Class▲
-
Header: QTextToSpeech
-
CMake:
find_package(Qt6 REQUIRED COMPONENTS TextToSpeech)
target_link_libraries(mytarget PRIVATE Qt6::TextToSpeech)
-
qmake: QT += texttospeech
-
Inherits: QObject
Detailed Description▲
Use say() to start synthesizing text, and stop(), pause(), and resume() to control the reading of the text.
The list of voices the engine supports for the current language is returned by availableVoices(). Change the language using setLocale(), using one of the availableLocales() that is a good match for the language that the input text is in, and for the accent of the desired voice output. This will change the list of available voices on most platforms. Then use one of the available voices in a call to setVoice().
Which locales and voices the engine supports depends usually on the Operating System configuration. E.g. on macOS, end users can install voices through the Accessibility panel in System Preferences.
Member Type Documentation▲
enum QTextToSpeech::BoundaryHint▲
describes when speech should be stopped and paused.
|
Constant |
Value |
Description |
|---|---|---|
|
QTextToSpeech::BoundaryHint::Default |
0 |
Uses the engine specific default behavior. |
|
QTextToSpeech::BoundaryHint::Immediate |
1 |
The engine should stop playback immediately. |
|
QTextToSpeech::BoundaryHint::Word |
2 |
Stop speech when the current word is finished. |
|
QTextToSpeech::BoundaryHint::Sentence |
3 |
Stop speech when the current sentence is finished. |
These are hints to the engine. The current engine might not support all options.
enum QTextToSpeech::ErrorReason▲
This enum describes the current error, if any, of the QTextToSpeech engine.
|
Constant |
Value |
Description |
|---|---|---|
|
QTextToSpeech::ErrorReason::NoError |
0 |
No error has occurred. |
|
QTextToSpeech::ErrorReason::Initialization |
1 |
The backend could not be initialized, e.g. due to a missing driver or operating system requirement. |
|
QTextToSpeech::ErrorReason::Configuration |
2 |
The given backend configuration is inconsistent, e.g. due to wrong voice name or parameters. |
|
QTextToSpeech::ErrorReason::Input |
3 |
The given text could not be synthesized, e.g. due to invalid size or characters. |
|
QTextToSpeech::ErrorReason::Playback |
4 |
Audio playback failed e.g. due to missing audio device, wrong format or audio streaming interruption. |
Use errorReason() to obtain the current error and errorString() to get the related error message.
See Also▲
See also errorOccurred()
enum QTextToSpeech::State▲
This enum describes the current state of the text-to-speech engine.
|
Constant |
Value |
Description |
|---|---|---|
|
QTextToSpeech::Ready |
0 |
The synthesizer is ready to start a new text. This is also the state after a text was finished. |
|
QTextToSpeech::Speaking |
1 |
Text is being spoken. |
|
QTextToSpeech::Paused |
2 |
The synthesis was paused and can be resumed with resume(). |
|
QTextToSpeech::Error |
3 |
An error has occurred. Details are given by errorReason(). |
See Also▲
See also QTextToSpeech::ErrorReason, errorReason(), errorString()
Property Documentation▲
[since 6.4] engine : QString▲
This property holds the engine used to synthesize text to speech.
Changing the engine stops any ongoing speech.
On most platforms, changing the engine will update the list of available locales and available voices.
This property was introduced in Qt 6.4.
Access functions:
-
engine() const
-
bool setEngine(const &engine, const QVariantMap ¶ms = QVariantMap())
Notifier signal:
-
void engineChanged(const &engine)
locale : QLocale▲
This property holds the current locale in use.
By default, the system locale is used.
On some platforms, changing the locale will update the list of available voices, and if the current voice is not available with the new locale, a new voice will be set.
Access functions:
-
locale() const
-
void setLocale(const &locale)
Notifier signal:
-
void localeChanged(const &locale)
See Also▲
See also voice
pitch : double▲
This property holds the voice pitch, ranging from -1.0 to 1.0.
The default of 0.0 is the normal speech pitch.
Access functions:
-
double pitch() const
-
void setPitch(double pitch)
Notifier signal:
-
void pitchChanged(double pitch)
rate : double▲
This property holds the current voice rate, ranging from -1.0 to 1.0.
The default value of 0.0 is normal speech flow.
Access functions:
-
double rate() const
-
void setRate(double rate)
Notifier signal:
-
void rateChanged(double rate)
[read-only] state : const State▲
This property holds the current state of the speech synthesizer.
Use say() to start synthesizing text with the current voice and locale.
Access functions:
-
state() const
Notifier signal:
-
void stateChanged( state)
voice : QVoice▲
This property holds the voice that will be used for the speech.
The voice needs to be one of the voices available for the engine.
On some platforms, setting the voice changes other voice attributes such as locale, pitch, and so on. These changes trigger the emission of signals.
Access functions:
-
voice() const
-
void setVoice(const &voice)
Notifier signal:
-
void voiceChanged(const &voice)
volume : double▲
This property holds the current volume, ranging from 0.0 to 1.0.
The default value is the platform's default volume.
Access functions:
-
double volume() const
-
void setVolume(double volume)
Notifier signal:
-
void volumeChanged(double volume)
Member Function Documentation▲
[explicit] QTextToSpeech::QTextToSpeech(QObject *parent = nullptr)▲
Loads a text-to-speech engine from a plug-in that uses the default engine plug-in and constructs a QTextToSpeech object as the child of parent.
The default engine is platform-specific.
If the engine initializes correctly, then the state of the engine will change to QTextToSpeech::Ready; note that this might happen asynchronously. If the plugin fails to load, then state will be set to QTextToSpeech::Error.
See Also▲
See also availableEngines()
[explicit] QTextToSpeech::QTextToSpeech(const QString &engine, QObject *parent = nullptr)▲
Loads a text-to-speech engine from a plug-in that matches parameter engine and constructs a QTextToSpeech object as the child of parent.
If engine is empty, the default engine plug-in is used. The default engine is platform-specific.
If the engine initializes correctly, the state of the engine will be set to QTextToSpeech::Ready. If the plugin fails to load, or if the engine fails to initialize, the engine's state will be set to QTextToSpeech::Error.
See Also▲
See also availableEngines()
[explicit, since 6.4] QTextToSpeech::QTextToSpeech(const QString &engine, const QVariantMap ¶ms, QObject *parent = nullptr)▲
Loads a text-to-speech engine from a plug-in that matches parameter engine and constructs a QTextToSpeech object as the child of parent, passing params through to the engine.
If engine is empty, the default engine plug-in is used. The default engine is platform-specific. Which key/value pairs in params are supported depends on the engine. See the engine documentation for details. Unsupported entries will be ignored.
If the engine initializes correctly, the state of the engine will be set to QTextToSpeech::Ready. If the plugin fails to load, or if the engine fails to initialize, the engine's state will be set to QTextToSpeech::Error.
This function was introduced in Qt 6.4.
See Also▲
See also availableEngines()
[override virtual] QTextToSpeech::~QTextToSpeech()▲
Destroys this QTextToSpeech object, stopping any speech.
[static] QStringList QTextToSpeech::availableEngines()▲
QList<QLocale> QTextToSpeech::availableLocales() const▲
Returns the list of locales that are supported by the active engine.
QList<QVoice> QTextToSpeech::availableVoices() const▲
Returns the list of voices available for the current locale.
If no locale has been set, the system locale is used.
void QTextToSpeech::errorOccurred(QTextToSpeech::ErrorReason reason, const QString &errorString)▲
This signal is emitted after an error occurred and the state has been set to QTextToSpeech::Error. The reason parameter specifies the type of error, and the errorString provides a human-readable error description.
QTextToSpeech::ErrorReason is not a registered metatype, so for queued connections, you will have to register it with Q_DECLARE_METATYPE() and qRegisterMetaType().
See Also▲
See also errorReason(), errorString(), Creating Custom Qt Types
QTextToSpeech::ErrorReason QTextToSpeech::errorReason() const▲
QString QTextToSpeech::errorString() const▲
void QTextToSpeech::pause(QTextToSpeech::BoundaryHint boundaryHint = QTextToSpeech::BoundaryHint::Default)▲
Pauses the current speech at boundaryHint.
Whether the boundaryHint is respected depends on the engine.
See Also▲
See also resume()
void QTextToSpeech::resume()▲
void QTextToSpeech::say(const QString &text)▲
Starts synthesizing the text.
This function starts sythesizing the speech asynchronously, and reads the text to the default audio output device.
All in-progress readings are stopped before beginning to read the recently synthesized text.
The current state is available using the state property, and is set to Speaking once the reading starts. When the reading is done, state will be set to Ready.
See Also▲
[since 6.4] bool QTextToSpeech::setEngine(const QString &engine, const QVariantMap ¶ms = QVariantMap())▲
Sets the engine used by this QTextToSpeech object to engine, passing params through to the engine constructor.
Returns whether engine could be set successfully.
Which key/value pairs in params are supported depends on the engine. See the engine documentation for details. Unsupported entries will be ignored.
Setter function for property engine.
This function was introduced in Qt 6.4.
See Also▲
See also engine()