The QDial class provides a rounded range control (like a speedometer or potentiometer).
More...
Detailed Description
The QDial class provides a rounded range control (like a speedometer or potentiometer).
QDial is used when the user needs to control a value within a
program-definable range, and the range either wraps around
(typically, 0..359 degrees) or the dialog layout needs a square
widget.
Both API- and UI-wise, the dial is very similar to a slider. Indeed, when wrapping() is FALSE (the default)
there is no real difference between a slider and a dial. They
have the same signals, slots and member functions, all of which do
the same things. Which one you use depends only on your taste
and on the application.
The dial initially emits valueChanged() signals continuously while
the slider is being moved; you can make it emit the signal less
often by calling setTracking(FALSE). dialMoved() is emitted
continuously even when tracking() is FALSE.
The slider also emits dialPressed() and dialReleased() signals
when the mouse button is pressed and released. But note that the
dial's value can change without these signals being emitted; the
keyboard and wheel can be used to change the value.
Unlike the slider, QDial attempts to draw a "nice" number of
notches rather than one per lineStep(). If possible, the number
of notches drawn is one per lineStep(), but if there aren't enough
pixels to draw every one, QDial will draw every second, third
etc., notch. notchSize() returns the number of units per notch,
hopefully a multiple of lineStep(); setNotchTarget() sets the
target distance between neighbouring notches in pixels. The
default is 3.75 pixels.
Like the slider, the dial makes the QRangeControl functions
setValue(), addLine(), subtractLine(), addPage() and
subtractPage() available as slots.
The dial's keyboard interface is fairly simple: The left/up and
right/down arrow keys move by lineStep(), page up and page down by
pageStep() and Home and End to minValue() and maxValue().
See also QScrollBar, QSpinBox, GUI Design Handbook: Slider, and Basic Widgets.
Member Function Documentation
QDial::QDial ( QWidget * parent = 0, const char * name = 0, WFlags f = 0 )
Constructs a dial called name with parent parent. f is
propagated to the QWidget constructor. It has the default range of
a QRangeControl.
QDial::QDial ( int minValue, int maxValue, int pageStep, int value, QWidget * parent = 0, const char * name = 0 )
Constructs a dial called name with parent parent. The dial's
value can never be smaller than minValue or greater than maxValue. Its page step size is pageStep, and its initial value
is value.
value is forced to be within the legal range.
QDial::~QDial ()
Destroys the dial.
void QDial::addLine () [slot]
Increments the dial's value() by one lineStep().
void QDial::addPage () [slot]
Increments the dial's value() by one pageStep() of steps.
void QDial::dialMoved ( int value ) [signal]
This signal is emitted whenever the dial value changes. The
frequency of this signal is not influenced by setTracking().
See also valueChanged().
void QDial::dialPressed () [signal]
This signal is emitted when the user begins mouse interaction with
the dial.
See also dialReleased().
void QDial::dialReleased () [signal]
This signal is emitted when the user ends mouse interaction with
the dial.
See also dialPressed().
int QDial::lineStep () const
Returns the current line step.
See the "lineStep" property for details.
int QDial::maxValue () const
Returns the current maximum value.
See the "maxValue" property for details.
int QDial::minValue () const
Returns the current minimum value.
See the "minValue" property for details.
int QDial::notchSize () const
Returns the current notch size.
See the "notchSize" property for details.
double QDial::notchTarget () const
Returns the target number of pixels between notches.
See the "notchTarget" property for details.
bool QDial::notchesVisible () const
Returns TRUE if the notches are shown; otherwise returns FALSE.
See the "notchesVisible" property for details.
int QDial::pageStep () const
Returns the current page step.
See the "pageStep" property for details.
void QDial::rangeChange () [virtual protected]
Reimplemented to ensure tick-marks are consistent with the new range.
Reimplemented from QRangeControl.
void QDial::repaintScreen ( const QRect * cr = 0 ) [virtual protected]
Paints the dial using clip region cr.
void QDial::setLineStep ( int )
Sets the current line step.
See the "lineStep" property for details.
void QDial::setMaxValue ( int )
Sets the current maximum value.
See the "maxValue" property for details.
void QDial::setMinValue ( int )
Sets the current minimum value.
See the "minValue" property for details.
void QDial::setNotchTarget ( double ) [virtual]
Sets the target number of pixels between notches.
See the "notchTarget" property for details.
void QDial::setNotchesVisible ( bool b ) [virtual slot]
Sets whether the notches are shown to b.
See the "notchesVisible" property for details.
void QDial::setPageStep ( int )
Sets the current page step.
See the "pageStep" property for details.
void QDial::setTracking ( bool enable ) [virtual slot]
Sets whether tracking is enabled to enable.
See the "tracking" property for details.
void QDial::setValue ( int ) [virtual slot]
Sets the current dial value.
See the "value" property for details.
void QDial::setWrapping ( bool on ) [virtual slot]
Sets whether wrapping is enabled to on.
See the "wrapping" property for details.
void QDial::subtractLine () [slot]
Decrements the dial's value() by one lineStep().
void QDial::subtractPage () [slot]
Decrements the dial's value() by one pageStep() of steps.
bool QDial::tracking () const
Returns TRUE if tracking is enabled; otherwise returns FALSE.
See the "tracking" property for details.
int QDial::value () const
Returns the current dial value.
See the "value" property for details.
void QDial::valueChange () [virtual protected]
Reimplemented to ensure the display is correct and to emit the
valueChanged(int) signal when appropriate.
Reimplemented from QRangeControl.
void QDial::valueChanged ( int value ) [signal]
This signal is emitted whenever the dial's value changes. The
frequency of this signal is influenced by setTracking().
bool QDial::wrapping () const
Returns TRUE if wrapping is enabled; otherwise returns FALSE.
See the "wrapping" property for details.
Property Documentation
int lineStep
This property holds the current line step.
setLineStep() calls the virtual stepChange() function if the new
line step is different from the previous setting.
See also QRangeControl::setSteps(), pageStep, and setRange().
Set this property's value with setLineStep() and get this property's value with lineStep().
int maxValue
This property holds the current maximum value.
When setting this property, the QDial::minValue is adjusted if
necessary to ensure that the range remains valid.
See also setRange().
Set this property's value with setMaxValue() and get this property's value with maxValue().
int minValue
This property holds the current minimum value.
When setting this property, the QDial::maxValue is adjusted if
necessary to ensure that the range remains valid.
See also setRange().
Set this property's value with setMinValue() and get this property's value with minValue().
int notchSize
This property holds the current notch size.
The notch size is in range control units, not pixels, and if
possible it is a multiple of lineStep() that results in an
on-screen notch size near notchTarget().
See also notchTarget and lineStep.
Get this property's value with notchSize().
double notchTarget
This property holds the target number of pixels between notches.
The notch target is the number of pixels QDial attempts to put
between each notch.
The actual size may differ from the target size.
Set this property's value with setNotchTarget() and get this property's value with notchTarget().
bool notchesVisible
This property holds whether the notches are shown.
If TRUE, the notches are shown. If FALSE (the default) notches are
not shown.
Set this property's value with setNotchesVisible() and get this property's value with notchesVisible().
int pageStep
This property holds the current page step.
setPageStep() calls the virtual stepChange() function if the new
page step is different from the previous setting.
See also stepChange().
Set this property's value with setPageStep() and get this property's value with pageStep().
bool tracking
This property holds whether tracking is enabled.
If TRUE (the default), tracking is enabled. This means that the
arrow can be moved using the mouse; otherwise the arrow cannot be
moved with the mouse.
Set this property's value with setTracking() and get this property's value with tracking().
int value
This property holds the current dial value.
This is guaranteed to be within the range
QDial::minValue..QDial::maxValue.
See also minValue and maxValue.
Set this property's value with setValue() and get this property's value with value().
bool wrapping
This property holds whether wrapping is enabled.
If TRUE, wrapping is enabled. This means that the arrow can be
turned around 360°. Otherwise there is some space at the bottom of
the dial which is skipped by the arrow.
This property's default is FALSE.
Set this property's value with setWrapping() and get this property's value with wrapping().
This file is part of the Qt toolkit.
Copyright © 1995-2003
Trolltech. All Rights Reserved.
