|
|
              
QRect Class Reference |
 |  |
| intersect() | unite() |
The isEmpty() function returns true if left() > right() or top() > bottom(). Note that an empty rectangle is not valid: The isValid() function returns true if left() <= right() and top() <= bottom(). A null rectangle (isNull() == true) on the other hand, has both width and height set to 0.
Finally, QRect objects can be streamed as well as compared.
Rendering
When using an anti-aliased painter, the boundary line of a QRect will be rendered symmetrically on both sides of the mathematical rectangle's boundary line. But when using an aliased painter (the default) other rules apply.
Then, when rendering with a one pixel wide pen the QRect's boundary line will be rendered to the right and below the mathematical rectangle's boundary line.
When rendering with a two pixels wide pen the boundary line will be split in the middle by the mathematical rectangle. This will be the case whenever the pen is set to an even number of pixels, while rendering with a pen with an odd number of pixels, the spare pixel will be rendered to the right and below the mathematical rectangle as in the one pixel case.
 |  |
| Logical representation | One pixel wide pen |
 |  |
| Two pixel wide pen | Three pixel wide pen |
Coordinates
The QRect class provides a collection of functions that return the various rectangle coordinates, and enable manipulation of these. QRect also provide functions to move the rectangle relative to the various coordinates.
For example the left(), setLeft() and moveLeft() functions as an example: left() returns the x-coordinate of the rectangle's left edge, setLeft() sets the left edge of the rectangle to the given x coordinate (it may change the width, but will never change the rectangle's right edge) and moveLeft() moves the entire rectangle horizontally, leaving the rectangle's left edge at the given x coordinate and its size unchanged.
Note that for historical reasons the values returned by the bottom() and right() functions deviate from the true bottom-right corner of the rectangle: The right() function returns left() + width() - 1 and the bottom() function returns top() + height() - 1. The same is the case for the point returned by the bottomRight() convenience function. In addition, the x and y coordinate of the topRight() and bottomLeft() functions, respectively, contain the same deviation from the true right and bottom edges.
We recommend that you use x() + width() and y() + height() to find the true bottom-right corner, and avoid right() and bottom(). Another solution is to use QRectF: The QRectF class defines a rectangle in the plane using floating point accuracy for coordinates, and the QRectF::right() and QRectF::bottom() functions do return the true bottom-right corner.
It is also possible to add offsets to this rectangle's coordinates using the adjust() function, as well as retrieve a new rectangle based on adjustments of the original one using the adjusted() function. If either of the width and height is negative, use the normalized() function to retrieve a rectangle where the corners are swapped.
In addition, QRect provides the getCoords() function which extracts the position of the rectangle's top-left and bottom-right corner, and the getRect() function which extracts the rectangle's top-left corner, width and height. Use the setCoords() and setRect() function to manipulate the rectangle's coordinates and dimensions in one go.
Member Function Documentation
QRect::QRect ()
Constructs a null rectangle.
See also isNull().
QRect::QRect ( const QPoint & topLeft, const QPoint & bottomRight )
Constructs a rectangle with the given topLeft and bottomRight corners.
See also setTopLeft() and setBottomRight().
QRect::QRect ( const QPoint & topLeft, const QSize & size )
Constructs a rectangle with the given topLeft corner and the given size.
See also setTopLeft() and setSize().
QRect::QRect ( int x, int y, int width, int height )
Constructs a rectangle with (x, y) as its top-left corner and the given width and height.
See also setRect().
void QRect::adjust ( int dx1, int dy1, int dx2, int dy2 )
Adds dx1, dy1, dx2 and dy2 respectively to the existing coordinates of the rectangle.
See also adjusted() and setRect().
QRect QRect::adjusted ( int dx1, int dy1, int dx2, int dy2 ) const
Returns a new rectangle with dx1, dy1, dx2 and dy2 added respectively to the existing coordinates of this rectangle.
See also adjust().
int QRect::bottom () const
Returns the y-coordinate of the rectangle's bottom edge.
Note that for historical reasons this function returns top() + height() - 1; use y() + height() to retrieve the true y-coordinate.
See also setBottom(), bottomLeft(), and bottomRight().
QPoint QRect::bottomLeft () const
Returns the position of the rectangle's bottom-left corner. Note that for historical reasons this function returns QPoint(left(), top() + height() - 1).
See also setBottomLeft(), bottom(), and left().
QPoint QRect::bottomRight () const
Returns the position of the rectangle's bottom-right corner.
Note that for historical reasons this function returns QPoint(left() + width() -1, top() + height() - 1).
See also setBottomRight(), bottom(), and right().
QPoint QRect::center () const
Returns the center point of the rectangle.
See also moveCenter().
bool QRect::contains ( const QPoint & point, bool proper = false ) const
Returns true if the the given point is inside or on the edge of the rectangle, otherwise returns false. If proper is true, this function only returns true if the given point is inside the rectangle (i.e. not on the edge).
See also intersects().
bool QRect::contains ( int x, int y, bool proper ) const
This is an overloaded member function, provided for convenience.
Returns true if the point (x, y) is inside or on the edge of the rectangle, otherwise returns false. If proper is true, this function only returns true if the point is entirely inside the rectangle(not on the edge).
bool QRect::contains ( int x, int y ) const
This is an overloaded member function, provided for convenience.
Returns true if the point (x, y) is inside this rectangle, otherwise returns false.
bool QRect::contains ( const QRect & rectangle, bool proper = false ) const
This is an overloaded member function, provided for convenience.
Returns true if the given rectangle is inside this rectangle. otherwise returns false. If proper is true, this function only returns true if the rectangle is entirely inside this rectangle (not on the edge).
void QRect::getCoords ( int * x1, int * y1, int * x2, int * y2 ) const
Extracts the position of the rectangle's top-left corner to *x1 and *y1, and the position of the bottom-right corner to *x2 and *y2.
See also setCoords() and getRect().
void QRect::getRect ( int * x, int * y, int * width, int * height ) const
Extracts the position of the rectangle's top-left corner to *x and *y, and its dimensions to *width and *height.
See also setRect() and getCoords().
int QRect::height () const
Returns the height of the rectangle.
See also setHeight(), width(), and size().
QRect QRect::intersect ( const QRect & rectangle ) const
Returns the intersection of this rectangle and the given rectangle. Note that r.intersect(s) is equivalent to r&s.
See also intersects(), unite(), and operator&=().
bool QRect::intersects ( const QRect & rectangle ) const
Returns true if this rectangle intersects with the given rectangle (i.e. there is at least one pixel that is within both rectangles), otherwise returns false.
The intersection rectangle can be retrieved using the intersect() function.
See also contains().
bool QRect::isEmpty () const
Returns true if the rectangle is empty, otherwise returns false.
An empty rectangle has a left() > right() or top() > bottom(). An empty rectangle is not valid (i.e isEmpty() == !isValid()).
Use the normalized() function to retrieve a rectangle where the corners are swapped.
See also isNull(), isValid(), and normalized().
bool QRect::isNull () const
Returns true if the rectangle is a null rectangle, otherwise returns false.
A null rectangle has both the width and the height set to 0 (i.e. right() == left() - 1 and bottom() == top() - 1). A null rectangle is also empty, and hence is not valid.
See also isEmpty() and isValid().
bool QRect::isValid () const
Returns true if the rectangle is valid, otherwise returns false.
A valid rectangle has a left() < right() and top() < bottom(). Note that non-trivial operations like intersections are not defined for invalid rectangles. A valid rectangle is not empty (i.e. isValid() == !isEmpty()).
See also isNull(), isEmpty(), and normalized().
int QRect::left () const
Returns the x-coordinate of the rectangle's left edge. Equivalent to x().
See also setLeft(), topLeft(), and bottomLeft().
void QRect::moveBottom ( int y )
Moves the rectangle vertically, leaving the rectangle's bottom edge at the given y coordinate. The rectangle's size is unchanged.
See also bottom(), setBottom(), and moveTop().
void QRect::moveBottomLeft ( const QPoint & position )
Moves the rectangle, leaving the bottom-left corner at the given position. The rectangle's size is unchanged.
See also setBottomLeft(), moveBottom(), and moveLeft().
void QRect::moveBottomRight ( const QPoint & position )
Moves the rectangle, leaving the bottom-right corner at the given position. The rectangle's size is unchanged.
See also setBottomRight(), moveRight(), and moveBottom().
void QRect::moveCenter ( const QPoint & position )
Moves the rectangle, leaving the center point at the given position. The rectangle's size is unchanged.
See also center().
void QRect::moveLeft ( int x )
Moves the rectangle horizontally, leaving the rectangle's left edge at the given x coordinate. The rectangle's size is unchanged.
See also left(), setLeft(), and moveRight().
void QRect::moveRight ( int x )
Moves the rectangle horizontally, leaving the rectangle's right edge at the given x coordinate. The rectangle's size is unchanged.
See also right(), setRight(), and moveLeft().
void QRect::moveTo ( int x, int y )
Moves the rectangle, leaving the top-left corner at the given position (x, y). The rectangle's size is unchanged.
See also translate() and moveTopLeft().
void QRect::moveTo ( const QPoint & position )
This is an overloaded member function, provided for convenience.
Moves the rectangle, leaving the top-left corner at the given position.
void QRect::moveTop ( int y )
Moves the rectangle vertically, leaving the rectangle's top edge at the given y coordinate. The rectangle's size is unchanged.
See also top(), setTop(), and moveBottom().
void QRect::moveTopLeft ( const QPoint & position )
Moves the rectangle, leaving the top-left corner at the given position. The rectangle's size is unchanged.
See also setTopLeft(), moveTop(), and moveLeft().
void QRect::moveTopRight ( const QPoint & position )
Moves the rectangle, leaving the top-right corner at the given position. The rectangle's size is unchanged.
See also setTopRight(), moveTop(), and moveRight().
QRect QRect::normalized () const
Returns a normalized rectangle; i.e. a rectangle that has a non-negative width and height.
If width() < 0 the function swaps the left and right corners, and it swaps the top and bottom corners if height() < 0.
See also isValid() and isEmpty().
int QRect::right () const
Returns the x-coordinate of the rectangle's right edge.
Note that for historical reasons this function returns left() + width() - 1; use x() + width() to retrieve the true x-coordinate.
See also setRight(), topRight(), and bottomRight().
void QRect::setBottom ( int y )
Sets the bottom edge of the rectangle to the given y coordinate. May change the height, but will never change the top edge of the rectangle.
See also bottom() and moveBottom().
void QRect::setBottomLeft ( const QPoint & position )
Set the bottom-left corner of the rectangle to the given position. May change the size, but will the never change the top-right corner of the rectangle.
See also bottomLeft() and moveBottomLeft().
void QRect::setBottomRight ( const QPoint & position )
Set the bottom-right corner of the rectangle to the given position. May change the size, but will the never change the top-left corner of the rectangle.
See also bottomRight() and moveBottomRight().
void QRect::setCoords ( int x1, int y1, int x2, int y2 )
Sets the coordinates of the rectangle's top-left corner to (x1, y1), and the coordinates of its bottom-right corner to (x2, y2).
See also coords(), getCoords(), and setRect().
void QRect::setHeight ( int height )
Sets the height of the rectangle to the given height. The bottom edge is changed, but not the top one.
See also height() and setSize().
void QRect::setLeft ( int x )
Sets the left edge of the rectangle to the given x coordinate. May change the width, but will never change the right edge of the rectangle.
Equivalent to setX().
See also left() and moveLeft().
void QRect::setRect ( int x, int y, int width, int height )
Sets the coordinates of the rectangle's top-left corner to (x, y), and its size to the given width and height.
See also rect(), getRect(), and setCoords().
void QRect::setRight ( int x )
Sets the right edge of the rectangle to the given x coordinate. May change the width, but will never change the left edge of the rectangle.
See also right() and moveRight().
void QRect::setSize ( const QSize & size )
Sets the size of the rectangle to the given size. The top-left corner is not moved.
See also size(), setWidth(), and setHeight().
void QRect::setTop ( int y )
Sets the top edge of the rectangle to the given y coordinate. May change the height, but will never change the bottom edge of the rectangle.
Equivalent to setY().
void QRect::setTopLeft ( const QPoint & position )
Set the top-left corner of the rectangle to the given position. May change the size, but will the never change the bottom-right corner of the rectangle.
See also topLeft() and moveTopLeft().
void QRect::setTopRight ( const QPoint & position )
Set the top-right corner of the rectangle to the given position. May change the size, but will the never change the bottom-left corner of the rectangle.
See also topRight() and moveTopRight().
void QRect::setWidth ( int width )
Sets the width of the rectangle to the given width. The right edge is changed, but not the left one.
See also width() and setSize().
void QRect::setX ( int x )
Sets the left edge of the rectangle to the given x coordinate. May change the width, but will never change the right edge of the rectangle.
Equivalent to setLeft().
See also x(), setY(), and setTopLeft().
void QRect::setY ( int y )
Sets the top edge of the rectangle to the given y coordinate. May change the height, but will never change the bottom edge of the rectangle.
Equivalent to setTop().
See also y(), setX(), and setTopLeft().
QSize QRect::size () const
Returns the size of the rectangle.
See also setSize(), width(), and height().
int QRect::top () const
Returns the y-coordinate of the rectangle's top edge. Equivalent to y().
See also setTop(), topLeft(), and topRight().
QPoint QRect::topLeft () const
Returns the position of the rectangle's top-left corner.
See also setTopLeft(), top(), and left().
QPoint QRect::topRight () const
Returns the position of the rectangle's top-right corner.
Note that for historical reasons this function returns QPoint(left() + width() -1, top()).
See also setTopRight(), top(), and right().
void QRect::translate ( int dx, int dy )
Moves the rectangle dx along the x axis and dy along the y axis, relative to the current position. Positive values move the rectangle to the right and down.
See also moveTopLeft(), moveTo(), and translated().
void QRect::translate ( const QPoint & offset )
This is an overloaded member function, provided for convenience.
Moves the rectangle offset.x() along the x axis and offset.y() along the y axis, relative to the current position.
QRect QRect::translated ( int dx, int dy ) const
Returns a copy of the rectangle that is translated dx along the x axis and dy along the y axis, relative to the current position. Positive values move the rectangle to the right and down.
See also translate().
QRect QRect::translated ( const QPoint & offset ) const
This is an overloaded member function, provided for convenience.
Returns a copy of the rectangle that is translated offset.x() along the x axis and offset.y() along the y axis, relative to the current position.
QRect QRect::unite ( const QRect & rectangle ) const
Returns the bounding rectangle of this rectangle and the given rectangle.
See also intersect().
int QRect::width () const
Returns the width of the rectangle.
See also setWidth(), height(), and size().
int QRect::x () const
Returns the x-coordinate of the rectangle's left edge. Equivalent to left().
See also setX(), y(), and topLeft().
int QRect::y () const
Returns the y-coordinate of the rectangle's top edge. Equivalent to top().
See also setY(), x(), and topLeft().
QRect QRect::operator& ( const QRect & rectangle ) const
Returns the intersection of this rectangle and the given rectangle. Returns an empty rectangle if there is no intersection.
See also operator&=() and intersect().
QRect & QRect::operator&= ( const QRect & rectangle )
Intersects this rectangle with the given rectangle.
See also intersect() and operator&().
QRect QRect::operator| ( const QRect & rectangle ) const
Returns the bounding rectangle of this rectangle and the given rectangle.
See also operator|=() and unite().
QRect & QRect::operator|= ( const QRect & rectangle )
Unites this rectangle with the given rectangle.
See also unite() and operator|().
Related Non-Members
bool operator!= ( const QRect & r1, const QRect & r2 )
This is an overloaded member function, provided for convenience.
Returns true if the rectangles r1 and r2 are different, otherwise returns false.
QDataStream & operator<< ( QDataStream & stream, const QRect & rectangle )
This is an overloaded member function, provided for convenience.
Writes the given rectangle to the given stream, and returns a reference to the stream.
See also Format of the QDataStream Operators.
bool operator== ( const QRect & r1, const QRect & r2 )
This is an overloaded member function, provided for convenience.
Returns true if the rectangles r1 and r2 are equal, otherwise returns false.
QDataStream & operator>> ( QDataStream & stream, QRect & rectangle )
This is an overloaded member function, provided for convenience.
Reads a rectangle from the given stream into the given rectangle, and returns a reference to the stream.
See also Format of the QDataStream Operators.
|
|
Best Of
Actualités les plus lues
- 2017 : un quinquennat pour une nouvelle version du C++ ? Possible, selon Herb Sutter 6
- Qt Commercial : Digia organise un webinar gratuit le 27 mars sur la conception d'interfaces utilisateur et d'applications avec le framework 0
- Orientation de l'écran en QML, un article de Christophe Dumez traduit par Thibaut Cuvelier 0
- « Quelque chose ne va vraiment pas avec les développeurs "modernes" », un développeur à "l'ancienne" critique la multiplication des bibliothèques 82
- Apercevoir la troisième dimension ou l'utilisation multithreadée d'OpenGL dans Qt, un article des Qt Quarterly traduit par Guillaume Belz 0
- Les développeurs ignorent-ils trop les failles découvertes dans leur code ? Prenez-vous en compte les remarques des autres ? 17
- BlackBerry 10 : premières images du prochain OS de RIM qui devrait intégrer des widgets et des tuiles inspirées de Windows Phone 0
- Quelles nouveautés de C++11 Visual C++ doit-il rapidement intégrer ? Donnez-nous votre avis 10
- Adieu qmake, bienvenue qbs : Qt Building Suite, un outil déclaratif et extensible pour la compilation de projets Qt 17
- 2017 : un quinquennat pour une nouvelle version du C++ ? Possible, selon Herb Sutter 6
- Linus Torvalds : le "C++ est un langage horrible", en justifiant le choix du C pour le système de gestion de version Git 100
- Comment prendre en compte l'utilisateur dans vos applications ? Pour un développeur, « 90 % des utilisateurs sont des idiots » 229
- Quel est LE livre que tout développeur doit lire absolument ? Celui qui vous a le plus marqué et inspiré 96
- Apple cède et s'engage à payer des droits à Nokia, le conflit des brevets entre les deux firmes s'achève 158
- Nokia porte à nouveau plainte contre Apple pour violation de sept nouveaux brevets 158
- Quel est le code dont vous êtes le plus fier ? Pourquoi l'avez-vous écrit ? Et pourquoi vous a-t-il donné autant de satisfaction ? 83
- Le Draft final de la norme C++ 0X validé 181
Le Qt Developer Network au hasard
La création de colonnes dans une ListView en QML
Communauté
Ressources
- 91 cours et tutoriels Qt
- F.A.Q. Qt : 200 questions et réponses
- 48 Qt Quarterly, 35 Qt Labs et 22 Qt DevNet en français
- 43 outils Qt
- 99 sources Qt
- 26 binaires Qt
- 6 livres Qt et 9 critiques
- La documentation de Qt 4.7 en français : 157 classes, 70 concepts et 24 modules
- 3 certifications Qt
Liens utiles
Contact
- Vous souhaitez rejoindre la rédaction ou proposer un tutoriel, une traduction, une question... ? Postez dans le forum Contribuez ou contactez-nous par MP ou par email (voir en bas de page).
Qt dans le magazine
| Cette page est une traduction d'une page de la documentation de Qt, écrite par Nokia Corporation and/or its subsidiary(-ies). Les éventuels problèmes résultant d'une mauvaise traduction ne sont pas imputables à Nokia. | Qt 4.1 | |
| Copyright © 2012 Developpez LLC. Tous droits réservés Developpez LLC. Aucune reproduction, même partielle, ne peut être faite de ce site et de l'ensemble de son contenu : textes, documents et images sans l'autorisation expresse de Developpez LLC. Sinon, vous encourez selon la loi jusqu'à 3 ans de prison et jusqu'à 300 000 E de dommages et intérêts. Cette page est déposée à la SACD. | ||
| Vous avez déniché une erreur ? Un bug ? Une redirection cassée ? Ou tout autre problème, quel qu'il soit ? Ou bien vous désirez participer à ce projet de traduction ? N'hésitez pas à nous contacter ou par MP ! | ||
Copyright © 2000-2012 - www.developpez.com