QRegion Class Reference
^{[QtGui module]}

Additional License Information

On Qt/X11 and Qtopia Core, parts of this class rely on code obtained under the following license:

Copyright (c) 1987 X Consortium

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of the X Consortium shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the X Consortium.

Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts.

All Rights Reserved

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Digital not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.

DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

See also QPainter::setClipRegion(), QPainter::setClipRect(), and QPainterPath.

Member Type Documentation

enum QRegion::RegionType

Specifies the shape of the region to be created.

Member Function Documentation

QRegion::QRegion ()

Constructs an empty region.

See also isEmpty().

QRegion::QRegion ( int x, int y, int w, int h, RegionType t = Rectangle )

Constructs a rectangular or elliptic region.

If t is Rectangle, the region is the filled rectangle (x, y, w, h). If t is Ellipse, the region is the filled ellipse with center at (x + w / 2, y + h / 2) and size (w ,h).

QRegion::QRegion ( const QPolygon & a, Qt::FillRule fillRule = Qt::OddEvenFill )

Constructs a polygon region from the point array a with the fill rule specified by fillRule.

If fillRule is Qt::WindingFill, the polygon region is defined using the winding algorithm; if it is Qt::OddEvenFill, the odd-even fill algorithm is used.

Warning: This constructor can be used to create complex regions that will slow down painting when used.

QRegion::QRegion ( const QRegion & r )

Constructs a new region which is equal to region r.

QRegion::QRegion ( const QBitmap & bm )

Constructs a region from the bitmap bm.

The resulting region consists of the pixels in bitmap bm that are Qt::color1, as if each pixel was a 1 by 1 rectangle.

This constructor may create complex regions that will slow down painting when used. Note that drawing masked pixmaps can be done much faster using QPixmap::setMask().

QRegion::QRegion ( const QRect & r, RegionType t = Rectangle )

Create a region based on the rectange r with region type t.

If the rectangle is invalid a null region will be created.

See also QRegion::RegionType.

QRegion::~QRegion ()

Destroys the region.

QRect QRegion::boundingRect () const

Returns the bounding rectangle of this region. An empty region gives a rectangle that is QRect::isNull().

bool QRegion::contains ( const QPoint & p ) const

Returns true if the region contains the point p; otherwise returns false.

bool QRegion::contains ( const QRect & r ) const

This is an overloaded member function, provided for convenience.

Returns true if the region overlaps the rectangle r; otherwise returns false.

QRegion QRegion::eor ( const QRegion & r ) const

Returns a region which is the exclusive or (XOR) of this region and r.

The figure shows the exclusive or of two elliptical regions.

Handle QRegion::handle () const

Returns a platform-specific region handle. The Handle type is HRGN on Windows, Region on X11, and RgnHandle on Mac OS X.

Warning: This function is not portable.

Region QRegion::handle () const

This is an overloaded member function, provided for convenience.

void * QRegion::handle () const

This is an overloaded member function, provided for convenience.

QRegion QRegion::intersect ( const QRegion & r ) const

Returns a region which is the intersection of this region and r.

The figure shows the intersection of two elliptical regions.

bool QRegion::isEmpty () const

Returns true if the region is empty; otherwise returns false. An empty region is a region that contains no points.

Example:

    QRegion r1(10, 10, 20, 20);
    QRegion r2(40, 40, 20, 20);
    QRegion r3;
    r1.isNull();             // false
    r1.isEmpty();            // false
    r3.isNull();             // true
    r3.isEmpty();            // true
    r3 = r1.intersect(r2); // r3 = intersection of r1 and r2
    r3.isNull();             // false
    r3.isEmpty();            // true
    r3 = r1.unite(r2);     // r3 = union of r1 and r2
    r3.isNull();             // false
    r3.isEmpty();            // false

QVector<QRect> QRegion::rects () const

Returns an array of non-overlapping rectangles that make up the region.

The union of all the rectangles is equal to the original region.

QRegion QRegion::subtract ( const QRegion & r ) const

Returns a region which is r subtracted from this region.

The figure shows the result when the ellipse on the right is subtracted from the ellipse on the left. (left-right)

void QRegion::translate ( int dx, int dy )

Translates (moves) the region dx along the X axis and dy along the Y axis.

void QRegion::translate ( const QPoint & point )

This is an overloaded member function, provided for convenience.

Translates the region point.x() along the x axis and point.y() along the y axis, relative to the current position. Positive values move the region to the right and down.

Translates to the given point.

QRegion QRegion::translated ( int dx, int dy ) const

Returns a copy of the region that is translated dx along the x axis and dy along the y axis, relative to the current position. Positive values move the region to the right and down.

This function was introduced in Qt 4.1.

See also translate().

QRegion QRegion::translated ( const QPoint & p ) const

This is an overloaded member function, provided for convenience.

Returns a copy of the regtion that is translated p.x() along the x axis and p.y() along the y axis, relative to the current position. Positive values move the rectangle to the right and down.

This function was introduced in Qt 4.1.

See also translate().

QRegion QRegion::unite ( const QRegion & r ) const

Returns a region which is the union of this region and r.

The figure shows the union of two elliptical regions.

QRegion::operator QVariant () const

Returns the region as a QVariant

bool QRegion::operator!= ( const QRegion & other ) const

Returns true if this region is different from the other region; otherwise returns false.

const QRegion QRegion::operator& ( const QRegion & r ) const

Applies the intersect() function to this region and r. r1&r2 is equivalent to r1.intersect(r2)

See also intersect().

QRegion & QRegion::operator&= ( const QRegion & r )

Applies the intersect() function to this region and r and assigns the result to this region. r1&=r2 is equivalent to r1=r1.intersect(r2).

See also intersect().

const QRegion QRegion::operator+ ( const QRegion & r ) const

Applies the unite() function to this region and r. r1+r2 is equivalent to r1.unite(r2)

See also unite() and operator|().

QRegion & QRegion::operator+= ( const QRegion & r )

Applies the unite() function to this region and r and assigns the result to this region. r1+=r2 is equivalent to r1=r1.unite(r2).

See also intersect().

const QRegion QRegion::operator- ( const QRegion & r ) const

Applies the subtract() function to this region and r. r1-r2 is equivalent to r1.subtract(r2)

See also subtract().

QRegion & QRegion::operator-= ( const QRegion & r )

Applies the subtract() function to this region and r and assigns the result to this region. r1-=r2 is equivalent to r1=r1.subtract(r2).

See also subtract().

QRegion & QRegion::operator= ( const QRegion & r )

Assigns r to this region and returns a reference to the region.

bool QRegion::operator== ( const QRegion & r ) const

Returns true if the region is equal to r; otherwise returns false.

const QRegion QRegion::operator^ ( const QRegion & r ) const

Applies the eor() function to this region and r. r1^r2 is equivalent to r1.eor(r2)

See also eor().

QRegion & QRegion::operator^= ( const QRegion & r )

Applies the eor() function to this region and r and assigns the result to this region. r1^=r2 is equivalent to r1=r1.eor(r2).

See also eor().

const QRegion QRegion::operator| ( const QRegion & r ) const

Applies the unite() function to this region and r. r1|r2 is equivalent to r1.unite(r2)

See also unite() and operator+().

QRegion & QRegion::operator|= ( const QRegion & r )

Applies the unite() function to this region and r and assigns the result to this region. r1|=r2 is equivalent to r1=r1.unite(r2).

See also unite().

Related Non-Members

QDataStream & operator<< ( QDataStream & s, const QRegion & r )

This is an overloaded member function, provided for convenience.

Writes the region r to the stream s and returns a reference to the stream.

See also Format of the QDataStream operators.

QDataStream & operator>> ( QDataStream & s, QRegion & r )

This is an overloaded member function, provided for convenience.

Reads a region from the stream s into r and returns a reference to the stream.

See also Format of the QDataStream operators.