QFontMetrics Class Reference
[QtGui module]

QRect QFontMetrics::boundingRect ( QChar ch ) const

Returns the rectangle that is covered by ink if character ch were to be drawn at the origin of the coordinate system.

Note that the bounding rectangle may extend to the left of (0, 0) (e.g., for italicized fonts), and that the text output may cover all pixels in the bounding rectangle. For a space character the rectangle will usually be empty.

Note that the rectangle usually extends both above and below the base line.

Warning: The width of the returned rectangle is not the advance width of the character. Use boundingRect(const QString &) or width() instead.

See also width().

QRect QFontMetrics::boundingRect ( const QString & text ) const

Returns the bounding rectangle of the characters in the string specified by text. The bounding rectangle always covers at least the set of pixels the text would cover if drawn at (0, 0).

Note that the bounding rectangle may extend to the left of (0, 0), e.g. for italicized fonts, and that the width of the returned rectangle might be different than what the width() method returns.

If you want to know the advance width of the string (to layout a set of strings next to each other), use width() instead.

Newline characters are processed as normal characters, not as linebreaks.

The height of the bounding rectangle is at least as large as the value returned by height().

See also width(), height(), QPainter::boundingRect(), and tightBoundingRect().

QRect QFontMetrics::boundingRect ( int x, int y, int width, int height, int flags, const QString & text, int tabStops = 0, int * tabArray = 0 ) const

This is an overloaded function.

Returns the bounding rectangle for the given text within the rectangle specified by the x and y coordinates, width, and height.

If Qt::TextExpandTabs is set in flags and tabArray is non-null, it specifies a 0-terminated sequence of pixel-positions for tabs; otherwise, if tabStops is non-zero, it is used as the tab spacing (in pixels).

QRect QFontMetrics::boundingRect ( const QRect & rect, int flags, const QString & text, int tabStops = 0, int * tabArray = 0 ) const

This is an overloaded function.

Returns the bounding rectangle of the characters in the string specified by text, which is the set of pixels the text would cover if drawn at (0, 0). The drawing, and hence the bounding rectangle, is constrained to the rectangle rect.

The flags argument is the bitwise OR of the following flags:

• Qt::AlignLeft aligns to the left border, except for Arabic and Hebrew where it aligns to the right.
• Qt::AlignRight aligns to the right border, except for Arabic and Hebrew where it aligns to the left.
• Qt::AlignJustify produces justified text.
• Qt::AlignHCenter aligns horizontally centered.
• Qt::AlignTop aligns to the top border.
• Qt::AlignBottom aligns to the bottom border.
• Qt::AlignVCenter aligns vertically centered
• Qt::AlignCenter (== Qt::AlignHCenter | Qt::AlignVCenter)
• Qt::TextSingleLine ignores newline characters in the text.
• Qt::TextExpandTabs expands tabs (see below)
• Qt::TextShowMnemonic interprets "&x" as x; i.e., underlined.
• Qt::TextWordWrap breaks the text to fit the rectangle.

Qt::Horizontal alignment defaults to Qt::AlignLeft and vertical alignment defaults to Qt::AlignTop.

If several of the horizontal or several of the vertical alignment flags are set, the resulting alignment is undefined.

If Qt::TextExpandTabs is set in flags, then: if tabArray is non-null, it specifies a 0-terminated sequence of pixel-positions for tabs; otherwise if tabStops is non-zero, it is used as the tab spacing (in pixels).

Note that the bounding rectangle may extend to the left of (0, 0), e.g. for italicized fonts, and that the text output may cover all pixels in the bounding rectangle.

Newline characters are processed as linebreaks.

Despite the different actual character heights, the heights of the bounding rectangles of "Yes" and "yes" are the same.

The bounding rectangle returned by this function is somewhat larger than that calculated by the simpler boundingRect() function. This function uses the maximum left and right font bearings as is necessary for multi-line text to align correctly. Also, fontHeight() and lineSpacing() are used to calculate the height, rather than individual character heights.

See also width(), QPainter::boundingRect(), and Qt::Alignment.

int QFontMetrics::descent () const

Returns the descent of the font.

The descent is the distance from the base line to the lowest point characters extend to. In practice, some font designers break this rule, e.g. to accommodate an unusual character in an exotic language, so it is possible (though rare) that this value will be too small.

See also ascent().

QString QFontMetrics::elidedText ( const QString & text, Qt::TextElideMode mode, int width, int flags = 0 ) const

If the string text is wider than width, returns an elided version of the string (i.e., a string with "..." in it). Otherwise, returns the original string.

The mode parameter specifies whether the text is elided on the left (e.g., "...tech"), in the middle (e.g., "Tr...ch"), or on the right (e.g., "Trol...").

The width is specified in pixels, not characters.

The flags argument is optional and currently only supports Qt::TextShowMnemonic as value.

The elide mark will follow the layout direction; it will be on the right side of the text for right-to-left layouts, and on the left side for right-to-left layouts. Note that this behavior is independent of the text language.

This function was introduced in Qt 4.2.

int QFontMetrics::height () const

Returns the height of the font.

This is always equal to ascent()+descent()+1 (the 1 is for the base line).

See also leading() and lineSpacing().

bool QFontMetrics::inFont ( QChar ch ) const

Returns true if character ch is a valid character in the font; otherwise returns false.

int QFontMetrics::leading () const

Returns the leading of the font.

This is the natural inter-line spacing.

See also height() and lineSpacing().

int QFontMetrics::leftBearing ( QChar ch ) const

Returns the left bearing of character ch in the font.

The left bearing is the right-ward distance of the left-most pixel of the character from the logical origin of the character. This value is negative if the pixels of the character extend to the left of the logical origin.

See width(QChar) for a graphical description of this metric.

See also rightBearing(), minLeftBearing(), and width().

int QFontMetrics::lineSpacing () const

Returns the distance from one base line to the next.

This value is always equal to leading()+height().

See also height() and leading().

int QFontMetrics::lineWidth () const

Returns the width of the underline and strikeout lines, adjusted for the point size of the font.

See also underlinePos(), overlinePos(), and strikeOutPos().

int QFontMetrics::maxWidth () const

Returns the width of the widest character in the font.

int QFontMetrics::minLeftBearing () const

Returns the minimum left bearing of the font.

This is the smallest leftBearing(char) of all characters in the font.

Note that this function can be very slow if the font is large.

See also minRightBearing() and leftBearing().

int QFontMetrics::minRightBearing () const

Returns the minimum right bearing of the font.

This is the smallest rightBearing(char) of all characters in the font.

Note that this function can be very slow if the font is large.

See also minLeftBearing() and rightBearing().

int QFontMetrics::overlinePos () const

Returns the distance from the base line to where an overline should be drawn.

See also underlinePos(), strikeOutPos(), and lineWidth().

int QFontMetrics::rightBearing ( QChar ch ) const

Returns the right bearing of character ch in the font.

The right bearing is the left-ward distance of the right-most pixel of the character from the logical origin of a subsequent character. This value is negative if the pixels of the character extend to the right of the width() of the character.

See width() for a graphical description of this metric.

See also leftBearing(), minRightBearing(), and width().

QSize QFontMetrics::size ( int flags, const QString & text, int tabStops = 0, int * tabArray = 0 ) const

Returns the size in pixels of text.

The flags argument is the bitwise OR of the following flags:

• Qt::TextSingleLine ignores newline characters.
• Qt::TextExpandTabs expands tabs (see below)
• Qt::TextShowMnemonic interprets "&x" as x; i.e., underlined.
• Qt::TextWordBreak breaks the text to fit the rectangle.

If Qt::TextExpandTabs is set in flags, then: if tabArray is non-null, it specifies a 0-terminated sequence of pixel-positions for tabs; otherwise if tabStops is non-zero, it is used as the tab spacing (in pixels).

Newline characters are processed as linebreaks.

Despite the different actual character heights, the heights of the bounding rectangles of "Yes" and "yes" are the same.

See also boundingRect().

int QFontMetrics::strikeOutPos () const

Returns the distance from the base line to where the strikeout line should be drawn.

See also underlinePos(), overlinePos(), and lineWidth().

QRect QFontMetrics::tightBoundingRect ( const QString & text ) const

Returns a tight bounding rectangle around the characters in the string specified by text. The bounding rectangle always covers at least the set of pixels the text would cover if drawn at (0, 0).

Note that the bounding rectangle may extend to the left of (0, 0), e.g. for italicized fonts, and that the width of the returned rectangle might be different than what the width() method returns.

If you want to know the advance width of the string (to layout a set of strings next to each other), use width() instead.

Newline characters are processed as normal characters, not as linebreaks.

Warning: Calling this method is very slow on Windows.

This function was introduced in Qt 4.3.

See also width(), height(), and boundingRect().

int QFontMetrics::underlinePos () const

Returns the distance from the base line to where an underscore should be drawn.

See also overlinePos(), strikeOutPos(), and lineWidth().

int QFontMetrics::width ( const QString & text, int len = -1 ) const

Returns the width in pixels of the first len characters of text. If len is negative (the default), the entire string is used.

Note that this value is not equal to boundingRect().width(); boundingRect() returns a rectangle describing the pixels this string will cover whereas width() returns the distance to where the next string should be drawn.

See also boundingRect().

int QFontMetrics::width ( QChar ch ) const

This is an overloaded function.

Returns the logical width of character ch in pixels. This is a distance appropriate for drawing a subsequent character after ch.

Some of the metrics are described in the image to the right. The central dark rectangles cover the logical width() of each character. The outer pale rectangles cover the leftBearing() and rightBearing() of each character. Notice that the bearings of "f" in this particular font are both negative, while the bearings of "o" are both positive.

Warning: This function will produce incorrect results for Arabic characters or non-spacing marks in the middle of a string, as the glyph shaping and positioning of marks that happens when processing strings cannot be taken into account. When implementing an interactive text control, use QTextLayout instead.

See also boundingRect().

int QFontMetrics::xHeight () const

Returns the 'x' height of the font. This is often but not always the same as the height of the character 'x'.

bool QFontMetrics::operator!= ( const QFontMetrics & other )

Returns true if other is not equal to this object; otherwise returns false.

Two font metrics are considered equal if they were constructed from the same QFont and the paint devices they were constructed for are considered compatible.

See also operator==().

bool QFontMetrics::operator!= ( const QFontMetrics & other ) const

Returns true if other is not equal to this object; otherwise returns false.

Two font metrics are considered equal if they were constructed from the same QFont and the paint devices they were constructed for are considered compatible.

See also operator==().

QFontMetrics & QFontMetrics::operator= ( const QFontMetrics & fm )

Assigns the font metrics fm.

bool QFontMetrics::operator== ( const QFontMetrics & other )

Returns true if other is equal to this object; otherwise returns false.

Two font metrics are considered equal if they were constructed from the same QFont and the paint devices they were constructed for are considered compatible.

See also operator!=().

bool QFontMetrics::operator== ( const QFontMetrics & other ) const

This is an overloaded function.

Returns true if other is equal to this object; otherwise returns false.

Two font metrics are considered equal if they were constructed from the same QFont and the paint devices they were constructed for are considered compatible.

See also operator!=().