/****************************************************************************
**
** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the examples of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** You may use this file under the terms of the BSD license as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
** * Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** * Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in
** the documentation and/or other materials provided with the
** distribution.
** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
** the names of its contributors may be used to endorse or promote
** products derived from this software without specific prior written
** permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
** $QT_END_LICENSE$
**
****************************************************************************/#include "spectrumanalyser.h"#include "utils.h"#include <QtCore/qmath.h>#include <QtCore/qmetatype.h>#include <QtMultimedia/QAudioFormat>#include <QThread>#include "fftreal_wrapper.h"
SpectrumAnalyserThread::SpectrumAnalyserThread(QObject*parent)
: QObject(parent)
#ifndef DISABLE_FFT, m_fft(new FFTRealWrapper)
#endif, m_numSamples(SpectrumLengthSamples)
, m_windowFunction(DefaultWindowFunction)
, m_window(SpectrumLengthSamples,0.0)
, m_input(SpectrumLengthSamples,0.0)
, m_output(SpectrumLengthSamples,0.0)
, m_spectrum(SpectrumLengthSamples)
#ifdef SPECTRUM_ANALYSER_SEPARATE_THREAD, m_thread(newQThread(this))
#endif
{
#ifdef SPECTRUM_ANALYSER_SEPARATE_THREAD// moveToThread() cannot be called on a QObject with a parent
setParent(0);
moveToThread(m_thread);
m_thread->start();
#endif
calculateWindow();
}
SpectrumAnalyserThread::~SpectrumAnalyserThread()
{
#ifndef DISABLE_FFTdelete m_fft;
#endif
}
void SpectrumAnalyserThread::setWindowFunction(WindowFunction type)
{
m_windowFunction = type;
calculateWindow();
}
void SpectrumAnalyserThread::calculateWindow()
{
for (int i=0; i<m_numSamples; ++i) {
DataType x =0.0;
switch (m_windowFunction) {
case NoWindow:
x =1.0;
break;
case HannWindow:
x =0.5* (1-qCos((2* M_PI * i) / (m_numSamples -1)));
break;
default:
Q_ASSERT(false);
}
m_window[i]= x;
}
}
void SpectrumAnalyserThread::calculateSpectrum(constQByteArray&buffer,int inputFrequency,int bytesPerSample)
{
#ifndef DISABLE_FFT
Q_ASSERT(buffer.size() == m_numSamples * bytesPerSample);
// Initialize data arrayconstchar*ptr = buffer.constData();
for (int i=0; i<m_numSamples; ++i) {
constqint16 pcmSample =*reinterpret_cast<constqint16*>(ptr);
// Scale down to range [-1.0, 1.0]const DataType realSample = pcmToReal(pcmSample);
const DataType windowedSample = realSample * m_window[i];
m_input[i]= windowedSample;
ptr += bytesPerSample;
}
// Calculate the FFT
m_fft->calculateFFT(m_output.data(), m_input.data());
// Analyze output to obtain amplitude and phase for each frequencyfor (int i=2; i<=m_numSamples/2; ++i) {
// Calculate frequency of this complex sample
m_spectrum[i].frequency =qreal(i * inputFrequency) / (m_numSamples);
constqreal real = m_output[i];
qreal imag =0.0;
if (i>0&& i<m_numSamples/2)
imag = m_output[m_numSamples/2+ i];
constqreal magnitude = sqrt(real*real + imag*imag);
qreal amplitude = SpectrumAnalyserMultiplier * log(magnitude);
// Bound amplitude to [0.0, 1.0]
m_spectrum[i].clipped = (amplitude >1.0);
amplitude =qMax(qreal(0.0), amplitude);
amplitude =qMin(qreal(1.0), amplitude);
m_spectrum[i].amplitude = amplitude;
}
#endifemit calculationComplete(m_spectrum);
}
//=============================================================================// SpectrumAnalyser//=============================================================================
SpectrumAnalyser::SpectrumAnalyser(QObject*parent)
: QObject(parent)
, m_thread(new SpectrumAnalyserThread(this))
, m_state(Idle)
#ifdef DUMP_SPECTRUMANALYSER, m_count(0)
#endif
{
CHECKED_CONNECT(m_thread, SIGNAL(calculationComplete(FrequencySpectrum)),this, SLOT(calculationComplete(FrequencySpectrum)));
}
SpectrumAnalyser::~SpectrumAnalyser()
{
}
#ifdef DUMP_SPECTRUMANALYSERvoid SpectrumAnalyser::setOutputPath(constQString&outputDir)
{
m_outputDir.setPath(outputDir);
m_textFile.setFileName(m_outputDir.filePath("spectrum.txt"));
m_textFile.open(QIODevice::WriteOnly |QIODevice::Text);
m_textStream.setDevice(&m_textFile);
}
#endif//-----------------------------------------------------------------------------// Public functions//-----------------------------------------------------------------------------void SpectrumAnalyser::setWindowFunction(WindowFunction type)
{
constbool b =QMetaObject::invokeMethod(m_thread,"setWindowFunction",Qt::AutoConnection,
Q_ARG(WindowFunction, type));
Q_ASSERT(b);
Q_UNUSED(b) // suppress warnings in release builds
}
void SpectrumAnalyser::calculate(constQByteArray&buffer,constQAudioFormat&format)
{
// QThread::currentThread is marked 'for internal use only', but// we're only using it for debug output here, so it's probably OK :)
SPECTRUMANALYSER_DEBUG <<"SpectrumAnalyser::calculate"<<QThread::currentThread()
<<"state"<< m_state;
if (isReady()) {
Q_ASSERT(isPCMS16LE(format));
constint bytesPerSample = format.sampleSize() * format.channels() /8;
#ifdef DUMP_SPECTRUMANALYSER
m_count++;
constQString pcmFileName = m_outputDir.filePath(QString("spectrum_%1.pcm").arg(m_count,4,10,QChar('0')));
QFile pcmFile(pcmFileName);
pcmFile.open(QIODevice::WriteOnly);
constint bufferLength = m_numSamples * bytesPerSample;
pcmFile.write(buffer, bufferLength);
m_textStream <<"TimeDomain "<< m_count <<"\n";
constqint16* input =reinterpret_cast<constqint16*>(buffer);
for (int i=0; i<m_numSamples; ++i) {
m_textStream << i <<"\t"<<*input <<"\n";
input += format.channels();
}
#endif
m_state = Busy;
// Invoke SpectrumAnalyserThread::calculateSpectrum using QMetaObject. If// m_thread is in a different thread from the current thread, the// calculation will be done in the child thread.// Once the calculation is finished, a calculationChanged signal will be// emitted by m_thread.constbool b =QMetaObject::invokeMethod(m_thread,"calculateSpectrum",Qt::AutoConnection,
Q_ARG(QByteArray, buffer),
Q_ARG(int, format.frequency()),
Q_ARG(int, bytesPerSample));
Q_ASSERT(b);
Q_UNUSED(b) // suppress warnings in release builds#ifdef DUMP_SPECTRUMANALYSER
m_textStream <<"FrequencySpectrum "<< m_count <<"\n";
FrequencySpectrum::const_iterator x = m_spectrum.begin();
for (int i=0; i<m_numSamples; ++i,++x)
m_textStream << i <<"\t"<< x->frequency <<"\t"<< x->amplitude<<"\t"<< x->phase <<"\n";
#endif
}
}
bool SpectrumAnalyser::isReady() const
{
return (Idle == m_state);
}
void SpectrumAnalyser::cancelCalculation()
{
if (Busy == m_state)
m_state = Cancelled;
}
//-----------------------------------------------------------------------------// Private slots//-----------------------------------------------------------------------------void SpectrumAnalyser::calculationComplete(const FrequencySpectrum &spectrum)
{
Q_ASSERT(Idle != m_state);
if (Busy == m_state)
emit spectrumChanged(spectrum);
m_state = Idle;
}
Cette page est une traduction d'une page de la documentation de Qt, écrite par Nokia Corporation and/or its subsidiary(-ies). Les éventuels problèmes résultant d'une mauvaise traduction ne sont pas imputables à Nokia.
Vous avez déniché une erreur ? Un bug ? Une redirection cassée ? Ou tout autre problème, quel qu'il soit ? Ou bien vous désirez participer à ce projet de traduction ? N'hésitez pas à nous contacter
ou par MP !