glwidget.cpp Example File

 /****************************************************************************
 **
 ** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
 ** All rights reserved.
 ** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the examples of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:BSD$
 ** You may use this file under the terms of the BSD license as follows:
 **
 ** "Redistribution and use in source and binary forms, with or without
 ** modification, are permitted provided that the following conditions are
 ** met:
 **   * Redistributions of source code must retain the above copyright
 **     notice, this list of conditions and the following disclaimer.
 **   * Redistributions in binary form must reproduce the above copyright
 **     notice, this list of conditions and the following disclaimer in
 **     the documentation and/or other materials provided with the
 **     distribution.
 **   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
 **     the names of its contributors may be used to endorse or promote
 **     products derived from this software without specific prior written
 **     permission.
 **
 ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/

 #include <QtGui>
 #include <QtOpenGL>

 #include <math.h>

 #include "glwidget.h"

 GLWidget::GLWidget(QWidget *parent)
     : QGLWidget(parent)
 {
     gear1 = 0;
     gear2 = 0;
     gear3 = 0;
     xRot = 0;
     yRot = 0;
     zRot = 0;
     gear1Rot = 0;

     QTimer *timer = new QTimer(this);
     connect(timer, SIGNAL(timeout()), this, SLOT(advanceGears()));
     timer->start(20);
 }

 GLWidget::~GLWidget()
 {
     makeCurrent();
     glDeleteLists(gear1, 1);
     glDeleteLists(gear2, 1);
     glDeleteLists(gear3, 1);
 }

 void GLWidget::setXRotation(int angle)
 {
     normalizeAngle(&angle);
     if (angle != xRot) {
         xRot = angle;
         emit xRotationChanged(angle);
         updateGL();
     }
 }

 void GLWidget::setYRotation(int angle)
 {
     normalizeAngle(&angle);
     if (angle != yRot) {
         yRot = angle;
         emit yRotationChanged(angle);
         updateGL();
     }
 }

 void GLWidget::setZRotation(int angle)
 {
     normalizeAngle(&angle);
     if (angle != zRot) {
         zRot = angle;
         emit zRotationChanged(angle);
         updateGL();
     }
 }

 void GLWidget::initializeGL()
 {
     static const GLfloat lightPos[4] = { 5.0f, 5.0f, 10.0f, 1.0f };
     static const GLfloat reflectance1[4] = { 0.8f, 0.1f, 0.0f, 1.0f };
     static const GLfloat reflectance2[4] = { 0.0f, 0.8f, 0.2f, 1.0f };
     static const GLfloat reflectance3[4] = { 0.2f, 0.2f, 1.0f, 1.0f };

     glLightfv(GL_LIGHT0, GL_POSITION, lightPos);
     glEnable(GL_LIGHTING);
     glEnable(GL_LIGHT0);
     glEnable(GL_DEPTH_TEST);

     gear1 = makeGear(reflectance1, 1.0, 4.0, 1.0, 0.7, 20);
     gear2 = makeGear(reflectance2, 0.5, 2.0, 2.0, 0.7, 10);
     gear3 = makeGear(reflectance3, 1.3, 2.0, 0.5, 0.7, 10);

     glEnable(GL_NORMALIZE);
     glClearColor(0.0f, 0.0f, 0.0f, 1.0f);
 }

 void GLWidget::paintGL()
 {
     glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);

     glPushMatrix();
     glRotated(xRot / 16.0, 1.0, 0.0, 0.0);
     glRotated(yRot / 16.0, 0.0, 1.0, 0.0);
     glRotated(zRot / 16.0, 0.0, 0.0, 1.0);

     drawGear(gear1, -3.0, -2.0, 0.0, gear1Rot / 16.0);
     drawGear(gear2, +3.1, -2.0, 0.0, -2.0 * (gear1Rot / 16.0) - 9.0);

     glRotated(+90.0, 1.0, 0.0, 0.0);
     drawGear(gear3, -3.1, -1.8, -2.2, +2.0 * (gear1Rot / 16.0) - 2.0);

     glPopMatrix();
 }

 void GLWidget::resizeGL(int width, int height)
 {
     int side = qMin(width, height);
     glViewport((width - side) / 2, (height - side) / 2, side, side);

     glMatrixMode(GL_PROJECTION);
     glLoadIdentity();
     glFrustum(-1.0, +1.0, -1.0, 1.0, 5.0, 60.0);
     glMatrixMode(GL_MODELVIEW);
     glLoadIdentity();
     glTranslated(0.0, 0.0, -40.0);
 }

 void GLWidget::mousePressEvent(QMouseEvent *event)
 {
     lastPos = event->pos();
 }

 void GLWidget::mouseMoveEvent(QMouseEvent *event)
 {
     int dx = event->x() - lastPos.x();
     int dy = event->y() - lastPos.y();

     if (event->buttons() & Qt::LeftButton) {
         setXRotation(xRot + 8 * dy);
         setYRotation(yRot + 8 * dx);
     } else if (event->buttons() & Qt::RightButton) {
         setXRotation(xRot + 8 * dy);
         setZRotation(zRot + 8 * dx);
     }
     lastPos = event->pos();
 }

 void GLWidget::advanceGears()
 {
     gear1Rot += 2 * 16;
     updateGL();
 }

 GLuint GLWidget::makeGear(const GLfloat *reflectance, GLdouble innerRadius,
                           GLdouble outerRadius, GLdouble thickness,
                           GLdouble toothSize, GLint toothCount)
 {
     const double Pi = 3.14159265358979323846;

     GLuint list = glGenLists(1);
     glNewList(list, GL_COMPILE);
     glMaterialfv(GL_FRONT, GL_AMBIENT_AND_DIFFUSE, reflectance);

     GLdouble r0 = innerRadius;
     GLdouble r1 = outerRadius - toothSize / 2.0;
     GLdouble r2 = outerRadius + toothSize / 2.0;
     GLdouble delta = (2.0 * Pi / toothCount) / 4.0;
     GLdouble z = thickness / 2.0;
     int i, j;

     glShadeModel(GL_FLAT);

     for (i = 0; i < 2; ++i) {
         GLdouble sign = (i == 0) ? +1.0 : -1.0;

         glNormal3d(0.0, 0.0, sign);

         glBegin(GL_QUAD_STRIP);
         for (j = 0; j <= toothCount; ++j) {
             GLdouble angle = 2.0 * Pi * j / toothCount;
             glVertex3d(r0 * cos(angle), r0 * sin(angle), sign * z);
             glVertex3d(r1 * cos(angle), r1 * sin(angle), sign * z);
             glVertex3d(r0 * cos(angle), r0 * sin(angle), sign * z);
             glVertex3d(r1 * cos(angle + 3 * delta), r1 * sin(angle + 3 * delta),
                        sign * z);
         }
         glEnd();

         glBegin(GL_QUADS);
         for (j = 0; j < toothCount; ++j) {
             GLdouble angle = 2.0 * Pi * j / toothCount;
             glVertex3d(r1 * cos(angle), r1 * sin(angle), sign * z);
             glVertex3d(r2 * cos(angle + delta), r2 * sin(angle + delta),
                        sign * z);
             glVertex3d(r2 * cos(angle + 2 * delta), r2 * sin(angle + 2 * delta),
                        sign * z);
             glVertex3d(r1 * cos(angle + 3 * delta), r1 * sin(angle + 3 * delta),
                        sign * z);
         }
         glEnd();
     }

     glBegin(GL_QUAD_STRIP);
     for (i = 0; i < toothCount; ++i) {
         for (j = 0; j < 2; ++j) {
             GLdouble angle = 2.0 * Pi * (i + (j / 2.0)) / toothCount;
             GLdouble s1 = r1;
             GLdouble s2 = r2;
             if (j == 1)
                 qSwap(s1, s2);

             glNormal3d(cos(angle), sin(angle), 0.0);
             glVertex3d(s1 * cos(angle), s1 * sin(angle), +z);
             glVertex3d(s1 * cos(angle), s1 * sin(angle), -z);

             glNormal3d(s2 * sin(angle + delta) - s1 * sin(angle),
                        s1 * cos(angle) - s2 * cos(angle + delta), 0.0);
             glVertex3d(s2 * cos(angle + delta), s2 * sin(angle + delta), +z);
             glVertex3d(s2 * cos(angle + delta), s2 * sin(angle + delta), -z);
         }
     }
     glVertex3d(r1, 0.0, +z);
     glVertex3d(r1, 0.0, -z);
     glEnd();

     glShadeModel(GL_SMOOTH);

     glBegin(GL_QUAD_STRIP);
     for (i = 0; i <= toothCount; ++i) {
         GLdouble angle = i * 2.0 * Pi / toothCount;
         glNormal3d(-cos(angle), -sin(angle), 0.0);
         glVertex3d(r0 * cos(angle), r0 * sin(angle), +z);
         glVertex3d(r0 * cos(angle), r0 * sin(angle), -z);
     }
     glEnd();

     glEndList();

     return list;
 }

 void GLWidget::drawGear(GLuint gear, GLdouble dx, GLdouble dy, GLdouble dz,
                         GLdouble angle)
 {
     glPushMatrix();
     glTranslated(dx, dy, dz);
     glRotated(angle, 0.0, 0.0, 1.0);
     glCallList(gear);
     glPopMatrix();
 }

 void GLWidget::normalizeAngle(int *angle)
 {
     while (*angle < 0)
         *angle += 360 * 16;
     while (*angle > 360 * 16)
         *angle -= 360 * 16;
 }