Member Function Documentation
QGeoRoutingManagerEngine::QGeoRoutingManagerEngine ( const QMap<QString, QVariant> & parameters, QObject * parent = 0 )
Constructs a new engine with the specified parent, using parameters to pass any implementation specific data to the engine.
QGeoRoutingManagerEngine::~QGeoRoutingManagerEngine () [virtual]
Destroys this engine.
QGeoRouteReply * QGeoRoutingManagerEngine::calculateRoute ( const QGeoRouteRequest & request ) [pure virtual]
Begins the calculation of the route specified by request.
A QGeoRouteReply object will be returned, which can be used to manage the routing operation and to return the results of the operation.
This engine and the returned QGeoRouteReply object will emit signals indicating if the operation completes or if errors occur.
Once the operation has completed, QGeoRouteReply::routes can be used to retrieve the calculated route or routes.
If request includes features which are not supported by this engine, as reported by the methods in this engine, then a QGeoRouteReply::UnsupportedOptionError will occur.
The user is responsible for deleting the returned reply object, although this can be done in the slot connected to QGeoRoutingManagerEngine::finished(), QGeoRoutingManagerEngine::error(), QGeoRouteReply::finished() or QGeoRouteReply::error() with deleteLater().
void QGeoRoutingManagerEngine::error ( QGeoRouteReply * reply, QGeoRouteReply::Error error, QString errorString = QString() ) [signal]
This signal is emitted when an error has been detected in the processing of reply. The QGeoRoutingManagerEngine::finished() signal will probably follow.
The error will be described by the error code error. If errorString is not empty it will contain a textual description of the error.
This signal and QGeoRouteReply::error() will be emitted at the same time.
Note: Do no delete the reply object in the slot connected to this signal. Use deleteLater() instead.
void QGeoRoutingManagerEngine::finished ( QGeoRouteReply * reply ) [signal]
This signal is emitted when reply has finished processing.
If reply::error() equals QGeoRouteReply::NoError then the processing finished successfully.
This signal and QGeoRouteReply::finished() will be emitted at the same time.
Note: Do no delete the reply object in the slot connected to this signal. Use deleteLater() instead.
QLocale QGeoRoutingManagerEngine::locale () const
Returns the locale used to hint to this routing manager about what language to use for addresses and instructions.
See also setLocale().
QString QGeoRoutingManagerEngine::managerName () const
Returns the name which this engine implementation uses to distinguish itself from the implementations provided by other plugins.
The combination of managerName() and managerVersion() should be unique amongst plugin implementations.
int QGeoRoutingManagerEngine::managerVersion () const
Returns the version of this engine implementation.
The combination of managerName() and managerVersion() should be unique amongst plugin implementations.
void QGeoRoutingManagerEngine::setLocale ( const QLocale & locale )
Sets the locale to be used by the this manager to locale.
If this routing manager supports returning addresses and instructions in different languages, they will be returned in the language of locale.
The locale used defaults to the system locale if this is not set.
See also locale().
void QGeoRoutingManagerEngine::setSupportedFeatureTypes ( QGeoRouteRequest::FeatureTypes featureTypes ) [protected]
Sets the types of features that this engine can take into account during route planning to featureTypes.
It is important that subclasses use this method to ensure that the engine reports its capabilities correctly. If this function is not used the engine will report that it supports no feature types at all.
See also supportedFeatureTypes().
void QGeoRoutingManagerEngine::setSupportedFeatureWeights ( QGeoRouteRequest::FeatureWeights featureWeights ) [protected]
Sets the weightings which this engine can apply to different features during route planning to featureWeights.
It is important that subclasses use this method to ensure that the engine reports its capabilities correctly. If this function is not used the engine will report that it supports no feaure weights at all.
See also supportedFeatureWeights().
void QGeoRoutingManagerEngine::setSupportedManeuverDetails ( QGeoRouteRequest::ManeuverDetails maneuverDetails ) [protected]
Sets the levels of detail for navigation manuevers which can be requested by this engine to maneuverDetails.
It is important that subclasses use this method to ensure that the engine reports its capabilities correctly. If this function is not used the engine will report that it supports no maneuver details at all.
See also supportedManeuverDetails().
void QGeoRoutingManagerEngine::setSupportedRouteOptimizations ( QGeoRouteRequest::RouteOptimizations optimizations ) [protected]
Sets the route optimizations supported by this engine to optimizations.
It is important that subclasses use this method to ensure that the engine reports its capabilities correctly. If this function is not used the engine will report that it supports no route optimizations at all.
See also supportedRouteOptimizations().
void QGeoRoutingManagerEngine::setSupportedSegmentDetails ( QGeoRouteRequest::SegmentDetails segmentDetails ) [protected]
Sets the levels of detail for routing segments which can be requested by this engine to segmentDetails.
It is important that subclasses use this method to ensure that the engine reports its capabilities correctly. If this function is not used the engine will report that it supports no segment detail at all.
See also supportedSegmentDetails().
void QGeoRoutingManagerEngine::setSupportedTravelModes ( QGeoRouteRequest::TravelModes travelModes ) [protected]
Sets the travel modes supported by this engine to travelModes.
It is important that subclasses use this method to ensure that the engine reports its capabilities correctly. If this function is not used the engine will report that it supports no travel modes at all.
See also supportedTravelModes().
void QGeoRoutingManagerEngine::setSupportsAlternativeRoutes ( bool supported ) [protected]
Sets whether this engine supports request for alternative routes to supported.
It is important that subclasses use this method to ensure that the engine reports its capabilities correctly. If this function is not used the engine will report that it does not support alternative routes.
See also supportsAlternativeRoutes().
void QGeoRoutingManagerEngine::setSupportsExcludeAreas ( bool supported ) [protected]
Sets whether this engine supports request for excluding areas from routes to supported.
It is important that subclasses use this method to ensure that the engine reports its capabilities correctly. If this function is not used the engine will report that it does not support excluding areas.
See also supportsExcludeAreas().
void QGeoRoutingManagerEngine::setSupportsRouteUpdates ( bool supported ) [protected]
Sets whether this engine supports updating routes to supported.
It is important that subclasses use this method to ensure that the engine reports its capabilities correctly. If this function is not used the engine will report that it does not support updating routes.
See also supportsRouteUpdates().
Returns the types of features that this engine can take into account during route planning.
See also setSupportedFeatureTypes().
Returns the weightings which this engine can apply to different features during route planning.
See also setSupportedFeatureWeights().
Returns the levels of detail for navigation maneuvers which can be requested by this engine.
See also setSupportedManeuverDetails().
Returns the route optimizations supported by this engine.
See also setSupportedRouteOptimizations().
Returns the levels of detail for routing segments which can be requested by this engine.
See also setSupportedSegmentDetails().
Returns the travel modes supported by this engine.
See also setSupportedTravelModes().
bool QGeoRoutingManagerEngine::supportsAlternativeRoutes () const
Returns whether this engine supports request for alternative routes.
See also setSupportsAlternativeRoutes().
bool QGeoRoutingManagerEngine::supportsExcludeAreas () const
Returns whether this engine supports the exclusion of areas from routes.
See also setSupportsExcludeAreas().
bool QGeoRoutingManagerEngine::supportsRouteUpdates () const
Returns whether this engine supports updating routes.
See also setSupportsRouteUpdates().
QGeoRouteReply * QGeoRoutingManagerEngine::updateRoute ( const QGeoRoute & route, const QGeoCoordinate & position ) [virtual]
Begins the process of updating route based on the current position position.
A QGeoRouteReply object will be returned, which can be used to manage the routing operation and to return the results of the operation.
This engine and the returned QGeoRouteReply object will emit signals indicating if the operation completes or if errors occur.
If supportsRouteUpdates() returns false an QGeoRouteReply::UnsupportedOptionError will occur.
Once the operation has completed, QGeoRouteReply::routes can be used to retrieve the updated route.
The returned route could be entirely different to the original route, especially if position is far enough away from the initial route. Otherwise the route will be similar, although the remaining time and distance will be updated and any segments of the original route which have been traversed will be removed.
The user is responsible for deleting the returned reply object, although this can be done in the slot connected to QGeoRoutingManagerEngine::finished(), QGeoRoutingManagerEngine::error(), QGeoRouteReply::finished() or QGeoRouteReply::error() with deleteLater().
