QMagnetometerReading Class ReferenceThe QMagnetometerReading class represents one reading from the magnetometer. More... #include <QMagnetometerReading> Inherits QSensorReading. Properties
Public Functions
Additional Inherited Members
Detailed DescriptionThe QMagnetometerReading class represents one reading from the magnetometer. QMagnetometerReading UnitsThe magnetometer returns magnetic flux density values along 3 axes. The scale of the values is teslas. The axes are arranged as follows. The magnetometer can report on either raw magnetic flux values or geomagnetic flux values. By default it returns raw magnetic flux values. The QMagnetometer::returnGeoValues property must be set to return geomagnetic flux values. The primary difference between raw and geomagnetic values is that extra processing is done to eliminate local magnetic interference from the geomagnetic values so they represent only the effect of the Earth's magnetic field. This process is not perfect and the accuracy of each reading may change. The image below shows the difference between geomagnetic (on the left) and raw (on the right) readings for a phone that is being subjected to magnetic interference. The accuracy of each reading is measured as a number from 0 to 1. A value of 1 is the highest level that the device can support and 0 is the worst. Property Documentation
|
qreal | calibrationLevel () const |
See also QMagnetometerReading Units.
This property holds the raw magnetic flux density on the X axis.
Measured as telsas.
Access functions:
qreal | x () const |
See also QMagnetometerReading Units.
This property holds the raw magnetic flux density on the Y axis.
Measured as telsas.
Access functions:
qreal | y () const |
See also QMagnetometerReading Units.
This property holds the raw magnetic flux density on the Z axis.
Measured as telsas.
Access functions:
qreal | z () const |
See also QMagnetometerReading Units.
Sets the accuracy of the reading to calibrationLevel.
See also calibrationLevel().
Sets the raw magnetic flux density on the X axis to x.
See also x().
Sets the raw magnetic flux density on the Y axis to y.
See also y().
Sets the raw magnetic flux density on the Z axis to z.
See also z().
© 2008-2010 Nokia Corporation and/or its subsidiaries. Nokia, Qt and their respective logos are trademarks of Nokia Corporation in Finland and/or other countries worldwide.
All other trademarks are property of their respective owners. Privacy Policy