QGridLayout Class Reference
The QGridLayout class lays out widgets in a grid.
More...
#include <qlayout.h>
Inherits QLayout.
List of all member functions.
Public Members
Protected Members
boolÂ
findWidget ( QWidget * w, int * r, int * c )Â
voidÂ
add ( QLayoutItem *, int row, int col )Â
Detailed Description
The QGridLayout class lays out widgets in a grid.
QGridLayout takes the space it gets (from its parent layout or from
the mainWidget()), divides it up into rows and columns, and puts
each of the widgets it manages into the correct cell(s).
Columns and rows behave identically; we will discuss columns but
there are equivalent functions for rows.
Each column has a minimum width and a stretch factor. The minimum
width is the greatest of that set using addColSpacing() and the
minimum width of each widget in that column. The stretch factor is
set using setColStretch() and determines how much of the available
space the column will get, over and above its necessary minimum.
Normally, each managed widget or layout is put into a cell of its
own using addWidget(), addLayout(), or by the auto-add facility, but you can also put widget
into multiple cells using addMultiCellWidget(). If you do that,
QGridLayout will make a guess at how to distribute the size over the
columns/rows (based on the stretch factors). You can adjust the
minimum width of each column/row using addColSpacing()/addRowSpacing().
This illustration shows a fragment of a dialog with a five-column,
three-row grid (the grid is shown overlaid in magenta):
Columns 0, 2 and 4 in this dialog fragment are made up of a QLabel,
a QLineEdit and a QListBox. Columns 1 and 2 are placeholders, made
with addColSpacing(). Row 0 consists of three QLabel objects, row 1
of three QLineEdit objects and row 2 of three QListBox objects.
Since we did not want any space between the rows, we had to use
placeholder columns to get the right amount of space between the
columns.
Note that the columns and rows are not equally wide/tall: If you
want two columns to be equally wide, you must set the columns'
minimum widths and stretch factors to be the same yourself. You do
this using addColSpacing() and setStretch().
If the QGridLayout is not the top-level layout (ie. is not managing
all of the widget's area and children), you must add it to its
parent layout when you have created it, but before you can do
anything with it. The normal way to add a layout is by calling
parentLayout->addLayout().
Once you have done that, you can start putting widgets and other
layouts in the cells of your grid layout using addWidget(),
addLayout() and addMultiCellWidget().
QGridLayout also includes two margin widths: The border width and
the inter-box width. The border width is the width of the reserved
space along each of the QGridLayout's four sides. The intra-widget
width is the width of the automatically allocated spacing between
neighbouring boxes.
The border width defaults to 0, and the intra-widget width defaults
to the same as the border width. Both are set using arguments to
the constructor.
See also the Layout Overview documentation.
Examples:
layout/layout.cpp
rot13/rot13.cpp
cursor/cursor.cpp
Member Function Documentation
QGridLayout::QGridLayout ( QLayout * parentLayout, int nRows = 1, int nCols = 1, int space = -1, const char * name=0 )
Constructs a new grid that is placed inside parentLayout,
with nRows rows and nCols columns,
If space is -1, this QGridLayout will inherits its parent's
spacing(), otherwise space is used.
This grid is placed according to parentLayout's default placement
rules.
QGridLayout::QGridLayout ( QWidget * parent, int nRows = 1, int nCols = 1, int border=0, int space = -1, const char * name=0 )
Constructs a new QGridLayout with nRows rows, nCols columns
and main widget parent. parent may not be 0.
border is the number of pixels between the edge of the widget and
the managed children. space is the default number of pixels
between cells. If space is -1 the value
of border is used.
name is the internal object name.
QGridLayout::QGridLayout ( int nRows = 1, int nCols = 1, int space = -1, const char * name=0 )
Constructs a new grid with nRows rows and nCols columns,
If space is -1, this QGridLayout will inherits its parent's
spacing(), otherwise space is used.
You have to insert this grid into another layout. You can insert
widgets and layouts in this layout at any time, but layout will not
be performed before it is inserted.
QGridLayout::~QGridLayout ()
Destructs the grid layout. Geometry management is terminated if
this is a top-level grid.
void QGridLayout::add ( QLayoutItem * item, int row, int col ) [protected]
Adds item at position row, col. The layout takes over ownership
of item.
void QGridLayout::addColSpacing ( int col, int minsize )
Sets the minimum width of col to minsize pixels.
void QGridLayout::addItem ( QLayoutItem * item ) [virtual]
Adds item to the next free position of this layout.
Reimplemented from QLayout.
void QGridLayout::addItem ( QLayoutItem * item, int row, int col )
Adds item at position row, col. The layout takes over ownership
of item.
void QGridLayout::addLayout ( QLayout * layout, int row, int col )
Places another layout at position (row, col) in the grid.
The top left position is (0,0).
void QGridLayout::addMultiCell ( QLayoutItem * item, int fromRow, int toRow, int fromCol, int toCol, int alignment = 0 )
Adds the item to the cell grid, spanning multiple rows/columns.
Alignment is specified by alignment which is a bitwise OR of
Qt::AlignmentFlags values.
The default alignment is 0, which means
that the widget fills the entire cell.
void QGridLayout::addMultiCellLayout ( QLayout * layout, int fromRow, int toRow, int fromCol, int toCol, int alignment = 0 )
Adds the layout w to the cell grid, spanning multiple rows/columns.
Alignment is specified by alignment which is a bitwise OR of
Qt::AlignmentFlags values.
The default alignment is 0, which means
that the widget fills the entire cell.
A non-zero alignment indicates that the layout should not grow to
fill the available space, but should be sized according to
sizeHint().
void QGridLayout::addMultiCellWidget ( QWidget * w, int fromRow, int toRow, int fromCol, int toCol, int alignment = 0 )
Adds the widget w to the cell grid, spanning multiple rows/columns.
Alignment is specified by alignment which is a bitwise OR of
Qt::AlignmentFlags values.
The default alignment is 0, which means
that the widget fills the entire cell.
A non-zero alignment indicates that the widget should not grow to
fill the available space, but should be sized according to
sizeHint().
Examples:
layout/layout.cpp
cursor/cursor.cpp
void QGridLayout::addRowSpacing ( int row, int minsize )
Sets the minimum height of row to minsize pixels.
void QGridLayout::addWidget ( QWidget * w, int row, int col, int alignment = 0 )
Adds the widget w to the cell grid at row, col.
The top left position is (0,0)
Alignment is specified by alignment which is a bitwise OR of
Qt::AlignmentFlags values.
The default alignment is 0, which means
that the widget fills the entire cell.
Note 1: You should not call this if you have enabled the
auto-add facility of the layout.
Note 2: The alignment parameter is interpreted more aggressively
than in previous versions of Qt. A non-default alignment now
indicates that the widget should not grow to fill the available
space, but should be sized according to sizeHint().
Examples:
layout/layout.cpp
rot13/rot13.cpp
cursor/cursor.cpp
QRect QGridLayout::cellGeometry ( int row, int col ) const
Returns the geometry of the cell with row row, and column
col in the grid. Returns an invalid rectangle if row or
col is outside the grid.
Warning: in the current version of Qt, this function does not return
valid results until setGeometry() has been called, ie. after the
mainWidget() is visible.
int QGridLayout::colStretch ( int col ) const
Returns the stretch factor for column col.
See also setColStretch().
void QGridLayout::expand ( int nRows, int nCols )
Expands this grid so that it will have nRows rows and nCols columns.
Will not shrink the grid. You should not need to call this function, as
QGridLayout expands automatically as new items are inserted.
QSizePolicy::ExpandData QGridLayout::expanding() const [virtual]
Returns the expansiveness of this layout.
Reimplemented from QLayoutItem.
bool QGridLayout::findWidget ( QWidget * w, int * row, int * col ) [protected]
Searches for w in this layout (not including child layouts). If
w is found, it sets row and col to the row and column and
returns TRUE. If w is not found, FALSE is returned.
Warning: If a widget spans multiple rows/columns, the top-left cell is returned.
bool QGridLayout::hasHeightForWidth () const [virtual]
Returns whether this layout's preferred height depends on its width.
Reimplemented from QLayoutItem.
int QGridLayout::heightForWidth ( int w ) const [virtual]
Returns the layout's preferred height when it is w pixels wide.
Reimplemented from QLayoutItem.
void QGridLayout::invalidate () [virtual]
Resets cached information.
Reimplemented from QLayoutItem.
QLayoutIterator QGridLayout::iterator () [virtual]
Reimplemented for internal reasons; the API is not affected.
Reimplemented from QLayoutItem.
QSize QGridLayout::maximumSize () const [virtual]
Returns the maximum size needed by this grid.
Reimplemented from QLayoutItem.
QSize QGridLayout::minimumSize () const [virtual]
Returns the minimum size needed by this grid.
Reimplemented from QLayoutItem.
int QGridLayout::numCols () const
Returns the number of columns in this grid.
int QGridLayout::numRows () const
Returns the number of rows in this grid.
int QGridLayout::rowStretch ( int row ) const
Returns the stretch factor for row row.
See also setRowStretch().
void QGridLayout::setColStretch ( int col, int stretch ) [virtual]
Sets the stretch factor of column col to stretch.
The first column is number 0.
The stretch factor is relative to the other columns in this grid.
Columns with higher stretch factor take more of the available space.
The default stretch factor is 0.
If the stretch factor is 0 and no other column in this table can
grow at all, the column may still grow.
See also colStretch(), addColSpacing() and setRowStretch().
Examples:
layout/layout.cpp
void QGridLayout::setGeometry ( const QRect & r ) [virtual]
Resizes managed widgets within the rectangle r.
Reimplemented from QLayoutItem.
void QGridLayout::setOrigin ( Corner c )
Sets which of the four corners of the grid corresponds to (0,0).
void QGridLayout::setRowStretch ( int row, int stretch ) [virtual]
Sets the stretch factor of row row to stretch.
The first row is number 0.
The stretch factor is relative to the other rows in this grid.
Rows with higher stretch factor take more of the available space.
The default stretch factor is 0.
If the stretch factor is 0 and no other row in this table can
grow at all, the row may still grow.
See also rowStretch(), addRowSpacing() and setColStretch().
QSize QGridLayout::sizeHint () const [virtual]
Returns the preferred size of this grid.
Reimplemented from QLayoutItem.
Search the documentation, FAQ, qt-interest archive and more (uses
www.trolltech.com):
This file is part of the Qt toolkit,
copyright © 1995-2005
Trolltech, all rights reserved.
