QVariant Class Reference
^{[QtCore module]}

Using canConvert() and convert() Consecutively

When using canConvert() and convert() consecutively, it is possible for canConvert() to return true, but convert() to return false. This is typically because canConvert() only reports the general ability of QVariant to convert between types given suitable data; it is still possible to supply data which cannot actually be converted.

For example, canConvert() would return true when called on a variant containing a string because, in principle, QVariant is able to convert strings of numbers to integers. However, if the string contains non-numeric characters, it cannot be converted to an integer, and any attempt to convert it will fail. Hence, it is important to have both functions return true for a successful conversion.

See also QMetaType.

Member Type Documentation

enum QVariant::Type

This enum type defines the types of variable that a QVariant can contain.

Member Function Documentation

QVariant::QVariant ()

Constructs an invalid variant.

QVariant::QVariant ( Type type )

Constructs a null variant of type type.

QVariant::QVariant ( int typeOrUserType, const void * copy )

Constructs variant of type typeOrUserType, and initializes with copy if copy is not 0.

Note that you have to pass the address of the variable you want stored.

Usually, you never have to use this constructor, use qVariantFromValue() instead to construct variants from the pointer types represented by QMetaType::VoidStar, QMetaType::QObjectStar and QMetaType::QWidgetStar.

See also qVariantFromValue() and Type.

QVariant::QVariant ( const QVariant & p )

Constructs a copy of the variant, p, passed as the argument to this constructor.

QVariant::QVariant ( QDataStream & s )

Reads the variant from the data stream, s.

QVariant::QVariant ( int val )

Constructs a new variant with an integer value, val.

QVariant::QVariant ( uint val )

Constructs a new variant with an unsigned integer value, val.

QVariant::QVariant ( qlonglong val )

Constructs a new variant with a long long integer value, val.

QVariant::QVariant ( qulonglong val )

Constructs a new variant with an unsigned long long integer value, val.

QVariant::QVariant ( bool val )

Constructs a new variant with a boolean value, val. The integer argument is a dummy, necessary for compatibility with some compilers.

QVariant::QVariant ( double val )

Constructs a new variant with a floating point value, val.

QVariant::QVariant ( const char * val )

Constructs a new variant with a string value of val. The variant creates a deep copy of val, using the encoding set by QTextCodec::setCodecForCStrings().

You can disable this operator by defining QT_NO_CAST_FROM_ASCII when you compile your applications.

See also QTextCodec::setCodecForCStrings().

QVariant::QVariant ( const QByteArray & val )

Constructs a new variant with a bytearray value, val.

QVariant::QVariant ( const QBitArray & val )

Constructs a new variant with a bitarray value, val.

QVariant::QVariant ( const QString & val )

Constructs a new variant with a string value, val.

QVariant::QVariant ( const QLatin1String & val )

Constructs a new variant with a string value, val.

QVariant::QVariant ( const QStringList & val )

Constructs a new variant with a string list value, val.

QVariant::QVariant ( const QChar & c )

Constructs a new variant with a char value, c.

QVariant::QVariant ( const QDate & val )

Constructs a new variant with a date value, val.

QVariant::QVariant ( const QTime & val )

Constructs a new variant with a time value, val.

QVariant::QVariant ( const QDateTime & val )

Constructs a new variant with a date/time value, val.

QVariant::QVariant ( const QList<QVariant> & val )

Constructs a new variant with a list value, val.

QVariant::QVariant ( const QMap<QString, QVariant> & val )

Constructs a new variant with a map of QVariants, val.

QVariant::QVariant ( const QSize & val )

Constructs a new variant with a size value of val.

QVariant::QVariant ( const QSizeF & val )

Constructs a new variant with a size value of val.

QVariant::QVariant ( const QPoint & val )

Constructs a new variant with a point value of val.

QVariant::QVariant ( const QPointF & val )

Constructs a new variant with a point value of val.

QVariant::QVariant ( const QLine & val )

Constructs a new variant with a line value of val.

QVariant::QVariant ( const QLineF & val )

Constructs a new variant with a line value of val.

QVariant::QVariant ( const QRect & val )

Constructs a new variant with a rect value of val.

QVariant::QVariant ( const QRectF & val )

Constructs a new variant with a rect value of val.

QVariant::QVariant ( const QUrl & val )

Constructs a new variant with a url value of val.

QVariant::QVariant ( const QLocale & l )

Constructs a new variant with a locale value, l.

QVariant::QVariant ( const QRegExp & regExp )

Constructs a new variant with the regexp value regExp.

QVariant::QVariant ( Qt::GlobalColor color )

Constructs a new variant of type QVariant::Color and initializes it with color.

This is a convenience constructor that allows QVariant(Qt::blue); to create a valid QVariant storing a QColor.

Note: This constructor will assert if the application does not link to the Qt GUI library.

This function was introduced in Qt 4.2.

QVariant::~QVariant ()

Destroys the QVariant and the contained object.

Note that subclasses that reimplement clear() should reimplement the destructor to call clear(). This destructor calls clear(), but because it is the destructor, QVariant::clear() is called rather than a subclass's clear().

bool QVariant::canConvert ( Type t ) const

Returns true if the variant's type can be cast to the requested type, t. Such casting is done automatically when calling the toInt(), toBool(), ... methods.

The following casts are done automatically:

See also convert().

bool QVariant::canConvert () const

This is an overloaded member function, provided for convenience.

Returns true if the variant can be converted to the template type T, otherwise false.

Example:

 QVariant v = 42;

 v.canConvert<int>();              // returns true
 v.canConvert<QString>();          // returns true

 MyCustomStruct s;
 v.setValue(s);

 v.canConvert<int>();              // returns false
 v.canConvert<MyCustomStruct>();   // returns true

Warning: This function is not available with MSVC 6. Use qVariantCanConvert() instead if you need to support that version of the compiler.

See also convert().

void QVariant::clear ()

Convert this variant to type Invalid and free up any resources used.

bool QVariant::convert ( Type t )

Casts the variant to the requested type. If the cast cannot be done, the variant is set to the default value of the requested type (e.g. an empty string if the requested type t is QVariant::String, an empty point array if the requested type t is QVariant::Polygon, etc). Returns true if the current type of the variant was successfully cast; otherwise returns false.

See also canConvert().

QVariant QVariant::fromValue ( const T & value )   [static]

Returns a QVariant containing a copy of value. Behaves exactly like setValue() otherwise.

Example:

 MyCustomStruct s;
 return QVariant::fromValue(s);

Warning: This function is not available with MSVC 6. Use qVariantFromValue() instead if you need to support that version of the compiler.

See also setValue() and value().

bool QVariant::isNull () const

Returns true if this is a NULL variant, false otherwise.

bool QVariant::isValid () const

Returns true if the storage type of this variant is not QVariant::Invalid; otherwise returns false.

Type QVariant::nameToType ( const char * name )   [static]

Converts the string representation of the storage type given in name, to its enum representation.

If the string representation cannot be converted to any enum representation, the variant is set to Invalid.

void QVariant::setValue ( const T & value )

Stores a copy of value. If T is a type that QVariant doesn't support, QMetaType is used to store the value. A compile error will occur if QMetaType doesn't handle the type.

Example:

 QVariant v;

 v.setValue(5);
 int i = v.toInt();         // i is now 5
 QString s = v.toString()   // s is now "5"

 MyCustomStruct c;
 v.setValue(c);

 ...

 MyCustomStruct c2 = v.value<MyCustomStruct>();

Warning: This function is not available with MSVC 6. Use qVariantSetValue() instead if you need to support that version of the compiler.

See also value(), fromValue(), and canConvert().

QBitArray QVariant::toBitArray () const

Returns the variant as a QBitArray if the variant has type() BitArray; otherwise returns an empty bit array.

See also canConvert() and convert().

bool QVariant::toBool () const

Returns the variant as a bool if the variant has type() Bool.

Returns true if the variant has type() Bool, Char, Double, Int, LongLong, UInt, or ULongLong and the value is non-zero, or if the variant has type String and its lower-case content is not empty, "0" or "false"; otherwise returns false.

See also canConvert() and convert().

QByteArray QVariant::toByteArray () const

Returns the variant as a QByteArray if the variant has type() ByteArray or String (converted using QString::fromAscii()); otherwise returns an empty byte array.

See also canConvert() and convert().

QChar QVariant::toChar () const

Returns the variant as a QChar if the variant has type() Char, Int, or UInt; otherwise returns an invalid QChar.

See also canConvert() and convert().

QDate QVariant::toDate () const

Returns the variant as a QDate if the variant has type() Date, DateTime, or String; otherwise returns an invalid date.

If the type() is String, an invalid date will be returned if the string cannot be parsed as a Qt::ISODate format date.

See also canConvert() and convert().

QDateTime QVariant::toDateTime () const

Returns the variant as a QDateTime if the variant has type() DateTime, Date, or String; otherwise returns an invalid date/time.

If the type() is String, an invalid date/time will be returned if the string cannot be parsed as a Qt::ISODate format date/time.

See also canConvert() and convert().

double QVariant::toDouble ( bool * ok = 0 ) const

Returns the variant as a double if the variant has type() Double, Bool, ByteArray, Int, LongLong, String, UInt, or ULongLong; otherwise returns 0.0.

If ok is non-null: *ok is set to true if the value could be converted to a double; otherwise *ok is set to false.

See also canConvert() and convert().

int QVariant::toInt ( bool * ok = 0 ) const

Returns the variant as an int if the variant has type() Int, Bool, ByteArray, Char, Double, LongLong, String, UInt, or ULongLong; otherwise returns 0.

If ok is non-null: *ok is set to true if the value could be converted to an int; otherwise *ok is set to false.

See also canConvert() and convert().

QLine QVariant::toLine () const

Returns the variant as a QLine if the variant has type() Line; otherwise returns an invalid QLine.

See also canConvert() and convert().

QLineF QVariant::toLineF () const

Returns the variant as a QLineF if the variant has type() LineF; otherwise returns an invalid QLineF.

See also canConvert() and convert().

QList<QVariant> QVariant::toList () const

Returns the variant as a QVariantList if the variant has type() List or StringList; otherwise returns an empty list.

See also canConvert() and convert().

QLocale QVariant::toLocale () const

Returns the variant as a QLocale if the variant has type() Locale; otherwise returns an invalid QLocale.

See also canConvert() and convert().

qlonglong QVariant::toLongLong ( bool * ok = 0 ) const

Returns the variant as a long long int if the variant has type() LongLong, Bool, ByteArray, Char, Double, Int, String, UInt, or ULongLong; otherwise returns 0.

If ok is non-null: *ok is set to true if the value could be converted to an int; otherwise *ok is set to false.

See also canConvert() and convert().

QMap<QString, QVariant> QVariant::toMap () const

Returns the variant as a QMap<QString, QVariant> if the variant has type() Map; otherwise returns an empty map.

See also canConvert() and convert().

QPoint QVariant::toPoint () const

Returns the variant as a QPoint if the variant has type() Point or PointF; otherwise returns a null QPoint.

See also canConvert() and convert().

QPointF QVariant::toPointF () const

Returns the variant as a QPointF if the variant has type() Point or PointF; otherwise returns a null QPointF.

See also canConvert() and convert().

QRect QVariant::toRect () const

Returns the variant as a QRect if the variant has type() Rect; otherwise returns an invalid QRect.

See also canConvert() and convert().

QRectF QVariant::toRectF () const

Returns the variant as a QRectF if the variant has type() Rect or RectF; otherwise returns an invalid QRectF.

See also canConvert() and convert().

QRegExp QVariant::toRegExp () const

Returns the variant as a QRegExp if the variant has type() RegExp; otherwise returns an empty QRegExp.

This function was introduced in Qt 4.1.

See also canConvert() and convert().

QSize QVariant::toSize () const

Returns the variant as a QSize if the variant has type() Size; otherwise returns an invalid QSize.

See also canConvert() and convert().

QSizeF QVariant::toSizeF () const

Returns the variant as a QSizeF if the variant has type() SizeF; otherwise returns an invalid QSizeF.

See also canConvert() and convert().

QString QVariant::toString () const

Returns the variant as a QString if the variant has type() String, Bool, ByteArray, Char, Date, DateTime, Double, Int, LongLong, StringList, Time, UInt, or ULongLong; otherwise returns an empty string.

See also canConvert() and convert().

QStringList QVariant::toStringList () const

Returns the variant as a QStringList if the variant has type() StringList, String, or List of a type that can be converted to QString; otherwise returns an empty list.

See also canConvert() and convert().

QTime QVariant::toTime () const

Returns the variant as a QTime if the variant has type() Time, DateTime, or String; otherwise returns an invalid time.

If the type() is String, an invalid time will be returned if the string cannot be parsed as a Qt::ISODate format time.

See also canConvert() and convert().

uint QVariant::toUInt ( bool * ok = 0 ) const

Returns the variant as an unsigned int if the variant has type() UInt, Bool, ByteArray, Char, Double, Int, LongLong, String, or ULongLong; otherwise returns 0.

If ok is non-null: *ok is set to true if the value could be converted to an unsigned int; otherwise *ok is set to false.

See also canConvert() and convert().

qulonglong QVariant::toULongLong ( bool * ok = 0 ) const

Returns the variant as as an unsigned long long int if the variant has type() ULongLong, Bool, ByteArray, Char, Double, Int, LongLong, String, or UInt; otherwise returns 0.

If ok is non-null: *ok is set to true if the value could be converted to an int; otherwise *ok is set to false.

See also canConvert() and convert().

QUrl QVariant::toUrl () const

Returns the variant as a QUrl if the variant has type() Url; otherwise returns an invalid QUrl.

See also canConvert() and convert().

Type QVariant::type () const

Returns the storage type of the value stored in the variant. Usually it's best to test with canConvert() whether the variant can deliver the data type you are interested in.

const char * QVariant::typeName () const

Returns the name of the type stored in the variant. The returned strings describe the C++ datatype used to store the data: for example, "QFont", "QString", or "QVariantList". An Invalid variant returns 0.

const char * QVariant::typeToName ( Type typ )   [static]

Converts the enum representation of the storage type, typ, to its string representation.

Returns a null pointer if the type is QVariant::Invalid or doesn't exist.

int QVariant::userType () const

Returns the storage type of the value stored in the variant. For non-user types, this is the same as type().

See also type().

T QVariant::value () const

Returns the stored value converted to the template type T. Call canConvert() to find out whether a type can be converted. If the value cannot be converted, default-constructed value will be returned.

If the type T is supported by QVariant, this function behaves exactly as toString(), toInt() etc.

Example:

 QVariant v;

 MyCustomStruct c;
 if (v.canConvert<MyCustomStruct>())
     c = v.value<MyCustomStruct>(v);

 v = 7;
 int i = v.value<int>();                        // same as v.toInt()
 QString s = v.value<QString>();                // same as v.toString(), s is now "7"
 MyCustomStruct c2 = v.value<MyCustomStruct>(); // conversion failed, c2 is empty

Warning: This function is not available with MSVC 6. Use qVariantValue() or qvariant_cast() instead if you need to support that version of the compiler.

See also setValue(), fromValue(), and canConvert().

bool QVariant::operator!= ( const QVariant & v ) const

Compares this QVariant with v and returns true if they are not equal; otherwise returns false.

Warning: This function doesn't support custom types registered with qRegisterMetaType().

QVariant & QVariant::operator= ( const QVariant & variant )

Assigns the value of the variant variant to this variant.

bool QVariant::operator== ( const QVariant & v ) const

Compares this QVariant with v and returns true if they are equal; otherwise returns false.

Warning: This function doesn't support custom types registered with qRegisterMetaType().

Related Non-Members

typedef QVariantList

Synonym for QList<QVariant>.

typedef QVariantMap

Synonym for QMap<QString, QVariant>.

bool qVariantCanConvert ( const QVariant & value )

Returns true if the given value can be converted to the template type specified; otherwise returns false.

This function is equivalent to QVariant::canConvert(value). It is provided as a work-around for MSVC 6, which doesn't support member template functions.

See also QVariant::canConvert().

QVariant qVariantFromValue ( const T & value )

Returns a variant containing a copy of the given value with template type T.

This function is equivalent to QVariant::fromValue(value). It is provided as a work-around for MSVC 6, which doesn't support member template functions.

For example, a QObject pointer can be stored in a variant with the following code:

 QObject *object = getObjectFromSomewhere();
 QVariant data = qVariantFromValue(object);

See also QVariant::fromValue().

void qVariantSetValue ( QVariant & variant, const T & value )

Sets the contents of the given variant to a copy of the value with the specified template type T.

This function is equivalent to QVariant::setValue(value). It is provided as a work-around for MSVC 6, which doesn't support member template functions.

See also QVariant::setValue().

T qVariantValue ( const QVariant & value )

Returns the given value converted to the template type T.

This function is equivalent to QVariant::value<T>(value). It is provided as a work-around for MSVC 6, which doesn't support member template functions.

See also QVariant::value() and qvariant_cast().

T qvariant_cast ( const QVariant & value )

Returns the given value converted to the template type T.

This function is equivalent to qVariantValue().

See also qVariantValue() and QVariant::value().

bool operator!= ( const QVariant & v1, const QVariant & v2 )

This is an overloaded member function, provided for convenience.

Returns false if v1 and v2 are equal; otherwise returns true.

Warning: This function doesn't support custom types registered with qRegisterMetaType().

bool operator== ( const QVariant & v1, const QVariant & v2 )

This is an overloaded member function, provided for convenience.

Returns true if v1 and v2 are equal; otherwise returns false.

Warning: This function doesn't support custom types registered with qRegisterMetaType().