QPen Class Reference
[QtGui module]

Join Style

The join style defines how joins between two connected lines can be drawn using QPainter. The join style only apply to wide lines, i.e. when the width is 1 or greater. The Qt::PenJoinStyle enum provides the following styles:

Qt::BevelJoin	Qt::MiterJoin	Qt::RoundJoin

The Qt::BevelJoin style fills the triangular notch between the two lines. The Qt::MiterJoin style extends the lines to meet at an angle. And the Qt::RoundJoin style fills a circular arc between the two lines.

The default is Qt::BevelJoin.

When the Qt::MiterJoin style is applied, it is possible to use the setMiterLimit() function to specify how far the miter join can extend from the join point. The miterLimit() is used to reduce artifacts between line joins where the lines are close to parallel.

The miterLimit() must be specified in units of the pens width, e.g. a miter limit of 5 in width 10 is 50 pixels long. The default miter limit is 2, i.e. twice the pen width in pixels.

The Path Stroking Demo The Path Stroking demo shows Qt's built-in dash patterns and shows how custom patterns can be used to extend the range of available patterns.

See also QPainter, QBrush, Path Stroking Demo, and Scribble Example.

Member Function Documentation

QPen::QPen ()

Constructs a default black solid line pen with 0 width.

QPen::QPen ( Qt::PenStyle style )

Constructs a black pen with 0 width and the given style.

See also setStyle().

QPen::QPen ( const QColor & color )

Constructs a solid line pen with 0 width and the given color.

See also setBrush() and setColor().

QPen::QPen ( const QBrush & brush, qreal width, Qt::PenStyle style = Qt::SolidLine, Qt::PenCapStyle cap = Qt::SquareCap, Qt::PenJoinStyle join = Qt::BevelJoin )

Constructs a pen with the specified brush, width, pen style, cap style and join style.

See also setBrush(), setWidth(), setStyle(), setCapStyle(), and setJoinStyle().

QPen::QPen ( const QPen & pen )

Constructs a pen that is a copy of the given pen.

QPen::~QPen ()

Destroys the pen.

QBrush QPen::brush () const

Returns the brush used to fill strokes generated with this pen.

See also setBrush().

Qt::PenCapStyle QPen::capStyle () const

Returns the pen's cap style.

See also setCapStyle() and Cap Style.

QColor QPen::color () const

Returns the color of this pen's brush.

See also brush() and setColor().

qreal QPen::dashOffset () const

Returns the dash offset for the pen.

See also setDashOffset().

QVector<qreal> QPen::dashPattern () const

Returns the dash pattern of this pen.

See also setDashPattern(), style(), and isSolid().

bool QPen::isCosmetic () const

Returns true if the pen is cosmetic; otherwise returns false.

Cosmetic pens are used to draw strokes that have a constant width regardless of any transformations applied to the QPainter they are used with. Drawing a shape with a cosmetic pen ensures that its outline will have the same thickness at different scale factors.

A zero width pen is cosmetic by default; pens with a non-zero width are non-cosmetic.

See also setCosmetic() and widthF().

bool QPen::isSolid () const

Returns true if the pen has a solid fill, otherwise false.

See also style() and dashPattern().

Qt::PenJoinStyle QPen::joinStyle () const

Returns the pen's join style.

See also setJoinStyle() and Join Style.

qreal QPen::miterLimit () const

Returns the miter limit of the pen. The miter limit is only relevant when the join style is set to Qt::MiterJoin.

See also setMiterLimit() and Join Style.

void QPen::setBrush ( const QBrush & brush )

Sets the brush used to fill strokes generated with this pen to the given brush.

See also brush() and setColor().

void QPen::setCapStyle ( Qt::PenCapStyle style )

Sets the pen's cap style to the given style. The default value is Qt::SquareCap.

See also capStyle() and Cap Style.

void QPen::setColor ( const QColor & color )

Sets the color of this pen's brush to the given color.

See also setBrush() and color().

void QPen::setCosmetic ( bool cosmetic )

Sets this pen to cosmetic or non-cosmetic, depending on the value of cosmetic.

See also isCosmetic().

void QPen::setDashOffset ( qreal offset )

Sets the dash offset for this pen to the given offset. This implicitly converts the style of the pen to Qt::CustomDashLine.

See also dashOffset().

void QPen::setDashPattern ( const QVector<qreal> & pattern )

Sets the dash pattern for this pen to the given pattern. This implicitly converts the style of the pen to Qt::CustomDashLine.

The pattern must be specified as an even number of entries where the entries 1, 3, 5... are the dashes and 2, 4, 6... are the spaces. For example:

QPen pen; QVector<qreal> dashes; qreal space = 4; dashes << 1 << space << 3 << space << 9 << space << 27 << space << 9; pen.setDashPattern(dashes);

The dash pattern is specified in units of the pens width; e.g. a dash of length 5 in width 10 is 50 pixels long. Note that a pen with zero width is equivalent to a cosmetic pen with a width of 1 pixel.

Each dash is also subject to cap styles so a dash of 1 with square cap set will extend 0.5 pixels out in each direction resulting in a total width of 2.

Note that the default cap style is Qt::SquareCap, meaning that a square line end covers the end point and extends beyond it by half the line width.

See also setStyle(), dashPattern(), setCapStyle(), and setCosmetic().

void QPen::setJoinStyle ( Qt::PenJoinStyle style )

Sets the pen's join style to the given style. The default value is Qt::BevelJoin.

See also joinStyle() and Join Style.

void QPen::setMiterLimit ( qreal limit )

Sets the miter limit of this pen to the given limit.

The miter limit describes how far a miter join can extend from the join point. This is used to reduce artifacts between line joins where the lines are close to parallel.

This value does only have effect when the pen style is set to Qt::MiterJoin. The value is specified in units of the pen's width, e.g. a miter limit of 5 in width 10 is 50 pixels long. The default miter limit is 2, i.e. twice the pen width in pixels.

See also miterLimit(), setJoinStyle(), and Join Style.

void QPen::setStyle ( Qt::PenStyle style )

Sets the pen style to the given style.

See the Qt::PenStyle documentation for a list of the available styles. Since Qt 4.1 it is also possible to specify a custom dash pattern using the setDashPattern() function which implicitly converts the style of the pen to Qt::CustomDashLine.

See also style() and Pen Style.

void QPen::setWidth ( int width )

Sets the pen width to the given width in pixels with integer precision.

A line width of zero indicates a cosmetic pen. This means that the pen width is always drawn one pixel wide, independent of the transformation set on the painter.

Setting a pen width with a negative value is not supported.

See also setWidthF() and width().

void QPen::setWidthF ( qreal width )

Sets the pen width to the given width in pixels with floating point precision.

A line width of zero indicates a cosmetic pen. This means that the pen width is always drawn one pixel wide, independent of the transformation on the painter.

Setting a pen width with a negative value is not supported.

See also setWidth() and widthF().

Qt::PenStyle QPen::style () const

Returns the pen style.

See also setStyle() and Pen Style.

int QPen::width () const

Returns the pen width with integer precision.

See also setWidth() and widthF().

qreal QPen::widthF () const

Returns the pen width with floating point precision.

See also setWidthF() and width().

QPen::operator QVariant () const

Returns the pen as a QVariant.

bool QPen::operator!= ( const QPen & pen ) const

Returns true if the pen is different from the given pen; otherwise false. Two pens are different if they have different styles, widths or colors.

See also operator==().

QPen & QPen::operator= ( const QPen & pen )

Assigns the given pen to this pen and returns a reference to this pen.

bool QPen::operator== ( const QPen & pen ) const

Returns true if the pen is equal to the given pen; otherwise false. Two pens are equal if they have equal styles, widths and colors.

See also operator!=().

Related Non-Members

QDataStream & operator<< ( QDataStream & stream, const QPen & pen )

This is an overloaded member function, provided for convenience.

Writes the given pen to the given stream and returns a reference to the stream.

See also Format of the QDataStream Operators.

QDataStream & operator>> ( QDataStream & stream, QPen & pen )

This is an overloaded member function, provided for convenience.

Reads a pen from the given stream into the given pen and returns a reference to the stream.

See also Format of the QDataStream Operators.