Viadeo Twitter Google Bookmarks ! Facebook Digg del.icio.us MySpace Yahoo MyWeb Blinklist Netvouz Reddit Simpy StumbleUpon Bookmarks Windows Live Favorites 
Logo Documentation Qt ·  Page d'accueil  ·  Toutes les classes  ·  Toutes les fonctions  ·  Vues d'ensemble  · 

QXmlStreamWriter Class Reference
[QtCore module]

The QXmlStreamWriter class provides an XML writer with a simple streaming API. More...

 #include <QXmlStreamWriter>

Note: All functions in this class are reentrant.

This class was introduced in Qt 4.3.


Properties


Public Functions

QXmlStreamWriter ()
QXmlStreamWriter ( QIODevice * device )
QXmlStreamWriter ( QByteArray * array )
QXmlStreamWriter ( QString * string )
~QXmlStreamWriter ()
bool autoFormatting () const
int autoFormattingIndent () const
QTextCodec * codec () const
QIODevice * device () const
void setAutoFormatting ( bool enable )
void setAutoFormattingIndent ( int spacesOrTabs )
void setCodec ( QTextCodec * codec )
void setCodec ( const char * codecName )
void setDevice ( QIODevice * device )
void writeAttribute ( const QString & namespaceUri, const QString & name, const QString & value )
void writeAttribute ( const QString & qualifiedName, const QString & value )
void writeAttribute ( const QXmlStreamAttribute & attribute )
void writeAttributes ( const QXmlStreamAttributes & attributes )
void writeCDATA ( const QString & text )
void writeCharacters ( const QString & text )
void writeComment ( const QString & text )
void writeCurrentToken ( const QXmlStreamReader & reader )
void writeDTD ( const QString & dtd )
void writeDefaultNamespace ( const QString & namespaceUri )
void writeEmptyElement ( const QString & namespaceUri, const QString & name )
void writeEmptyElement ( const QString & qualifiedName )
void writeEndDocument ()
void writeEndElement ()
void writeEntityReference ( const QString & name )
void writeNamespace ( const QString & namespaceUri, const QString & prefix = QString() )
void writeProcessingInstruction ( const QString & target, const QString & data = QString() )
void writeStartDocument ( const QString & version )
void writeStartDocument ( const QString & version, bool standalone )
void writeStartDocument ()
void writeStartElement ( const QString & namespaceUri, const QString & name )
void writeStartElement ( const QString & qualifiedName )
void writeTextElement ( const QString & namespaceUri, const QString & name, const QString & text )
void writeTextElement ( const QString & qualifiedName, const QString & text )

Detailed Description

The QXmlStreamWriter class provides an XML writer with a simple streaming API.

QXmlStreamWriter is the counterpart to QXmlStreamReader for writing XML. Like its related class, it operates on a QIODevice specified with setDevice(). The API is simple and straightforward: for every XML token or event you want to write, the writer provides a specialized function.

You start a document with writeStartDocument() and end it with writeEndDocument(). This will implicitly close all remaining open tags.

Element tags are opened with writeStartElement() followed by writeAttribute() or writeAttributes(), element content, and then writeEndElement(). A shorter form writeEmptyElement() can be used to write empty elements, followed by writeAttributes().

Element content consists of either characters, entity references or nested elements. It is written with writeCharacters(), which also takes care of escaping all forbidden characters and character sequences, writeEntityReference(), or subsequent calls to writeStartElement(). A convenience method writeTextElement() can be used for writing terminal elements that contain nothing but text.

The following abridged code snippet shows the basic use of the class to write formatted XML with indentation:

     QXmlStreamWriter stream(&output);
     stream.setAutoFormatting(true);
     stream.writeStartDocument();
     ...
     stream.writeStartElement("bookmark");
     stream.writeAttribute("href", "http://qt.nokia.com/");
     stream.writeTextElement("title", "Qt Home");
     stream.writeEndElement(); // bookmark
     ...
     stream.writeEndDocument();

QXmlStreamWriter takes care of prefixing namespaces, all you have to do is specify the namespaceUri when writing elements or attributes. If you must conform to certain prefixes, you can force the writer to use them by declaring the namespaces manually with either writeNamespace() or writeDefaultNamespace(). Alternatively, you can bypass the stream writer's namespace support and use overloaded methods that take a qualified name instead. The namespace http://www.w3.org/XML/1998/namespace is implicit and mapped to the prefix xml.

The stream writer can automatically format the generated XML data by adding line-breaks and indentation to empty sections between elements, making the XML data more readable for humans and easier to work with for most source code management systems. The feature can be turned on with the autoFormatting property, and customized with the autoFormattingIndent property.

Other functions are writeCDATA(), writeComment(), writeProcessingInstruction(), and writeDTD(). Chaining of XML streams is supported with writeCurrentToken().

By default, QXmlStreamWriter encodes XML in UTF-8. Different encodings can be enforced using setCodec().

The QXmlStream Bookmarks Example illustrates how to use a stream writer to write an XML bookmark file (XBEL) that was previously read in by a QXmlStreamReader.


Property Documentation

autoFormatting : bool

the auto-formatting flag of the stream writer

This property controls whether or not the stream writer automatically formats the generated XML data. If enabled, the writer automatically adds line-breaks and indentation to empty sections between elements (ignorable whitespace). The main purpose of auto-formatting is to split the data into several lines, and to increase readability for a human reader. The indentation depth can be controlled through the autoFormattingIndent property.

By default, auto-formatting is disabled.

This property was introduced in Qt 4.4.

Access functions:

bool autoFormatting () const
void setAutoFormatting ( bool enable )

autoFormattingIndent : int

This property holds the number of spaces or tabs used for indentation when auto-formatting is enabled. Positive numbers indicate spaces, negative numbers tabs.

The default indentation is 4.

This property was introduced in Qt 4.4.

Access functions:

int autoFormattingIndent () const
void setAutoFormattingIndent ( int spacesOrTabs )

See also autoFormatting.


Member Function Documentation

QXmlStreamWriter::QXmlStreamWriter ()

Constructs a stream writer.

See also setDevice().

QXmlStreamWriter::QXmlStreamWriter ( QIODevice * device )

Constructs a stream writer that writes into device;

QXmlStreamWriter::QXmlStreamWriter ( QByteArray * array )

Constructs a stream writer that writes into array. This is the same as creating an xml writer that operates on a QBuffer device which in turn operates on array.

QXmlStreamWriter::QXmlStreamWriter ( QString * string )

Constructs a stream writer that writes into string.

QXmlStreamWriter::~QXmlStreamWriter ()

Destructor.

QTextCodec * QXmlStreamWriter::codec () const

Returns the codec that is currently assigned to the stream.

See also setCodec().

QIODevice * QXmlStreamWriter::device () const

Returns the current device associated with the QXmlStreamWriter, or 0 if no device has been assigned.

See also setDevice().

void QXmlStreamWriter::setCodec ( QTextCodec * codec )

Sets the codec for this stream to codec. The codec is used for encoding any data that is written. By default, QXmlStreamWriter uses UTF-8.

The encoding information is stored in the initial xml tag which gets written when you call writeStartDocument(). Call this function before calling writeStartDocument().

See also codec().

void QXmlStreamWriter::setCodec ( const char * codecName )

Sets the codec for this stream to the QTextCodec for the encoding specified by codecName. Common values for codecName include "ISO 8859-1", "UTF-8", and "UTF-16". If the encoding isn't recognized, nothing happens.

See also QTextCodec::codecForName().

void QXmlStreamWriter::setDevice ( QIODevice * device )

Sets the current device to device. If you want the stream to write into a QByteArray, you can create a QBuffer device.

See also device().

void QXmlStreamWriter::writeAttribute ( const QString & namespaceUri, const QString & name, const QString & value )

Writes an attribute with name and value, prefixed for the specified namespaceUri. If the namespace has not been declared yet, QXmlStreamWriter will generate a namespace declaration for it.

This function can only be called after writeStartElement() before any content is written, or after writeEmptyElement().

void QXmlStreamWriter::writeAttribute ( const QString & qualifiedName, const QString & value )

This is an overloaded function.

Writes an attribute with qualifiedName and value.

This function can only be called after writeStartElement() before any content is written, or after writeEmptyElement().

void QXmlStreamWriter::writeAttribute ( const QXmlStreamAttribute & attribute )

This is an overloaded function.

Writes the attribute.

This function can only be called after writeStartElement() before any content is written, or after writeEmptyElement().

void QXmlStreamWriter::writeAttributes ( const QXmlStreamAttributes & attributes )

Writes the attribute vector attributes. If a namespace referenced in an attribute not been declared yet, QXmlStreamWriter will generate a namespace declaration for it.

This function can only be called after writeStartElement() before any content is written, or after writeEmptyElement().

See also writeAttribute() and writeNamespace().

void QXmlStreamWriter::writeCDATA ( const QString & text )

Writes text as CDATA section. If text contains the forbidden character sequence "]]>", it is split into different CDATA sections.

This function mainly exists for completeness. Normally you should not need use it, because writeCharacters() automatically escapes all non-content characters.

void QXmlStreamWriter::writeCharacters ( const QString & text )

Writes text. The characters "<", "&", and """ are escaped as entity references "&lt;", "&amp;, and "&quot;". To avoid the forbidden sequence "]]>", ">" is also escaped as "&gt;".

See also writeEntityReference().

void QXmlStreamWriter::writeComment ( const QString & text )

Writes text as XML comment, where text must not contain the forbidden sequence "--" or end with "-". Note that XML does not provide any way to escape "-" in a comment.

void QXmlStreamWriter::writeCurrentToken ( const QXmlStreamReader & reader )

Writes the current state of the reader. All possible valid states are supported.

The purpose of this function is to support chained processing of XML data.

See also QXmlStreamReader::tokenType().

void QXmlStreamWriter::writeDTD ( const QString & dtd )

Writes a DTD section. The dtd represents the entire doctypedecl production from the XML 1.0 specification.

void QXmlStreamWriter::writeDefaultNamespace ( const QString & namespaceUri )

Writes a default namespace declaration for namespaceUri.

If writeStartElement() or writeEmptyElement() was called, the declaration applies to the current element; otherwise it applies to the next child element.

Note that the namespaces http://www.w3.org/XML/1998/namespace (bound to xmlns) and http://www.w3.org/2000/xmlns/ (bound to xml) by definition cannot be declared as default.

void QXmlStreamWriter::writeEmptyElement ( const QString & namespaceUri, const QString & name )

Writes an empty element with name, prefixed for the specified namespaceUri. If the namespace has not been declared, QXmlStreamWriter will generate a namespace declaration for it. Subsequent calls to writeAttribute() will add attributes to this element.

See also writeNamespace().

void QXmlStreamWriter::writeEmptyElement ( const QString & qualifiedName )

This is an overloaded function.

Writes an empty element with qualified name qualifiedName. Subsequent calls to writeAttribute() will add attributes to this element.

void QXmlStreamWriter::writeEndDocument ()

Closes all remaining open start elements and writes a newline.

See also writeStartDocument().

void QXmlStreamWriter::writeEndElement ()

Closes the previous start element.

See also writeStartElement().

void QXmlStreamWriter::writeEntityReference ( const QString & name )

Writes the entity reference name to the stream, as "&name;".

void QXmlStreamWriter::writeNamespace ( const QString & namespaceUri, const QString & prefix = QString() )

Writes a namespace declaration for namespaceUri with prefix. If prefix is empty, QXmlStreamWriter assigns a unique prefix consisting of the letter 'n' followed by a number.

If writeStartElement() or writeEmptyElement() was called, the declaration applies to the current element; otherwise it applies to the next child element.

Note that the prefix xml is both predefined and reserved for http://www.w3.org/XML/1998/namespace, which in turn cannot be bound to any other prefix. The prefix xmlns and its URI http://www.w3.org/2000/xmlns/ are used for the namespace mechanism itself and thus completely forbidden in declarations.

void QXmlStreamWriter::writeProcessingInstruction ( const QString & target, const QString & data = QString() )

Writes an XML processing instruction with target and data, where data must not contain the sequence "?>".

void QXmlStreamWriter::writeStartDocument ( const QString & version )

Writes a document start with the XML version number version.

See also writeEndDocument().

void QXmlStreamWriter::writeStartDocument ( const QString & version, bool standalone )

Writes a document start with the XML version number version and a standalone attribute standalone.

This function was introduced in Qt 4.5.

See also writeEndDocument().

void QXmlStreamWriter::writeStartDocument ()

This is an overloaded function.

Writes a document start with XML version number "1.0". This also writes the encoding information.

This function was introduced in Qt 4.5.

See also writeEndDocument() and setCodec().

void QXmlStreamWriter::writeStartElement ( const QString & namespaceUri, const QString & name )

Writes a start element with name, prefixed for the specified namespaceUri. If the namespace has not been declared yet, QXmlStreamWriter will generate a namespace declaration for it. Subsequent calls to writeAttribute() will add attributes to this element.

See also writeNamespace(), writeEndElement(), and writeEmptyElement().

void QXmlStreamWriter::writeStartElement ( const QString & qualifiedName )

This is an overloaded function.

Writes a start element with qualifiedName. Subsequent calls to writeAttribute() will add attributes to this element.

See also writeEndElement() and writeEmptyElement().

void QXmlStreamWriter::writeTextElement ( const QString & namespaceUri, const QString & name, const QString & text )

Writes a text element with name, prefixed for the specified namespaceUri, and text. If the namespace has not been declared, QXmlStreamWriter will generate a namespace declaration for it.

This is a convenience function equivalent to:

         writeStartElement(namespaceUri, name);
         writeCharacters(text);
         writeEndElement();

void QXmlStreamWriter::writeTextElement ( const QString & qualifiedName, const QString & text )

This is an overloaded function.

Writes a text element with qualifiedName and text.

This is a convenience function equivalent to:

         writeStartElement(qualifiedName);
         writeCharacters(text);
         writeEndElement();

Publicité

Best Of

Actualités les plus lues

Semaine
Mois
Année
  1. « Quelque chose ne va vraiment pas avec les développeurs "modernes" », un développeur à "l'ancienne" critique la multiplication des bibliothèques 103
  2. Pourquoi les programmeurs sont-ils moins payés que les gestionnaires de programmes ? Manquent-ils de pouvoir de négociation ? 56
  3. «Le projet de loi des droits du développeur» : quelles conditions doivent remplir les entreprises pour que le développeur puisse réussir ? 90
  4. Les développeurs détestent-ils les antivirus ? Un programmeur manifeste sa haine envers ces solutions de sécurité 31
  5. Qt Commercial : Digia organise un webinar gratuit le 27 mars sur la conception d'interfaces utilisateur et d'applications avec le framework 0
  6. Quelles nouveautés de C++11 Visual C++ doit-il rapidement intégrer ? Donnez-nous votre avis 10
  7. 2017 : un quinquennat pour une nouvelle version du C++ ? Possible, selon Herb Sutter 11
Page suivante
  1. Linus Torvalds : le "C++ est un langage horrible", en justifiant le choix du C pour le système de gestion de version Git 100
  2. Comment prendre en compte l'utilisateur dans vos applications ? Pour un développeur, « 90 % des utilisateurs sont des idiots » 231
  3. Quel est LE livre que tout développeur doit lire absolument ? Celui qui vous a le plus marqué et inspiré 96
  4. Apple cède et s'engage à payer des droits à Nokia, le conflit des brevets entre les deux firmes s'achève 158
  5. Nokia porte à nouveau plainte contre Apple pour violation de sept nouveaux brevets 158
  6. « Quelque chose ne va vraiment pas avec les développeurs "modernes" », un développeur à "l'ancienne" critique la multiplication des bibliothèques 103
  7. Quel est le code dont vous êtes le plus fier ? Pourquoi l'avez-vous écrit ? Et pourquoi vous a-t-il donné autant de satisfaction ? 83
Page suivante

Le Qt Developer Network au hasard

Logo

Comment fermer une application

Le Qt Developer Network est un réseau de développeurs Qt anglophone, où ils peuvent partager leur expérience sur le framework. Lire l'article.

Communauté

Ressources

Liens utiles

Contact

  • Vous souhaitez rejoindre la rédaction ou proposer un tutoriel, une traduction, une question... ? Postez dans le forum Contribuez ou contactez-nous par MP ou par email (voir en bas de page).

Qt dans le magazine

Cette page est une traduction d'une page de la documentation de Qt, écrite par Nokia Corporation and/or its subsidiary(-ies). Les éventuels problèmes résultant d'une mauvaise traduction ne sont pas imputables à Nokia. Qt 4.6-snapshot
Copyright © 2012 Developpez LLC. Tous droits réservés Developpez LLC. Aucune reproduction, même partielle, ne peut être faite de ce site et de l'ensemble de son contenu : textes, documents et images sans l'autorisation expresse de Developpez LLC. Sinon, vous encourez selon la loi jusqu'à 3 ans de prison et jusqu'à 300 000 E de dommages et intérêts. Cette page est déposée à la SACD.
Vous avez déniché une erreur ? Un bug ? Une redirection cassée ? Ou tout autre problème, quel qu'il soit ? Ou bien vous désirez participer à ce projet de traduction ? N'hésitez pas à nous contacter ou par MP !
 
 
 
 
Partenaires

Hébergement Web