Viadeo Twitter Google Bookmarks ! Facebook Digg del.icio.us MySpace Yahoo MyWeb Blinklist Netvouz Reddit Simpy StumbleUpon Bookmarks Windows Live Favorites 
Logo Documentation Qt ·  Page d'accueil  ·  Toutes les classes  ·  Toutes les fonctions  ·  Vues d'ensemble  · 

QML Animation and Transitions

Animation and Transitions Elements

Elements that animate properties based on data types

In QML, animations are created by applying animation elements to property values. Animation elements will interpolate property values to create smooth transitions. As well, state transitions may assign animations to state changes.

To create an animation, use an appropriate animation element for the type of the property that is to be animated, and apply the animation depending on the type of behavior that is required.

Triggering Animations

There are several ways of setting animation to an object.

Direct Property Animation

To create an immediate movement or animated movement, set the property value directly. This may be done in signal handlers or attached properties.

 Rectangle {
     id: blob
     width: 75; height: 75
     color: "blue"

     MouseArea {
         anchors.fill: parent
         onClicked: blob.color = "green"
     }
 }

However, to create more control, property animations apply smooth movements by interpolating values between property value changes. Property animations provide timing controls and allows different interpolations through easing curves.

 Rectangle {
     id: flashingblob
     width: 75; height: 75
     color: "blue"
     opacity: 1.0

     MouseArea {
         anchors.fill: parent
         onClicked: {
             animateColor.start()
             animateOpacity.start()
         }
     }

     PropertyAnimation {id: animateColor; target: flashingblob; properties: "color"; to: "green"; duration: 100}

     NumberAnimation {
         id: animateOpacity
         target: flashingblob
         properties: "opacity"
         from: 0.99
         to: 1.0
         loops: Animation.Infinite
         easing {type: Easing.OutBack; overshoot: 500}
    }
 }

Specialized property animation elements have more efficient implementations than the PropertyAnimation element. They are for setting animations to different QML types such as int, color, and rotations. Similarly, the ParentAnimation can animate parent changes.

See the Controlling Animations section for more information about the different animation properties.

Transitions during State Changes

States are property configurations where a property may have different values to reflect different states. State changes introduce abrupt property changes; animations smooth transitions to produce visually appealing state changes.

The Transition element can contain animation elements to interpolate property changes caused by state changes. To assign the transition to an object, bind it to the transitions property.

A button might have two states, the pressed state when the user clicks on the button and a released state when the user releases the button. We can assign different property configurations for each state. A transition would animate the change from the pressed state to the released state. Likewise, there would be an animation during the change from the released state to the pressed state.

 Rectangle {
     width: 75; height: 75
     id: button
     state: "RELEASED"

     MouseArea {
         anchors.fill: parent
         onPressed: button.state = "PRESSED"
         onReleased: button.state = "RELEASED"
     }

     states: [
         State {
             name: "PRESSED"
             PropertyChanges { target: button; color: "lightblue"}
         },
         State {
             name: "RELEASED"
             PropertyChanges { target: button; color: "lightsteelblue"}
         }
     ]

     transitions: [
         Transition {
             from: "PRESSED"
             to: "RELEASED"
             ColorAnimation { target: button; duration: 100}
         },
         Transition {
             from: "RELEASED"
             to: "PRESSED"
             ColorAnimation { target: button; duration: 100}
         }
     ]
 }

Binding the to and from properties to the state's name will assign that particular transition to the state change. For simple or symmetric transitions, setting the to to property to the wild card symbol, "*", denotes that the transition applies to any state change.

     transitions:
         Transition {
             to: "*"
             ColorAnimation { target: button; duration: 100}
         }

Default Animation as Behaviors

Default property animations are set using behavior animations. Animations declared in Behavior elements apply to the property and animates any property value changes. However, Behavior elements have an enabled property to purposely enable or disable the behavior animations.

A ball component might have a behavior animation assigned to its x, y, and color properties. The behavior animation could be set up to simulate an elastic effect. In effect, this behavior animation would apply the elastic effect to the properties whenever the ball moves.

 Rectangle {
     width: 75; height: 75; radius: width
     id: ball
     color: "salmon"

     Behavior on x {
         NumberAnimation {
             id: bouncebehavior
             easing {
                 type: Easing.OutElastic
                 amplitude: 1.0
                 period: 0.5
             }
         }
     }
     Behavior on y {
         animation: bouncebehavior
     }
     Behavior {
         ColorAnimation { target: ball; duration: 100 }
     }
 }

There are several methods of assigning behavior animations to properties. The Behavior on <property> declaration is a convenient way of assigning a behavior animation onto a property.

See the Behaviors example for a demonstration of behavioral animations.

Playing Animations in Parallel or in Sequence

Animations can run in parallel or in sequence. Parallel animations will play a group of animations at the same time while sequential animations play a group of animations in order: one after the other. Grouping animations in SequentialAnimation and ParallelAnimation will play the animations in sequence or in parallel.

A banner component may have several icons or slogans to display, one after the other. The opacity property could transform to 1.0 denoting an opaque object. Using the SequentialAnimation element, the opacity animations will play after the preceding animation finishes. The ParallelAnimation element will play the animations at the same time.

 Rectangle {
     id: banner
     width: 150; height: 100; border.color: "black"

     Column {
         anchors.centerIn: parent
         Text {
             id: code
             text: "Code less."
             opacity: 0.01
         }
         Text {
             id: create
             text: "Create more."
             opacity: 0.01
         }
         Text {
             id: deploy
             text: "Deploy everywhere."
             opacity: 0.01
         }
     }

     MouseArea {
         anchors.fill: parent
         onPressed: playbanner.start()
     }

     SequentialAnimation {
         id: playbanner
         running: false
         NumberAnimation { target: code; property: "opacity"; to: 1.0; duration: 200}
         NumberAnimation { target: create; property: "opacity"; to: 1.0; duration: 200}
         NumberAnimation { target: deploy; property: "opacity"; to: 1.0; duration: 200}
     }
 }

Once individual animations are placed into a SequentialAnimation or ParallelAnimation, they can no longer be started and stopped independently. The sequential or parallel animation must be started and stopped as a group.

The SequentialAnimation element is also useful for playing transition animations because animations are played in parallel inside transitions.

See the Animation basics example for a demonstration of creating and combining multiple animations in QML.

Controlling Animations

There are different methods to control animations.

Animation Playback

All animation elements inherit from the Animation element. It is not possible to create Animation objects; instead, this element provides the essential properties and methods for animation elements. Animation elements have start(), stop(), resume(), pause(), restart(), and complete() -- all of these methods control the execution of animations.

Easing

Easing curves define how the animation will interpolate between the start value and the end value. Different easing curves might go beyond the defined range of interpolation. The easing curves simplify the creation of animation effects such as bounce effects, acceleration, deceleration, and cyclical animations.

A QML object may have different easing curve for each property animation. There are also different parameters to control the curve, some of which are exclusive to a particular curve. For more information about the easing curves, visit the easing documentation.

The easing example visually demonstrates each of the different easing types.

Other Animation Elements

In addition, QML provides several other elements useful for animation:

  • PauseAnimation: enables pauses during animations
  • ScriptAction: allows JavaScript to be executed during an animation, and can be used together with StateChangeScript to reused existing scripts
  • PropertyAction: changes a property immediately during an animation, without animating the property change

These are specialized animation elements that animate different property types

Publicité

Best Of

Actualités les plus lues

Semaine
Mois
Année
  1. « Quelque chose ne va vraiment pas avec les développeurs "modernes" », un développeur à "l'ancienne" critique la multiplication des bibliothèques 82
  2. Apercevoir la troisième dimension ou l'utilisation multithreadée d'OpenGL dans Qt, un article des Qt Quarterly traduit par Guillaume Belz 0
  3. Les développeurs ignorent-ils trop les failles découvertes dans leur code ? Prenez-vous en compte les remarques des autres ? 17
  4. BlackBerry 10 : premières images du prochain OS de RIM qui devrait intégrer des widgets et des tuiles inspirées de Windows Phone 0
  5. Quelles nouveautés de C++11 Visual C++ doit-il rapidement intégrer ? Donnez-nous votre avis 10
  6. Adieu qmake, bienvenue qbs : Qt Building Suite, un outil déclaratif et extensible pour la compilation de projets Qt 17
  7. 2017 : un quinquennat pour une nouvelle version du C++ ? Possible, selon Herb Sutter 6
Page suivante

Le blog Digia au hasard

Logo

Déploiement d'applications Qt Commercial sur les tablettes Windows 8

Le blog Digia est l'endroit privilégié pour la communication sur l'édition commerciale de Qt, où des réponses publiques sont apportées aux questions les plus posées au support. Lire l'article.

Communauté

Ressources

Liens utiles

Contact

  • Vous souhaitez rejoindre la rédaction ou proposer un tutoriel, une traduction, une question... ? Postez dans le forum Contribuez ou contactez-nous par MP ou par email (voir en bas de page).

Qt dans le magazine

Cette page est une traduction d'une page de la documentation de Qt, écrite par Nokia Corporation and/or its subsidiary(-ies). Les éventuels problèmes résultant d'une mauvaise traduction ne sont pas imputables à Nokia. Qt 4.7-snapshot
Copyright © 2012 Developpez LLC. Tous droits réservés Developpez LLC. Aucune reproduction, même partielle, ne peut être faite de ce site et de l'ensemble de son contenu : textes, documents et images sans l'autorisation expresse de Developpez LLC. Sinon, vous encourez selon la loi jusqu'à 3 ans de prison et jusqu'à 300 000 E de dommages et intérêts. Cette page est déposée à la SACD.
Vous avez déniché une erreur ? Un bug ? Une redirection cassée ? Ou tout autre problème, quel qu'il soit ? Ou bien vous désirez participer à ce projet de traduction ? N'hésitez pas à nous contacter ou par MP !
 
 
 
 
Partenaires

Hébergement Web