Painter Paths Example

Window Class Implementation

In the implementation of the Window class we first declare the constant Pi with six significant figures:

 const float Pi = 3.14159f;

In the constructor, we then define the various painter paths and create corresponding RenderArea widgets which will render the graphical shapes:

 Window::Window()
 {
     QPainterPath rectPath;
     rectPath.moveTo(20.0, 30.0);
     rectPath.lineTo(80.0, 30.0);
     rectPath.lineTo(80.0, 70.0);
     rectPath.lineTo(20.0, 70.0);
     rectPath.closeSubpath();

We construct a rectangle with sharp corners using the QPainterPath::moveTo() and QPainterPath::lineTo() functions.

QPainterPath::moveTo() moves the current point to the point passed as argument. A painter path is an object composed of a number of graphical building blocks, i.e. subpaths. Moving the current point will also start a new subpath (implicitly closing the previously current path when the new one is started). The QPainterPath::lineTo() function adds a straight line from the current point to the given end point. After the line is drawn, the current point is updated to be at the end point of the line.

We first move the current point starting a new subpath, and we draw three of the rectangle's sides. Then we call the QPainterPath::closeSubpath() function which draws a line to the beginning of the current subpath. A new subpath is automatically begun when the current subpath is closed. The current point of the new path is (0, 0). We could also have called QPainterPath::lineTo() to draw the last line as well, and then explicitly start a new subpath using the QPainterPath::moveTo() function.

QPainterPath also provide the QPainterPath::addRect() convenience function, which adds a given rectangle to the path as a closed subpath. The rectangle is added as a clockwise set of lines. The painter path's current position after the rect has been added is at the top-left corner of the rectangle.

     QPainterPath roundRectPath;
     roundRectPath.moveTo(80.0, 35.0);
     roundRectPath.arcTo(70.0, 30.0, 10.0, 10.0, 0.0, 90.0);
     roundRectPath.lineTo(25.0, 30.0);
     roundRectPath.arcTo(20.0, 30.0, 10.0, 10.0, 90.0, 90.0);
     roundRectPath.lineTo(20.0, 65.0);
     roundRectPath.arcTo(20.0, 60.0, 10.0, 10.0, 180.0, 90.0);
     roundRectPath.lineTo(75.0, 70.0);
     roundRectPath.arcTo(70.0, 60.0, 10.0, 10.0, 270.0, 90.0);
     roundRectPath.closeSubpath();

Then we construct a rectangle with rounded corners. As before, we use the QPainterPath::moveTo() and QPainterPath::lineTo() functions to draw the rectangle's sides. To create the rounded corners we use the QPainterPath::arcTo() function.

QPainterPath::arcTo() creates an arc that occupies the given rectangle (specified by a QRect or the rectangle's coordinates), beginning at the given start angle and extending the given degrees counter-clockwise. Angles are specified in degrees. Clockwise arcs can be specified using negative angles. The function connects the current point to the starting point of the arc if they are not already connected.

     QPainterPath ellipsePath;
     ellipsePath.moveTo(80.0, 50.0);
     ellipsePath.arcTo(20.0, 30.0, 60.0, 40.0, 0.0, 360.0);

We also use the QPainterPath::arcTo() function to construct the ellipse path. First we move the current point starting a new path. Then we call QPainterPath::arcTo() with starting angle 0.0 and 360.0 degrees as the last argument, creating an ellipse.

Again, QPainterPath provides a convenience function ( QPainterPath::addEllipse()) which creates an ellipse within a given bounding rectangle and adds it to the painter path. If the current subpath is closed, a new subpath is started. The ellipse is composed of a clockwise curve, starting and finishing at zero degrees (the 3 o'clock position).

     QPainterPath piePath;
     piePath.moveTo(50.0, 50.0);
     piePath.arcTo(20.0, 30.0, 60.0, 40.0, 60.0, 240.0);
     piePath.closeSubpath();

When constructing the pie chart path we continue to use a combination of the mentioned functions: First we move the current point, starting a new subpath. Then we create a line from the center of the chart to the arc, and the arc itself. When we close the subpath, we implicitly construct the last line back to the center of the chart.

     QPainterPath polygonPath;
     polygonPath.moveTo(10.0, 80.0);
     polygonPath.lineTo(20.0, 10.0);
     polygonPath.lineTo(80.0, 30.0);
     polygonPath.lineTo(90.0, 70.0);
     polygonPath.closeSubpath();

Constructing a polygon is equivalent to constructing a rectangle.

QPainterPath also provide the QPainterPath::addPolygon() convenience function which adds the given polygon to the path as a new subpath. Current position after the polygon has been added is the last point in polygon.

     QPainterPath groupPath;
     groupPath.moveTo(60.0, 40.0);
     groupPath.arcTo(20.0, 20.0, 40.0, 40.0, 0.0, 360.0);
     groupPath.moveTo(40.0, 40.0);
     groupPath.lineTo(40.0, 80.0);
     groupPath.lineTo(80.0, 80.0);
     groupPath.lineTo(80.0, 40.0);
     groupPath.closeSubpath();

Then we create a path consisting of a group of subpaths: First we move the current point, and create a circle using the QPainterPath::arcTo() function with starting angle 0.0, and 360 degrees as the last argument, as we did when we created the ellipse path. Then we move the current point again, starting a new subpath, and construct three sides of a square using the QPainterPath::lineTo() function.

Now, when we call the QPainterPath::closeSubpath() function the last side is created. Remember that the QPainterPath::closeSubpath() function draws a line to the beginning of the current subpath, i.e the square.

QPainterPath provide a convenience function, QPainterPath::addPath() which adds a given path to the path that calls the function.

     QPainterPath textPath;
     QFont timesFont("Times", 50);
     timesFont.setStyleStrategy(QFont::ForceOutline);
     textPath.addText(10, 70, timesFont, tr("Qt"));

When creating the text path, we first create the font. Then we set the font's style strategy which tells the font matching algorithm what type of fonts should be used to find an appropriate default family. QFont::ForceOutline forces the use of outline fonts.

To construct the text, we use the QPainterPath::addText() function which adds the given text to the path as a set of closed subpaths created from the supplied font. The subpaths are positioned so that the left end of the text's baseline lies at the specified point.

     QPainterPath bezierPath;
     bezierPath.moveTo(20, 30);
     bezierPath.cubicTo(80, 0, 50, 50, 80, 80);

To create the Bezier path, we use the QPainterPath::cubicTo() function which adds a Bezier curve between the current point and the given end point with the given control point. After the curve is added, the current point is updated to be at the end point of the curve.

In this case we omit to close the subpath so that we only have a simple curve. But there is still a logical line from the curve's endpoint back to the beginning of the subpath; it becomes visible when filling the path as can be seen in the applications main window.

     QPainterPath starPath;
     starPath.moveTo(90, 50);
     for (int i = 1; i < 5; ++i) {
         starPath.lineTo(50 + 40 * cos(0.8 * i * Pi),
                         50 + 40 * sin(0.8 * i * Pi));
     }
     starPath.closeSubpath();

The final path that we construct shows that you can use QPainterPath to construct rather complex shapes using only the previous mentioned QPainterPath::moveTo(), QPainterPath::lineTo() and QPainterPath::closeSubpath() functions.

     renderAreas.push_back(new RenderArea(rectPath));
     renderAreas.push_back(new RenderArea(roundRectPath));
     renderAreas.push_back(new RenderArea(ellipsePath));
     renderAreas.push_back(new RenderArea(piePath));
     renderAreas.push_back(new RenderArea(polygonPath));
     renderAreas.push_back(new RenderArea(groupPath));
     renderAreas.push_back(new RenderArea(textPath));
     renderAreas.push_back(new RenderArea(bezierPath));
     renderAreas.push_back(new RenderArea(starPath));

Now that we have created all the painter paths that we need, we create a corresponding RenderArea widget for each. In the end, we make sure that the number of render areas is correct using the Q_ASSERT() macro.

     fillRuleComboBox = new QComboBox;
     fillRuleComboBox->addItem(tr("Odd Even"), Qt::OddEvenFill);
     fillRuleComboBox->addItem(tr("Winding"), Qt::WindingFill);

     fillRuleLabel = new QLabel(tr("Fill &Rule:"));
     fillRuleLabel->setBuddy(fillRuleComboBox);

Then we create the widgets associated with the painter paths' fill rule.

There are two available fill rules in Qt: The Qt::OddEvenFill rule determine whether a point is inside the shape by drawing a horizontal line from the point to a location outside the shape, and count the number of intersections. If the number of intersections is an odd number, the point is inside the shape. This rule is the default.

The Qt::WindingFill rule determine whether a point is inside the shape by drawing a horizontal line from the point to a location outside the shape. Then it determines whether the direction of the line at each intersection point is up or down. The winding number is determined by summing the direction of each intersection. If the number is non zero, the point is inside the shape.

The Qt::WindingFill rule can in most cases be considered as the intersection of closed shapes.

     fillColor1ComboBox = new QComboBox;
     populateWithColors(fillColor1ComboBox);
     fillColor1ComboBox->setCurrentIndex(
             fillColor1ComboBox->findText("mediumslateblue"));

     fillColor2ComboBox = new QComboBox;
     populateWithColors(fillColor2ComboBox);
     fillColor2ComboBox->setCurrentIndex(
             fillColor2ComboBox->findText("cornsilk"));

     fillGradientLabel = new QLabel(tr("&Fill Gradient:"));
     fillGradientLabel->setBuddy(fillColor1ComboBox);

     fillToLabel = new QLabel(tr("to"));
     fillToLabel->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);

     penWidthSpinBox = new QSpinBox;
     penWidthSpinBox->setRange(0, 20);

     penWidthLabel = new QLabel(tr("&Pen Width:"));
     penWidthLabel->setBuddy(penWidthSpinBox);

     penColorComboBox = new QComboBox;
     populateWithColors(penColorComboBox);
     penColorComboBox->setCurrentIndex(
             penColorComboBox->findText("darkslateblue"));

     penColorLabel = new QLabel(tr("Pen &Color:"));
     penColorLabel->setBuddy(penColorComboBox);

     rotationAngleSpinBox = new QSpinBox;
     rotationAngleSpinBox->setRange(0, 359);
     rotationAngleSpinBox->setWrapping(true);
     rotationAngleSpinBox->setSuffix("\xB0");

     rotationAngleLabel = new QLabel(tr("&Rotation Angle:"));
     rotationAngleLabel->setBuddy(rotationAngleSpinBox);

We also create the other widgets associated with the filling, the pen and the rotation angle.

     connect(fillRuleComboBox, SIGNAL(activated(int)),
             this, SLOT(fillRuleChanged()));
     connect(fillColor1ComboBox, SIGNAL(activated(int)),
             this, SLOT(fillGradientChanged()));
     connect(fillColor2ComboBox, SIGNAL(activated(int)),
             this, SLOT(fillGradientChanged()));
     connect(penColorComboBox, SIGNAL(activated(int)),
             this, SLOT(penColorChanged()));

     for(QList<RenderArea*>::iterator it = renderAreas.begin(); it != renderAreas.end(); it++) {
         connect(penWidthSpinBox, SIGNAL(valueChanged(int)),
                 *it, SLOT(setPenWidth(int)));
         connect(rotationAngleSpinBox, SIGNAL(valueChanged(int)),
                 *it, SLOT(setRotationAngle(int)));
     }

We connect the comboboxes activated() signals to the associated slots in the Window class, while we connect the spin boxes valueChanged() signal directly to the RenderArea widget's respective slots.

     QGridLayout *topLayout = new QGridLayout;

     int i=0;
     for(QList<RenderArea*>::iterator it = renderAreas.begin(); it != renderAreas.end(); it++, i++)
         topLayout->addWidget(*it, i / 3, i % 3);

     QGridLayout *mainLayout = new QGridLayout;
     mainLayout->addLayout(topLayout, 0, 0, 1, 4);
     mainLayout->addWidget(fillRuleLabel, 1, 0);
     mainLayout->addWidget(fillRuleComboBox, 1, 1, 1, 3);
     mainLayout->addWidget(fillGradientLabel, 2, 0);
     mainLayout->addWidget(fillColor1ComboBox, 2, 1);
     mainLayout->addWidget(fillToLabel, 2, 2);
     mainLayout->addWidget(fillColor2ComboBox, 2, 3);
     mainLayout->addWidget(penWidthLabel, 3, 0);
     mainLayout->addWidget(penWidthSpinBox, 3, 1, 1, 3);
     mainLayout->addWidget(penColorLabel, 4, 0);
     mainLayout->addWidget(penColorComboBox, 4, 1, 1, 3);
     mainLayout->addWidget(rotationAngleLabel, 5, 0);
     mainLayout->addWidget(rotationAngleSpinBox, 5, 1, 1, 3);
     setLayout(mainLayout);

We add the RenderArea widgets to a separate layout which we then add to the main layout along with the rest of the widgets.

     fillRuleChanged();
     fillGradientChanged();
     penColorChanged();
     penWidthSpinBox->setValue(2);

     setWindowTitle(tr("Painter Paths"));
 }

Finally, we initialize the RenderArea widgets by calling the fillRuleChanged(), fillGradientChanged() and penColorChanged() slots, and we set the initial pen width and window title.

 void Window::fillRuleChanged()
 {
     Qt::FillRule rule = (Qt::FillRule)currentItemData(fillRuleComboBox).toInt();

     for(QList<RenderArea*>::iterator it = renderAreas.begin(); it != renderAreas.end(); it++)
         (*it)->setFillRule(rule);
 }

 void Window::fillGradientChanged()
 {
     QColor color1 = qvariant_cast<QColor>(currentItemData(fillColor1ComboBox));
     QColor color2 = qvariant_cast<QColor>(currentItemData(fillColor2ComboBox));

     for(QList<RenderArea*>::iterator it = renderAreas.begin(); it != renderAreas.end(); it++)
         (*it)->setFillGradient(color1, color2);
 }

 void Window::penColorChanged()
 {
     QColor color = qvariant_cast<QColor>(currentItemData(penColorComboBox));

     for(QList<RenderArea*>::iterator it = renderAreas.begin(); it != renderAreas.end(); it++)
         (*it)->setPenColor(color);
 }

The private slots are implemented to retrieve the new value, or values, from the associated comboboxes and update the RenderArea widgets.

First we determine the new value, or values, using the private currentItemData() function and the qvariant_cast() template function. Then we call the associated slot for each of the RenderArea widgets to update the painter paths.

 void Window::populateWithColors(QComboBox *comboBox)
 {
     QStringList colorNames = QColor::colorNames();
     foreach (QString name, colorNames)
         comboBox->addItem(name, QColor(name));
 }

The populateWithColors() function populates the given combobox with items corresponding to the color names Qt knows about provided by the static QColor::colorNames() function.

 QVariant Window::currentItemData(QComboBox *comboBox)
 {
     return comboBox->itemData(comboBox->currentIndex());
 }

The currentItemData() function simply return the current item of the given combobox.

 class RenderArea : public QWidget
 {
     Q_OBJECT

 public:
     RenderArea(const QPainterPath &path, QWidget *parent = 0);

     QSize minimumSizeHint() const;
     QSize sizeHint() const;

 public slots:
     void setFillRule(Qt::FillRule rule);
     void setFillGradient(const QColor &color1, const QColor &color2);
     void setPenWidth(int width);
     void setPenColor(const QColor &color);
     void setRotationAngle(int degrees);

 protected:
     void paintEvent(QPaintEvent *event);

 private:
     QPainterPath path;
     QColor fillColor1;
     QColor fillColor2;
     int penWidth;
     QColor penColor;
     int rotationAngle;
 };

 RenderArea::RenderArea(const QPainterPath &path, QWidget *parent)
     : QWidget(parent), path(path)
 {
     penWidth = 1;
     rotationAngle = 0;
     setBackgroundRole(QPalette::Base);
 }

 QSize RenderArea::minimumSizeHint() const
 {
     return QSize(50, 50);
 }

 QSize RenderArea::sizeHint() const
 {
     return QSize(100, 100);
 }

 void RenderArea::setFillRule(Qt::FillRule rule)
 {
     path.setFillRule(rule);
     update();
 }

 void RenderArea::setFillGradient(const QColor &color1, const QColor &color2)
 {
     fillColor1 = color1;
     fillColor2 = color2;
     update();
 }

 void RenderArea::setPenWidth(int width)
 {
     penWidth = width;
     update();
 }

 void RenderArea::setPenColor(const QColor &color)
 {
     penColor = color;
     update();
 }

 void RenderArea::setRotationAngle(int degrees)
 {
     rotationAngle = degrees;
     update();
 }

 void RenderArea::paintEvent(QPaintEvent *)
 {
     QPainter painter(this);
     painter.setRenderHint(QPainter::Antialiasing);

     painter.scale(width() / 100.0, height() / 100.0);
     painter.translate(50.0, 50.0);
     painter.rotate(-rotationAngle);
     painter.translate(-50.0, -50.0);

     painter.setPen(QPen(penColor, penWidth, Qt::SolidLine, Qt::RoundCap,
                         Qt::RoundJoin));
     QLinearGradient gradient(0, 0, 0, 100);
     gradient.setColorAt(0.0, fillColor1);
     gradient.setColorAt(1.0, fillColor2);
     painter.setBrush(gradient);
     painter.drawPath(path);
 }