|
|
              
QMagnetometerReading ClassThe QMagnetometerReading class represents one reading from the magnetometer. More... #include <QMagnetometerReading>Inherits: QSensorReading. QMagnetometerReading is instantiated by QML element MagnetometerReading Properties
Public Functions
Additional Inherited Members
Detailed DescriptionThe QMagnetometerReading class represents one reading from the magnetometer. QMagnetometerReading UnitsThe magnetometer returns magnetic flux density values along 3 axes. The scale of the values is teslas. The axes are arranged as follows.
The magnetometer can report on either raw magnetic flux values or geomagnetic flux values. By default it returns raw magnetic flux values. The QMagnetometer::returnGeoValues property must be set to return geomagnetic flux values. The primary difference between raw and geomagnetic values is that extra processing is done to eliminate local magnetic interference from the geomagnetic values so they represent only the effect of the Earth's magnetic field. This process is not perfect and the accuracy of each reading may change. The image below shows the difference between geomagnetic (on the left) and raw (on the right) readings for a phone that is being subjected to magnetic interference.
The accuracy of each reading is measured as a number from 0 to 1. A value of 1 is the highest level that the device can support and 0 is the worst. See also CS001671 - Calibrating the magnetometer sensor. Property Documentation
|
| qreal | calibrationLevel() const |
See also QMagnetometerReading Units and CS001671 - Calibrating the magnetometer sensor.
x : const qreal
This property holds the raw magnetic flux density on the X axis.
Measured as telsas.
Access functions:
| qreal | x() const |
See also QMagnetometerReading Units.
y : const qreal
This property holds the raw magnetic flux density on the Y axis.
Measured as telsas.
Access functions:
| qreal | y() const |
See also QMagnetometerReading Units.
z : const qreal
This property holds the raw magnetic flux density on the Z axis.
Measured as telsas.
Access functions:
| qreal | z() const |
See also QMagnetometerReading Units.
Member Function Documentation
void QMagnetometerReading::setCalibrationLevel(qreal calibrationLevel)
Sets the accuracy of the reading to calibrationLevel.
See also calibrationLevel().
void QMagnetometerReading::setX(qreal x)
Sets the raw magnetic flux density on the X axis to x.
See also x().
void QMagnetometerReading::setY(qreal y)
Sets the raw magnetic flux density on the Y axis to y.
See also y().
void QMagnetometerReading::setZ(qreal z)
Sets the raw magnetic flux density on the Z axis to z.
See also z().