contactlistpage.cpp Example File

 /****************************************************************************
 **
 ** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
 ** All rights reserved.
 ** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the examples of the Qt Mobility Components.
 **
 ** $QT_BEGIN_LICENSE:BSD$
 ** You may use this file under the terms of the BSD license as follows:
 **
 ** "Redistribution and use in source and binary forms, with or without
 ** modification, are permitted provided that the following conditions are
 ** met:
 **   * Redistributions of source code must retain the above copyright
 **     notice, this list of conditions and the following disclaimer.
 **   * Redistributions in binary form must reproduce the above copyright
 **     notice, this list of conditions and the following disclaimer in
 **     the documentation and/or other materials provided with the
 **     distribution.
 **   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
 **     the names of its contributors may be used to endorse or promote
 **     products derived from this software without specific prior written
 **     permission.
 **
 ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/

 #include "contactlistpage.h"
 #ifdef BUILD_VERSIT
 #include "qversitreader.h"
 #include "qversitcontactimporter.h"
 #include "qversitwriter.h"
 #include "qversitcontactexporter.h"
 #include <QDesktopServices>
 #endif

 #include <QtGui>

 ContactListPage::ContactListPage(QMainWindow *mainWindow, QWidget *parent)
         : QWidget(parent), m_mainWindow(mainWindow)
 {
     m_manager = 0;
     m_currentFilter = QContactFilter();

     m_backendsCombo = new QComboBox(this);
     QStringList availableManagers = QContactManager::availableManagers();
     availableManagers.removeAll("invalid");
     foreach(QString managerName, availableManagers) {

         QMap<QString, QString> params;
         QString managerUri = QContactManager::buildUri(managerName, params);

         // Add some parameters to SIM backend so that we can use
         // all the stores.
         if (managerName == "symbiansim") {
             availableManagers.removeAll("symbiansim");

             availableManagers.append("symbiansim:adn");
             params.insert("store", "ADN");
             managerUri = QContactManager::buildUri(managerName, params);
             m_availableManagers.insert(availableManagers.last(), managerUri);

             availableManagers.append("symbiansim:fdn");
             params.clear();
             params.insert("store", "FDN");
             managerUri = QContactManager::buildUri(managerName, params);
             m_availableManagers.insert(availableManagers.last(), managerUri);

             availableManagers.append("symbiansim:sdn");
             params.clear();
             params.insert("store", "SDN");
             managerUri = QContactManager::buildUri(managerName, params);
             m_availableManagers.insert(availableManagers.last(), managerUri);
         }
         else {
             m_availableManagers.insert(managerName, managerUri);
         }
     }
     m_backendsCombo->addItems(availableManagers);
     connect(m_backendsCombo, SIGNAL(currentIndexChanged(QString)), this, SLOT(backendSelected()));
     m_filterActiveLabel = new QLabel(tr("Filter active"));
     m_filterActiveLabel->setSizePolicy(QSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed));

     QVBoxLayout *bookLayout = new QVBoxLayout;
     QFormLayout *backendLayout = new QFormLayout;
     backendLayout->addRow(tr("Store:"), m_backendsCombo);
     backendLayout->addRow(m_filterActiveLabel);
     bookLayout->addLayout(backendLayout);

     m_contactsList = new QListWidget(this);
     bookLayout->addWidget(m_contactsList);

     // Action buttons at the bottom
     QHBoxLayout *btnLayout1 = new QHBoxLayout;

     QPushButton* addBtn = new QPushButton(tr("&Add"), this);
     connect(addBtn, SIGNAL(clicked()), this, SLOT(addClicked()));
     btnLayout1->addWidget(addBtn);

     QPushButton* editBtn = new QPushButton(tr("&Edit"), this);
     connect(editBtn, SIGNAL(clicked()), this, SLOT(editClicked()));
     btnLayout1->addWidget(editBtn);

     QPushButton* deleteBtn = new QPushButton(tr("&Delete"), this);
     connect(deleteBtn, SIGNAL(clicked()), this, SLOT(deleteClicked()));
     btnLayout1->addWidget(deleteBtn);

     bookLayout->addLayout(btnLayout1);

     setLayout(bookLayout);

     // Add items to the menu
     if (m_mainWindow) {
 #if defined(Q_OS_SYMBIAN) || defined(Q_WS_MAEMO_5) || defined(Q_OS_WINCE)
         // These platforms need their menu items added directly to the menu bar.
         QMenuBar *optionsMenu = m_mainWindow->menuBar();
 #else
         QMenu *optionsMenu = new QMenu(tr("&Contacts"), this);
         m_mainWindow->menuBar()->addMenu(optionsMenu);
 #endif
         QAction* filterAction = new QAction(tr("Apply &Filter..."), this);
         connect(filterAction, SIGNAL(triggered()), this, SLOT(filterClicked()));
         optionsMenu->addAction(filterAction);
         QAction* clearFilterAction = new QAction(tr("&Clear Filter"), this);
         connect(clearFilterAction, SIGNAL(triggered()), this, SIGNAL(clearFilter()));
         optionsMenu->addAction(clearFilterAction);
         optionsMenu->addSeparator();

 #ifdef BUILD_VERSIT
         QAction* importAction = new QAction(tr("&Import contacts..."), this);
         connect(importAction, SIGNAL(triggered()), this, SLOT(importClicked()));
         optionsMenu->addAction(importAction);
         QAction* exportAction = new QAction(tr("Ex&port contacts..."), this);
         connect(exportAction, SIGNAL(triggered()), this, SLOT(exportClicked()));
         optionsMenu->addAction(exportAction);
         optionsMenu->addSeparator();
 #endif
 #if !(defined(Q_WS_MAEMO_5) || defined(Q_WS_MAEMO_6))
         // Maemo applications don't have an Exit button in the menu.
         QAction* exitAction = new QAction(tr("E&xit"), this);
         connect(exitAction, SIGNAL(triggered()), qApp, SLOT(quit()));
         optionsMenu->addAction(exitAction);
 #endif
     }

     // force update to backend.
     QTimer::singleShot(0, this, SLOT(backendSelected()));
 }

 ContactListPage::~ContactListPage()
 {
     QList<QContactManager*> initialisedManagers = m_initialisedManagers.values();
     while (!initialisedManagers.isEmpty()) {
         QContactManager *deleteMe = initialisedManagers.takeFirst();
         delete deleteMe;
     }
 }

 void ContactListPage::backendSelected()
 {
     QString managerUri = m_availableManagers.value(m_backendsCombo->currentText());

     // first, check to see if they reselected the same backend.
     if (m_manager && m_manager->managerUri() == managerUri)
         return;

     if (m_manager)
         disconnect(m_manager, 0, this, 0); // we no longer want updates from the old manager

     // the change is real.  update.
     if (m_initialisedManagers.contains(managerUri)) {
         m_manager = m_initialisedManagers.value(managerUri);
     } else {
         m_manager = QContactManager::fromUri(managerUri);
         if (m_manager->error()) {
             QMessageBox::information(this, tr("Failed!"), QString("Failed to open store!\n(error code %1)").arg(m_manager->error()));
             delete m_manager;
             m_manager = 0;
             return;
         }
         m_initialisedManagers.insert(managerUri, m_manager);
     }

     connect(m_manager, SIGNAL(contactsAdded(const QList<QContactLocalId>&)),
             this, SLOT(contactsAdded(const QList<QContactLocalId>&)));
     connect(m_manager, SIGNAL(contactsRemoved(const QList<QContactLocalId>&)),
             this, SLOT(contactsRemoved(const QList<QContactLocalId>&)));
     connect(m_manager, SIGNAL(contactsChanged(const QList<QContactLocalId>&)),
             this, SLOT(contactsChanged(const QList<QContactLocalId>&)));

     // signal that the manager has changed.
     emit managerChanged(m_manager);

     // and... rebuild the list.
     rebuildList(m_currentFilter);
 }

 void ContactListPage::rebuildList(const QContactFilter& filter)
 {
     m_currentFilter = QContactManagerEngine::canonicalizedFilter(filter);

     m_filterActiveLabel->setVisible(m_currentFilter != QContactFilter());

     m_contactsList->clear();
     m_contacts = m_manager->contacts(m_currentFilter);
     foreach (QContact contact, m_contacts) {
         QListWidgetItem *currItem = new QListWidgetItem;
         currItem->setData(Qt::DisplayRole, contact.displayLabel());
         currItem->setData(Qt::UserRole, contact.localId()); // also store the id of the contact.
         m_contactsList->addItem(currItem);
     }
 }

 void ContactListPage::contactsAdded(const QList<QContactLocalId>& ids)
 {
     QContactIntersectionFilter qcif;
     QContactLocalIdFilter qclif;
     qclif.setIds(ids);
     qcif.append(qclif);
     qcif.append(m_currentFilter);
     m_contacts = m_manager->contacts(qcif);
     foreach (QContact contact, m_contacts) {
         QListWidgetItem *currItem = new QListWidgetItem;
         currItem->setData(Qt::DisplayRole, contact.displayLabel());
         currItem->setData(Qt::UserRole, contact.localId()); // also store the id of the contact.
         m_contactsList->addItem(currItem);
     }
 }

 void ContactListPage::contactsRemoved(const QList<QContactLocalId>& ids)
 {
     int i = 0;
     while (i < m_contactsList->count()) {
         if (ids.contains(m_contactsList->item(i)->data(Qt::UserRole).toUInt())) {
             delete m_contactsList->takeItem(i);
         } else {
             i++;
         }
     }
     i = 0;
     while (i < m_contacts.count()) {
         if (ids.contains(m_contacts[i].localId())) {
             m_contacts.removeAt(i);
         } else {
             i++;
         }
     }
 }

 void ContactListPage::contactsChanged(const QList<QContactLocalId>& ids)
 {
     int i = 0;
     QMap<QContactLocalId, QContact> updatedContacts;
     foreach (QContactLocalId id, ids) {
         QContact contact = m_manager->contact(id);
         updatedContacts.insert(id, contact);
     }

     for (i = 0; i < m_contactsList->count(); i++) {
         QListWidgetItem* currItem = m_contactsList->item(i);
         QContactLocalId lid = currItem->data(Qt::UserRole).toUInt();
         if (updatedContacts.contains(lid)) {
             currItem->setData(Qt::DisplayRole, updatedContacts.value(lid).displayLabel());
         }
     }

     for (i = 0; i < m_contacts.count(); i++) {
         QContactLocalId lid = m_contacts[i].localId();
         if (updatedContacts.contains(lid)) {
             m_contacts[i] = updatedContacts.value(lid);
         }
     }
 }

 void ContactListPage::dataChanged()
 {
     rebuildList(m_currentFilter);
 }

 void ContactListPage::addClicked()
 {
     if (m_manager)
         emit showEditorPage(QContactLocalId(0));
 }

 void ContactListPage::editClicked()
 {
     if (m_contactsList->currentItem())
         emit showEditorPage(QContactLocalId(m_contactsList->currentItem()->data(Qt::UserRole).toUInt()));
     // else, nothing selected; ignore.
 }

 void ContactListPage::filterClicked()
 {
     if (m_manager)
         emit showFilterPage(m_currentFilter);
 }

 void ContactListPage::deleteClicked()
 {
     if (!m_manager) {
         qWarning() << "No manager selected; cannot delete.";
         return;
     }

     if (!m_contactsList->currentItem()) {
         qWarning() << "Nothing to delete.";
         return;
     }

     QContactLocalId contactId = QContactLocalId(m_contactsList->currentItem()->data(Qt::UserRole).toUInt());
     bool success = m_manager->removeContact(contactId);
     if (success) {
         // no need to do this here - we can wait for the signal to get through to contactsRemoved()
         // delete m_contactsList->takeItem(m_contactsList->currentRow());
     }
     else
         QMessageBox::information(this, "Failed!", "Failed to delete contact!");
 }

 void ContactListPage::importClicked()
 {
 #ifdef BUILD_VERSIT
     if (!m_manager) {
         qWarning() << "No manager selected; cannot import";
         return;
     }
     QString docPath = QDesktopServices::storageLocation(QDesktopServices::DocumentsLocation);
     if (docPath.isEmpty())
         docPath = QDesktopServices::storageLocation(QDesktopServices::HomeLocation);
     if (docPath.isEmpty())
         docPath = ".";
     QString fileName = QFileDialog::getOpenFileName(this,
        tr("Select vCard file"), docPath, tr("vCard files (*.vcf)"));

     if (!fileName.isEmpty()) {
         QFile file(fileName);
         file.open(QIODevice::ReadOnly);
         bool success = false;
         if (file.isReadable()) {
             QVersitReader reader;
             reader.setDevice(&file);
             if (reader.startReading() && reader.waitForFinished()) {
                 QVersitContactImporter importer;
                 if (importer.importDocuments(reader.results())) {
                     QList<QContact> contacts = importer.contacts();
                     qDebug() << "Contacts imported: " << contacts;
                     QMap<int, QContactManager::Error> errorMap;
                     QList<QContact>::iterator it = contacts.begin();
                     while (it != contacts.end()) {
                         *it = m_manager->compatibleContact(*it);
                         it++;
                     }
                     if (contacts.count() > 0)
                         success = m_manager->saveContacts(&contacts, &errorMap);
                     //rebuildList(m_currentFilter);
                 }
             }
         }

         // We could be more specific, probably
         if (!success)
             QMessageBox::warning(this, tr("Error importing vCard"), tr("Unable to import vCard file.  Check that the file exists and is valid."));
     }
 #endif
 }

 void ContactListPage::exportClicked()
 {
 #ifdef BUILD_VERSIT
     if (!m_manager) {
         qWarning() << "No manager selected; cannot export";
         return;
     }
     qDebug() << "Exporting contacts: " << m_contacts;
     QString docPath = QDesktopServices::storageLocation(QDesktopServices::DocumentsLocation);
     if (docPath.isEmpty())
         docPath = QDesktopServices::storageLocation(QDesktopServices::HomeLocation);
     if (docPath.isEmpty())
         docPath = ".";
     docPath.append("/contacts.vcf");
     QString fileName = QFileDialog::getSaveFileName(this, tr("Save vCard"),
                                                     docPath,
                                                     tr("vCards (*.vcf)"));

     if (!fileName.isEmpty()) {
         bool success = false;
         QFile file(fileName);
         file.open(QIODevice::WriteOnly);
         if (file.isWritable()) {
             QVersitContactExporter exporter;
             if(exporter.exportContacts(m_contacts, QVersitDocument::VCard30Type)) {
                 QList<QVersitDocument> documents = exporter.documents();
                 QVersitWriter writer;
                 writer.setDevice(&file);
                 writer.startWriting(documents);
                 writer.waitForFinished();
                 success = (writer.error() == QVersitWriter::NoError);
             }
         }

         if (!success)
             QMessageBox::warning(this, tr("Error saving vCard"), tr("Unable to save vCard file.  Check that the path specified is writable."));
     }
 #endif
 }