              
QNetworkAccessManager Class Reference |
| enum | Operation { HeadOperation, GetOperation, PutOperation, PostOperation, DeleteOperation } |
Public Functions
| QNetworkAccessManager ( QObject * parent = 0 ) | |
| ~QNetworkAccessManager () | |
| QAbstractNetworkCache * | cache () const |
| QNetworkCookieJar * | cookieJar () const |
| QNetworkReply * | deleteResource ( const QNetworkRequest & request ) |
| QNetworkReply * | get ( const QNetworkRequest & request ) |
| QNetworkReply * | head ( const QNetworkRequest & request ) |
| QNetworkReply * | post ( const QNetworkRequest & request, QIODevice * data ) |
| QNetworkReply * | post ( const QNetworkRequest & request, const QByteArray & data ) |
| QNetworkProxy | proxy () const |
| QNetworkProxyFactory * | proxyFactory () const |
| QNetworkReply * | put ( const QNetworkRequest & request, QIODevice * data ) |
| QNetworkReply * | put ( const QNetworkRequest & request, const QByteArray & data ) |
| void | setCache ( QAbstractNetworkCache * cache ) |
| void | setCookieJar ( QNetworkCookieJar * cookieJar ) |
| void | setProxy ( const QNetworkProxy & proxy ) |
| void | setProxyFactory ( QNetworkProxyFactory * factory ) |
- 29 public functions inherited from QObject
Signals
| void | authenticationRequired ( QNetworkReply * reply, QAuthenticator * authenticator ) |
| void | finished ( QNetworkReply * reply ) |
| void | proxyAuthenticationRequired ( const QNetworkProxy & proxy, QAuthenticator * authenticator ) |
| void | sslErrors ( QNetworkReply * reply, const QList<QSslError> & errors ) |
- 1 signal inherited from QObject
Protected Functions
| virtual QNetworkReply * | createRequest ( Operation op, const QNetworkRequest & req, QIODevice * outgoingData = 0 ) |
- 7 protected functions inherited from QObject
Additional Inherited Members
- 1 property inherited from QObject
- 1 public slot inherited from QObject
- 5 static public members inherited from QObject
Detailed Description
The QNetworkAccessManager class allows the application to send network requests and receive replies
The Network Access API is constructed around one QNetworkAccessManager object, which holds the common configuration and settings for the requests it sends. It contains the proxy and cache configuration, as well as the signals related to such issues, and reply signals that can be used to monitor the progress of a network operation. One QNetworkAccessManager should be enough for the whole Qt application.
Once a QNetworkAccessManager object has been created, the application can use it to send requests over the network. A group of standard functions are supplied that take a request and optional data, and each return a QNetworkReply object. The returned object is used to obtain any data returned in response to the corresponding request.
A simple download off the network could be accomplished with:
QNetworkAccessManager *manager = new QNetworkAccessManager(this);
connect(manager, SIGNAL(finished(QNetworkReply*)),
this, SLOT(replyFinished(QNetworkReply*)));
manager->get(QNetworkRequest(QUrl("http://qt.nokia.com")));
QNetworkAccessManager has an asynchronous API. When the replyFinished slot above is called, the parameter it takes is the QNetworkReply object containing the downloaded data as well as meta-data (headers, etc.).
Note: After the request has finished, it is the responsibility of the user to delete the QNetworkReply object at an appropriate time. Do not directly delete it inside the slot connected to finished(). You can use the deleteLater() function.
Note: QNetworkAccessManager queues the requests it receives. The number of requests executed in parallel is dependent on the protocol. Currently, for the HTTP protocol on desktop platforms, 6 requests are executed in parallel for one host/port combination.
A more involved example, assuming the manager is already existent, can be:
QNetworkRequest request;
request.setUrl(QUrl("http://qt.nokia.com"));
request.setRawHeader("User-Agent", "MyOwnBrowser 1.0");
QNetworkReply *reply = manager->get(request);
connect(reply, SIGNAL(readyRead()), this, SLOT(slotReadyRead()));
connect(reply, SIGNAL(error(QNetworkReply::NetworkError)),
this, SLOT(slotError(QNetworkReply::NetworkError)));
connect(reply, SIGNAL(sslErrors(QList<QSslError>)),
this, SLOT(slotSslErrors(QList<QSslError>)));
Symbian Platform Security Requirements
On Symbian, processes which use this class must have the NetworkServices platform security capability. If the client process lacks this capability, operations will result in a panic.
Platform security capabilities are added via the TARGET.CAPABILITY qmake variable.
See also QNetworkRequest, QNetworkReply, and QNetworkProxy.
Member Type Documentation
enum QNetworkAccessManager::Operation
Indicates the operation this reply is processing.
| Constant | Value | Description |
|---|---|---|
| QNetworkAccessManager::HeadOperation | 1 | retrieve headers operation (created with head()) |
| QNetworkAccessManager::GetOperation | 2 | retrieve headers and download contents (created with get()) |
| QNetworkAccessManager::PutOperation | 3 | upload contents operation (created with put()) |
| QNetworkAccessManager::PostOperation | 4 | send the contents of an HTML form for processing via HTTP POST (created with post()) |
| QNetworkAccessManager::DeleteOperation | 5 | delete contents operation (created with deleteResource()) |
See also QNetworkReply::operation().
Member Function Documentation
QNetworkAccessManager::QNetworkAccessManager ( QObject * parent = 0 )
Constructs a QNetworkAccessManager object that is the center of the Network Access API and sets parent as the parent object.
QNetworkAccessManager::~QNetworkAccessManager ()
Destroys the QNetworkAccessManager object and frees up any resources. Note that QNetworkReply objects that are returned from this class have this object set as their parents, which means that they will be deleted along with it if you don't call QObject::setParent() on them.
void QNetworkAccessManager::authenticationRequired ( QNetworkReply * reply, QAuthenticator * authenticator ) [signal]
This signal is emitted whenever a final server requests authentication before it delivers the requested contents. The slot connected to this signal should fill the credentials for the contents (which can be determined by inspecting the reply object) in the authenticator object.
QNetworkAccessManager will cache the credentials internally and will send the same values if the server requires authentication again, without emitting the authenticationRequired() signal. If it rejects the credentials, this signal will be emitted again.
See also proxyAuthenticationRequired().
QAbstractNetworkCache * QNetworkAccessManager::cache () const
Returns the cache that is used to store data obtained from the network.
This function was introduced in Qt 4.5.
See also setCache().
QNetworkCookieJar * QNetworkAccessManager::cookieJar () const
Returns the QNetworkCookieJar that is used to store cookies obtained from the network as well as cookies that are about to be sent.
See also setCookieJar().
QNetworkReply * QNetworkAccessManager::createRequest ( Operation op, const QNetworkRequest & req, QIODevice * outgoingData = 0 ) [virtual protected]
Returns a new QNetworkReply object to handle the operation op and request req. The device outgoingData is always 0 for Get and Head requests, but is the value passed to post() and put() in those operations (the QByteArray variants will pass a QBuffer object).
The default implementation calls QNetworkCookieJar::cookiesForUrl() on the cookie jar set with setCookieJar() to obtain the cookies to be sent to the remote server.
The returned object must be in an open state.
QNetworkReply * QNetworkAccessManager::deleteResource ( const QNetworkRequest & request )
Sends a request to delete the resource identified by the URL of request.
Note: This feature is currently available for HTTP only, performing an HTTP DELETE request.
This function was introduced in Qt 4.6.
See also get(), post(), and put().
void QNetworkAccessManager::finished ( QNetworkReply * reply ) [signal]
This signal is emitted whenever a pending network reply is finished. The reply parameter will contain a pointer to the reply that has just finished. This signal is emitted in tandem with the QNetworkReply::finished() signal.
See QNetworkReply::finished() for information on the status that the object will be in.
Note: Do not delete the reply object in the slot connected to this signal. Use deleteLater().
See also QNetworkReply::finished() and QNetworkReply::error().
QNetworkReply * QNetworkAccessManager::get ( const QNetworkRequest & request )
Posts a request to obtain the contents of the target request and returns a new QNetworkReply object opened for reading which emits the readyRead() signal whenever new data arrives.
The contents as well as associated headers will be downloaded.
See also post(), put(), and deleteResource().
QNetworkReply * QNetworkAccessManager::head ( const QNetworkRequest & request )
Posts a request to obtain the network headers for request and returns a new QNetworkReply object which will contain such headers.
The function is named after the HTTP request associated (HEAD).
QNetworkReply * QNetworkAccessManager::post ( const QNetworkRequest & request, QIODevice * data )
Sends an HTTP POST request to the destination specified by request and returns a new QNetworkReply object opened for reading that will contain the reply sent by the server. The contents of the data device will be uploaded to the server.
data must be open for reading and must remain valid until the finished() signal is emitted for this reply.
Note: Sending a POST request on protocols other than HTTP and HTTPS is undefined and will probably fail.
See also get(), put(), and deleteResource().
QNetworkReply * QNetworkAccessManager::post ( const QNetworkRequest & request, const QByteArray & data )
This is an overloaded function.
Sends the contents of the data byte array to the destination specified by request.
QNetworkProxy QNetworkAccessManager::proxy () const
Returns the QNetworkProxy that the requests sent using this QNetworkAccessManager object will use. The default value for the proxy is QNetworkProxy::DefaultProxy.
See also setProxy(), setProxyFactory(), and proxyAuthenticationRequired().
void QNetworkAccessManager::proxyAuthenticationRequired ( const QNetworkProxy & proxy, QAuthenticator * authenticator ) [signal]
This signal is emitted whenever a proxy requests authentication and QNetworkAccessManager cannot find a valid, cached credential. The slot connected to this signal should fill in the credentials for the proxy proxy in the authenticator object.
QNetworkAccessManager will cache the credentials internally. The next time the proxy requests authentication, QNetworkAccessManager will automatically send the same credential without emitting the proxyAuthenticationRequired signal again.
If the proxy rejects the credentials, QNetworkAccessManager will emit the signal again.
See also proxy(), setProxy(), and authenticationRequired().
QNetworkProxyFactory * QNetworkAccessManager::proxyFactory () const
Returns the proxy factory that this QNetworkAccessManager object is using to determine the proxies to be used for requests.
Note that the pointer returned by this function is managed by QNetworkAccessManager and could be deleted at any time.
This function was introduced in Qt 4.5.
See also setProxyFactory() and proxy().
QNetworkReply * QNetworkAccessManager::put ( const QNetworkRequest & request, QIODevice * data )
Uploads the contents of data to the destination request and returnes a new QNetworkReply object that will be open for reply.
data must be opened for reading when this function is called and must remain valid until the finished() signal is emitted for this reply.
Whether anything will be available for reading from the returned object is protocol dependent. For HTTP, the server may send a small HTML page indicating the upload was successful (or not). Other protocols will probably have content in their replies.
Note: For HTTP, this request will send a PUT request, which most servers do not allow. Form upload mechanisms, including that of uploading files through HTML forms, use the POST mechanism.
QNetworkReply * QNetworkAccessManager::put ( const QNetworkRequest & request, const QByteArray & data )
This is an overloaded function.
Sends the contents of the data byte array to the destination specified by request.
void QNetworkAccessManager::setCache ( QAbstractNetworkCache * cache )
Sets the manager's network cache to be the cache specified. The cache is used for all requests dispatched by the manager.
Use this function to set the network cache object to a class that implements additional features, like saving the cookies to permanent storage.
Note: QNetworkAccessManager takes ownership of the cache object.
QNetworkAccessManager by default does not have a set cache. Qt provides a simple disk cache, QNetworkDiskCache, which can be used.
This function was introduced in Qt 4.5.
See also cache() and QNetworkRequest::CacheLoadControl.
void QNetworkAccessManager::setCookieJar ( QNetworkCookieJar * cookieJar )
Sets the manager's cookie jar to be the cookieJar specified. The cookie jar is used by all requests dispatched by the manager.
Use this function to set the cookie jar object to a class that implements additional features, like saving the cookies to permanent storage.
Note: QNetworkAccessManager takes ownership of the cookieJar object.
QNetworkAccessManager will set the parent of the cookieJar passed to itself, so that the cookie jar is deleted when this object is deleted as well. If you want to share cookie jars between different QNetworkAccessManager objects, you may want to set the cookie jar's parent to 0 after calling this function.
QNetworkAccessManager by default does not implement any cookie policy of its own: it accepts all cookies sent by the server, as long as they are well formed and meet the minimum security requirements (cookie domain matches the request's and cookie path matches the request's). In order to implement your own security policy, override the QNetworkCookieJar::cookiesForUrl() and QNetworkCookieJar::setCookiesFromUrl() virtual functions. Those functions are called by QNetworkAccessManager when it detects a new cookie.
See also cookieJar(), QNetworkCookieJar::cookiesForUrl(), and QNetworkCookieJar::setCookiesFromUrl().
void QNetworkAccessManager::setProxy ( const QNetworkProxy & proxy )
Sets the proxy to be used in future requests to be proxy. This does not affect requests that have already been sent. The proxyAuthenticationRequired() signal will be emitted if the proxy requests authentication.
A proxy set with this function will be used for all requests issued by QNetworkAccessManager. In some cases, it might be necessary to select different proxies depending on the type of request being sent or the destination host. If that's the case, you should consider using setProxyFactory().
See also proxy() and proxyAuthenticationRequired().
void QNetworkAccessManager::setProxyFactory ( QNetworkProxyFactory * factory )
Sets the proxy factory for this class to be factory. A proxy factory is used to determine a more specific list of proxies to be used for a given request, instead of trying to use the same proxy value for all requests.
All queries sent by QNetworkAccessManager will have type QNetworkProxyQuery::UrlRequest.
For example, a proxy factory could apply the following rules:
- if the target address is in the local network (for example, if the hostname contains no dots or if it's an IP address in the organization's range), return QNetworkProxy::NoProxy
- if the request is FTP, return an FTP proxy
- if the request is HTTP or HTTPS, then return an HTTP proxy
- otherwise, return a SOCKSv5 proxy server
The lifetime of the object factory will be managed by QNetworkAccessManager. It will delete the object when necessary.
Note: If a specific proxy is set with setProxy(), the factory will not be used.
This function was introduced in Qt 4.5.
See also proxyFactory(), setProxy(), and QNetworkProxyQuery.
void QNetworkAccessManager::sslErrors ( QNetworkReply * reply, const QList<QSslError> & errors ) [signal]
This signal is emitted if the SSL/TLS session encountered errors during the set up, including certificate verification errors. The errors parameter contains the list of errors and reply is the QNetworkReply that is encountering these errors.
To indicate that the errors are not fatal and that the connection should proceed, the QNetworkReply::ignoreSslErrors() function should be called from the slot connected to this signal. If it is not called, the SSL session will be torn down before any data is exchanged (including the URL).
This signal can be used to display an error message to the user indicating that security may be compromised and display the SSL settings (see sslConfiguration() to obtain it). If the user decides to proceed after analyzing the remote certificate, the slot should call ignoreSslErrors().
See also QSslSocket::sslErrors(), QNetworkReply::sslErrors(), QNetworkReply::sslConfiguration(), and QNetworkReply::ignoreSslErrors().
Best Of
Actualités les plus lues
- « Quelque chose ne va vraiment pas avec les développeurs "modernes" », un développeur à "l'ancienne" critique la multiplication des bibliothèques 46
- Quelles nouveautés de C++11 Visual C++ doit-il rapidement intégrer ? Donnez-nous votre avis 10
- Créer des applications avec un style Metro avec Qt, exemples en QML et C++, un article du blog Digia traduit par Thibaut Cuvelier 0
- Orientation de l'écran en QML, un article de Christophe Dumez traduit par Thibaut Cuvelier 0
- « Quelque chose ne va vraiment pas avec les développeurs "modernes" », un développeur à "l'ancienne" critique la multiplication des bibliothèques 44
- Les développeurs ignorent-ils trop les failles découvertes dans leur code ? Prenez-vous en compte les remarques des autres ? 17
- BlackBerry 10 : premières images du prochain OS de RIM qui devrait intégrer des widgets et des tuiles inspirées de Windows Phone 0
- Quelles nouveautés de C++11 Visual C++ doit-il rapidement intégrer ? Donnez-nous votre avis 10
- Adieu qmake, bienvenue qbs : Qt Building Suite, un outil déclaratif et extensible pour la compilation de projets Qt 17
- La rubrique Qt a besoin de vous ! 1
- La rubrique PyQt/PySide a besoin de vous ! 0
- Linus Torvalds : le "C++ est un langage horrible", en justifiant le choix du C pour le système de gestion de version Git 100
- Comment prendre en compte l'utilisateur dans vos applications ? Pour un développeur, « 90 % des utilisateurs sont des idiots » 229
- Quel est LE livre que tout développeur doit lire absolument ? Celui qui vous a le plus marqué et inspiré 96
- Apple cède et s'engage à payer des droits à Nokia, le conflit des brevets entre les deux firmes s'achève 158
- Nokia porte à nouveau plainte contre Apple pour violation de sept nouveaux brevets 158
- Quel est le code dont vous êtes le plus fier ? Pourquoi l'avez-vous écrit ? Et pourquoi vous a-t-il donné autant de satisfaction ? 83
- Le Draft final de la norme C++ 0X validé 181
Le Qt Labs au hasard
QLocale : à propos du temps (et des dates, et des langues, et des...)
Communauté
Ressources
- 91 cours et tutoriels Qt
- F.A.Q. Qt : 200 questions et réponses
- 48 Qt Quarterly, 35 Qt Labs et 22 Qt DevNet en français
- 43 outils Qt
- 99 sources Qt
- 26 binaires Qt
- 6 livres Qt et 9 critiques
- La documentation de Qt 4.7 en français : 157 classes, 70 concepts et 24 modules
- 3 certifications Qt
Liens utiles
Contact
- Vous souhaitez rejoindre la rédaction ou proposer un tutoriel, une traduction, une question... ? Postez dans le forum Contribuez ou contactez-nous par MP ou par email (voir en bas de page).
Qt dans le magazine
| Cette page est une traduction d'une page de la documentation de Qt, écrite par Nokia Corporation and/or its subsidiary(-ies). Les éventuels problèmes résultant d'une mauvaise traduction ne sont pas imputables à Nokia. | Qt 4.6 | |
| Copyright © 2012 Developpez LLC. Tous droits réservés Developpez LLC. Aucune reproduction, même partielle, ne peut être faite de ce site et de l'ensemble de son contenu : textes, documents et images sans l'autorisation expresse de Developpez LLC. Sinon, vous encourez selon la loi jusqu'à 3 ans de prison et jusqu'à 300 000 E de dommages et intérêts. Cette page est déposée à la SACD. | ||
| Vous avez déniché une erreur ? Un bug ? Une redirection cassée ? Ou tout autre problème, quel qu'il soit ? Ou bien vous désirez participer à ce projet de traduction ? N'hésitez pas à nous contacter ou par MP ! | ||
Copyright © 2000-2012 - www.developpez.com